Subversion Repositories pike-old

Compare Revisions

Ignore whitespace Rev 22 → Rev 23

/branches/7.6/debian/patches/11_pthread_stub.dpatch
0,0 → 1,32
#! /bin/sh
## 11_pthread_stub.dpatch by Magnus Holmgren <holmgren@debian.org>
##
## DP: Add check for stubbiness of pthread_atfork().
 
dpatch_patch() {
perl -pi - src/configure <<'END_PERL'
$already_patched = 1 if (/^\Q#if defined(__stub_pthread_atfork)\E/);
if (/\Qpthread_atfork(0,0,0)\E/ && !$already_patched) {
$found = 1; print <<'EOT';
#if defined(__stub_pthread_atfork) || defined(__stub___pthread_atfork)
#error pthread_atfork is just a stub
#endif
EOT
}
END { exit !$found }
END_PERL
}
 
dpatch_unpatch() {
perl -pi - src/configure <<'END_PERL'
if (/\Q#if defined(__stub_pthread_atfork)\E/ .. /#endif/) {
$found = 1; $_ = '';
}
END { exit !$found }
END_PERL
}
 
 
DPATCH_LIB_NO_DEFAULT=1
 
. /usr/share/dpatch/dpatch.lib.sh
Property changes:
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 7.6/debian/patches/00list
===================================================================
--- 7.6/debian/patches/00list (nonexistent)
+++ 7.6/debian/patches/00list (revision 23)
@@ -0,0 +1,7 @@
+01_master.in
+02_smartlink_rpath
+#04_make_variables_fpic
+05_install.pike
+07_dynamic_module_makefile.in-libgcc
+10_misplaced_MAXPATHLEN
+11_pthread_stub
Index: 7.6/debian/patches/01_master.in.dpatch
===================================================================
--- 7.6/debian/patches/01_master.in.dpatch (nonexistent)
+++ 7.6/debian/patches/01_master.in.dpatch (revision 23)
@@ -0,0 +1,25 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 01_master.in.dpatch by <magnus@kibibyte.se>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Add local site-pike directories to master.pike.in
+
+@DPATCH@
+diff -urNad trunk~/lib/master.pike.in trunk/lib/master.pike.in
+--- trunk~/lib/master.pike.in 2007-01-01 01:28:04.000000000 +0100
++++ trunk/lib/master.pike.in 2007-10-02 14:04:02.000000000 +0200
+@@ -1111,6 +1111,14 @@
+ add_module_path("¤lib_prefix¤/modules");
+ #endif
+
++ // Debian paths
++ add_include_path("/usr/local/include/pike");
++ add_include_path("/usr/local/include/pike"+__REAL_MAJOR__+"."+__REAL_MINOR__);
++ add_module_path("/usr/local/lib/pike/site_pike");
++ add_module_path("/usr/local/lib/pike"+__REAL_MAJOR__+"."+__REAL_MINOR__+"/site_pike");
++ add_module_path("/usr/local/share/pike/site_pike");
++ add_module_path("/usr/local/share/pike"+__REAL_MAJOR__+"."+__REAL_MINOR__+"/site_pike");
++
+ #if "¤include_prefix¤"[0]!='¤'
+ include_prefix = "¤include_prefix¤";
+ #endif
/7.6/debian/patches/01_master.in.dpatch
Property changes:
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 7.6/debian/patches/05_install.pike.dpatch
===================================================================
--- 7.6/debian/patches/05_install.pike.dpatch (nonexistent)
+++ 7.6/debian/patches/05_install.pike.dpatch (revision 23)
@@ -0,0 +1,28 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 05_install.pike.dpatch by <magnus@proffe.kibibyte.se>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Allow include_prefix to be separately overridden in install.pike
+
+@DPATCH@
+diff -urNad trunk~/src/Makefile.in trunk/src/Makefile.in
+--- trunk~/src/Makefile.in 2006-10-20 15:40:28.000000000 +0200
++++ trunk/src/Makefile.in 2007-09-26 09:51:13.000000000 +0200
+@@ -53,7 +53,7 @@
+ # TESTARGS = -F -a
+
+ # Arguments for install.pike used by the install targets.
+-INSTALLARGS = --new-style
++INSTALLARGS ?= --new-style
+
+ #
+ # use bison please, yacc isn't good enough.
+@@ -506,7 +506,7 @@
+ MANDIR_SRC="$(MANDIR_SRC)" \
+ man_prefix="$(man_prefix)" pike_name=$(pike_name) \
+ fakeroot="$(buildroot)" PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)" \
+- $(INSTALLARGS)
++ include_prefix="$(include_prefix)" $(INSTALLARGS)
+
+ install_interactive: pike tools
+ @$(RUNPIKE) $(TMP_BINDIR)/install.pike --interactive \
/7.6/debian/patches/05_install.pike.dpatch
Property changes:
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 7.6/debian/patches/10_misplaced_MAXPATHLEN.dpatch
===================================================================
--- 7.6/debian/patches/10_misplaced_MAXPATHLEN.dpatch (nonexistent)
+++ 7.6/debian/patches/10_misplaced_MAXPATHLEN.dpatch (revision 23)
@@ -0,0 +1,31 @@
+#!/bin/sh /usr/share/dpatch/dpatch-run
+## 10_misplaced_MAXPATHLEN.dpatch by Samuel Thibault <samuel.thibault@ens-lyon.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Move reserve MAXPATHLEN definition up.
+
+@DPATCH@
+
+--- pike7.6-7.6.112.orig/src/modules/files/efuns.c 2007-07-24 23:08:26.932458000 +0000
++++ pike7.6-7.6.112/src/modules/files/efuns.c 2007-07-24 23:09:58.626801000 +0000
+@@ -106,6 +106,10 @@
+
+ #endif
+
++#ifndef MAXPATHLEN
++#define MAXPATHLEN 32768
++#endif
++
+ struct array *encode_stat(PIKE_STAT_T *s)
+ {
+ struct array *a;
+@@ -1113,9 +1117,6 @@
+ size*=2;
+ } while (size < 10000);
+ #else
+-#ifndef MAXPATHLEN
+-#define MAXPATHLEN 32768
+-#endif
+ tmp=xalloc(MAXPATHLEN+1);
+ THREADS_ALLOW_UID();
+ e = getwd(tmp);
Index: 7.6/debian/patches/07_dynamic_module_makefile.in-libgcc.dpatch
===================================================================
--- 7.6/debian/patches/07_dynamic_module_makefile.in-libgcc.dpatch (nonexistent)
+++ 7.6/debian/patches/07_dynamic_module_makefile.in-libgcc.dpatch (revision 23)
@@ -0,0 +1,19 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 07_dynamic_module_makefile.in-libgcc.dpatch by <magnus@proffe.kibibyte.se>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Figure out LIBGCC name.
+
+@DPATCH@
+
+--- 7.6/src/modules/dynamic_module_makefile.in 2005-12-30 14:33:50.110303750 +0100
++++ 7.6.fix/src/modules/dynamic_module_makefile.in 2005-12-30 14:50:03.367128500 +0100
+@@ -2,7 +2,7 @@
+ # $Id: 07_dynamic_module_makefile.in-libgcc.diff,v 1.1 2006/01/03 16:03:38 grendel Exp $
+ #
+
+-LIBGCC=@LIBGCC@
++LIBGCC=$(shell gcc -print-libgcc-file-name)
+ LC_REQ=@LC_REQ@
+
+ LINKAGE_CPPFLAGS=
/7.6/debian/patches/07_dynamic_module_makefile.in-libgcc.dpatch
Property changes:
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 7.6/debian/patches/02_smartlink_rpath.dpatch
===================================================================
--- 7.6/debian/patches/02_smartlink_rpath.dpatch (nonexistent)
+++ 7.6/debian/patches/02_smartlink_rpath.dpatch (revision 23)
@@ -0,0 +1,50 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 02_smartlink_rpath.dpatch by <magnus@proffe.kibibyte.se>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Make smartlink not use -rpath
+
+@DPATCH@
+
+--- pike7.3-7.3.51.orig/bin/smartlink
++++ pike7.3-7.3.51/bin/smartlink
+@@ -147,9 +147,8 @@
+ LDOPTS="$LDOPTS -R$RPATH"
+ ;;
+ Linux\ 2.*)
+- if test x$LINKING != xno -a "x$RPATH" != x ; then
+- LDOPTS="$LDOPTS -Wl,-rpath,$RPATH"
+- fi
++ LD_LIBRARY_PATH="$RPATH"
++ export LD_LIBRARY_PATH
+ ;;
+ UnixWare\ 7.*)
+ if test x$LINKING != xno -a "x$RPATH" != x ; then
+--- pike7.5-7.5.3/src/smartlink.c.orig 2003-01-17 20:13:38.000000000 +0100
++++ pike7.3-7.5.3/src/smartlink.c 2003-03-20 16:58:02.000000000 +0100
+@@ -146,7 +146,7 @@
+ full_rpath = rpath;
+
+ #ifdef USE_Wl
+- strcat(rpath, "-Wl,-rpath,");
++ /* strcat(rpath, "-Wl,-rpath,"); */
+ #elif defined(USE_Wl_R)
+ strcat(rpath, "-Wl,-R");
+ #elif defined(USE_R)
+@@ -258,7 +258,7 @@
+ }
+ rpath_in_use |= add_path(rpath, ld_lib_path);
+ }
+-
++#if 0
+ if (rpath_in_use) {
+ /* Delete the terminating ':' */
+ rpath[strlen(rpath) - 1] = 0;
+@@ -305,6 +305,7 @@
+ #error Unknown method
+ #endif
+ }
++#endif
+
+ new_argv[new_argc++] = NULL;
+
/7.6/debian/patches/02_smartlink_rpath.dpatch
Property changes:
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 7.6/debian/patches/04_make_variables_fpic.dpatch
===================================================================
--- 7.6/debian/patches/04_make_variables_fpic.dpatch (nonexistent)
+++ 7.6/debian/patches/04_make_variables_fpic.dpatch (revision 23)
@@ -0,0 +1,21 @@
+#! /bin/sh /usr/share/dpatch/dpatch-run
+## 04_make_variables_fpic.dpatch by <magnus@proffe.kibibyte.se>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Add -fPIC to OTHERFLAGS and NOOPTFLAGS in src/make_variables.in
+
+@DPATCH@
+
+--- pike7.6-7.6.27/src/make_variables.in 2004-04-23 17:41:33.000000000 +0200
++++ pike7.6-7.6.27.new/src/make_variables.in 2005-06-18 04:19:00.278899432 +0200
+@@ -26,8 +26,8 @@ RUNPIKE=$(@RUNPIKE@)
+ OPTIMIZE=@OPTIMIZE@
+ INSTALL=@INSTALL@
+ WARN=@WARN@
+-OTHERFLAGS=@CFLAGS@ $(OSFLAGS) $(OPTIMIZE) $(WARN) $(PROFIL)
+-NOOPTFLAGS=@CFLAGS@ @CPPFLAGS@ $(OSFLAGS) $(WARN) $(PROFIL)
++OTHERFLAGS=@CFLAGS@ $(OSFLAGS) $(OPTIMIZE) $(WARN) $(PROFIL) -fPIC
++NOOPTFLAGS=@CFLAGS@ @CPPFLAGS@ $(OSFLAGS) $(WARN) $(PROFIL) -fPIC
+ AR=@AR@
+ SRCDIR=@srcdir@
+ PMOD_TARGETS=@PMOD_TARGETS@
/7.6/debian/patches/04_make_variables_fpic.dpatch
Property changes:
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 7.6/debian/changelog
===================================================================
--- 7.6/debian/changelog (nonexistent)
+++ 7.6/debian/changelog (revision 23)
@@ -0,0 +1,1179 @@
+pike7.6 (7.6.112-2) unstable; urgency=low
+
+ * Increase Standards-Version to 3.7.3:
+ * debian/menu: change section from Apps/Programming to
+ Applications/Programming.
+ * Fix capitalization issues in package descriptions and remove
+ superfluous occurrences of upstream homepage URL.
+ * New maintainer email address.
+ * Work around build failures on alpha by removing build-indep from the
+ prerequisites of build.
+ * Drop the versioned dependency on freeglut3-dev (>= 2.2.0-6.1) for
+ alpha and hppa since even sarge has 2.2.0-8.
+ * Correct doc-base section according to new section list.
+ * 11_pthread_stub.dpatch: Make sure configure doesn't think
+ pthread_atfork() works just because it exists, when it's in fact a
+ stub. (Closes: #462998). Thanks to Samuel Thibault.
+
+ -- Magnus Holmgren <holmgren@debian.org> Fri, 09 May 2008 21:11:28 +0200
+
+pike7.6 (7.6.112-1) unstable; urgency=low
+
+ [ Henrik Andreasson ]
+ * The latest upstream release
+
+ [ Magnus Holmgren ]
+ * New maintainers (Closes: #411684).
+ * Use dpatch to apply patches.
+ * really apply the following patches from the .93-4 release:
+ * Removed Image TTF module to drop the dependency on oldlibs
+ `freetype1'. (Closes: #431784)
+ * Added a patch by Samuel Thibault to fix a FTBFS bug on hurd-i386.
+ (Closes: #434581)
+ * Radically clean up debian/rules (Closes: #424334).
+ * Manuals are again built during the binary build process so that
+ official tarballs can be used to build the package.
+ * Delete redundant dhelp files (dhelp uses doc-base metadata since
+ long ago).
+ * Change directory structure and get rid of an unnecessary directory level
+ (by installing with --traditional instead of --new-style):
+ - Pike modules and include files, and master.pike are now in
+ /usr/lib/pike/<version> instead of /usr/lib/pike/<version>/lib.
+ - The pike executable is now in /usr/bin itself, instead of in
+ /usr/lib/pike/<version>/bin with a symlink in /usr/bin.
+ - .pike and .pmod files are no longer moved to /usr/share/pike. It's
+ not that important that all files in /usr/lib are actually
+ platform-specific. All the symlinks are thus eliminated.
+ * Move modules GLU and GLUE to pike7.6-gl, where they belong.
+ GLUE.Drivers.GTK removed since it depends on GTK, which was dropped
+ previously.
+ * Make pike7.6-dev Architecture: any.
+ * No longer use own version of specs.in - fix the configure parameters
+ instead.
+ * Fix 01_master.in.dpatch - the Debian-specific add_*_path() calls were
+ completely off.
+ * Add debian/watch (checking for latest official stable release).
+ * Drop 03_language.yacc_bison_fix.dpatch; it no longer has any effect.
+ * Add Mird to the module exclusion list.
+ * Add Vcs fields to debian/control.
+
+ -- Magnus Holmgren <magnus@kibibyte.se> Fri, 21 Dec 2007 09:29:03 +0100
+
+pike7.6 (7.6.93-4) unstable; urgency=low
+
+ * QA upload.
+ * Removed Image TTF module to drop the dependency on oldlibs
+ `freetype1'. (Closes: #431784)
+ * Added a patch by Samuel Thibault to fix a FTBFS bug on hurd-i386.
+ (Closes: #434581)
+ * Converted `debian/copyright' to UTF-8.
+ * Make the package binNMU-able by appropriately replacing `Source-Version'
+ in `debian/control'.
+ * Added a `Homepage' field.
+
+ -- Philipp Kern <pkern@debian.org> Sun, 16 Dec 2007 18:55:16 +0100
+
+pike7.6 (7.6.93-3) unstable; urgency=low
+
+ * QA upload.
+ * Set maintainer to QA Group; Orphaned: #411684
+ * Conforms with latest Standards Version 3.7.2
+ * Remove duplicate build-dependency on debhelper
+ * Add quotes to debian/menu
+
+ -- Michael Ablassmeier <abi@debian.org> Thu, 15 Mar 2007 10:29:51 +0100
+
+pike7.6 (7.6.93-2) unstable; urgency=low
+
+ * Please change postgresql-dev build dependency to libpq-dev (Closes:
+ #409770)
+
+ -- Marek Habersack <grendel@debian.org> Tue, 13 Feb 2007 18:41:28 +0100
+
+pike7.6 (7.6.93-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+ * Please don't ship pike7.6-gtk (Closes: #387503)
+ gtk1 modules removed because of debian dropping support for gtk1.
+ At the same time, the pike7.6-gtk module is disabled, since gtk2
+ stuff in it doesn't seem to compile without gtk1 devel packages
+ around.
+ * pike epoll not included. (Closes: #264206)
+ This can only be fixed by making sure that the debian autobuilders
+ all support epoll, which is beyond the pike maintainer's powers :)
+
+ -- Marek Habersack <grendel@debian.org> Wed, 4 Oct 2006 13:11:55 +0200
+
+pike7.6 (7.6.92-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Mon, 2 Oct 2006 15:20:43 +0200
+
+pike7.6 (7.6.91-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Thu, 14 Sep 2006 14:44:33 +0200
+
+pike7.6 (7.6.90-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Thu, 14 Sep 2006 14:42:53 +0200
+
+pike7.6 (7.6.89-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Tue, 22 Aug 2006 18:26:40 +0200
+
+pike7.6 (7.6.88-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 22 Aug 2006 18:16:59 +0200
+
+pike7.6 (7.6.87-2) unstable; urgency=low
+
+ * Shortened the long descriptions of several binary packages
+ * Added short description of pike, plus an url, to the description of
+ the pike modules binary packages
+
+ -- Marek Habersack <grendel@debian.org> Sun, 9 Aug 2006 01:28:37 +0200
+
+pike7.6 (7.6.87-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Sun, 4 Jun 2006 22:21:07 +0200
+
+pike7.6 (7.6.86-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Sun, 4 Jun 2006 22:17:43 +0200
+
+pike7.6 (7.6.85-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Sun, 4 Jun 2006 15:33:52 +0200
+
+pike7.6 (7.6.84-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Sun, 4 Jun 2006 15:29:49 +0200
+
+pike7.6 (7.6.83-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Thu, 1 Jun 2006 10:29:09 +0200
+
+pike7.6 (7.6.82-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Thu, 1 Jun 2006 10:26:10 +0200
+
+pike7.6 (7.6.81-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Thu, 1 Jun 2006 9:42:41 +0200
+
+pike7.6 (7.6.80-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Thu, 1 Jun 2006 9:38:38 +0200
+
+pike7.6 (7.6.79-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Fri, 26 May 2006 8:03:10 +0200
+
+pike7.6 (7.6.78-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Fri, 26 May 2006 7:53:46 +0200
+
+pike7.6 (7.6.77-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Wed, 17 May 2006 10:58:45 +0200
+
+pike7.6 (7.6.76-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 17 May 2006 10:56:26 +0200
+
+pike7.6 (7.6.75-3) unstable; urgency=low
+
+ * New GL dependency
+
+ -- Marek Habersack <grendel@debian.org> Wed, 10 May 2006 11:51:03 +0200
+
+pike7.6 (7.6.75-2) unstable; urgency=low
+
+ * Cleanup build-dependencies (Closes: #365787)
+ libpng3-dev -> libpng12-dev
+ 'freeglut3-dev | libglut3-dev' -> freeglut3-dev
+ Patch from Stefan Huehner <stefan@huehner.org>, thanks.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 9 May 2006 21:56:32 +0200
+
+pike7.6 (7.6.75-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+ * Removed the ssl fix patch since the upstream contains a better one
+ now.
+ * pike7.6-mysql: Uinstallable; dependency on libmysqlclient15
+ (Closes: #360325)
+ Recompiled to correct the binary dependencies.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 5 Apr 2006 12:59:11 +0200
+
+pike7.6 (7.6.74-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Sun, 2 Apr 2006 20:08:53 +0200
+
+pike7.6 (7.6.73-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Sun, 2 Apr 2006 12:51:39 +0200
+
+pike7.6 (7.6.72-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Sun, 2 Apr 2006 12:50:37 +0200
+
+pike7.6 (7.6.71-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Sun, 2 Apr 2006 12:47:53 +0200
+
+pike7.6 (7.6.70-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Sun, 2 Apr 2006 12:43:57 +0200
+
+pike7.6 (7.6.69-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+ * not installable in sid (Closes: #359231)
+ Made the meta packages binary NMU safe
+ * Added an SSL fix that should fix steam
+ * pike7.6-core: doesn't clean out /usr/local stuff (Closes: #355413)
+ The directories are removed on purge in postrm if they are empty.
+
+ -- Marek Habersack <grendel@debian.org> Thu, 30 Mar 2006 12:51:20 +0200
+
+pike7.6 (7.6.68-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Thu, 2 Mar 2006 23:47:25 +0100
+
+pike7.6 (7.6.67-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+ * Please upgrade build depends to libmysqlclient15-dev (Closes:
+ #343794)
+ * The pike package is present in sarge but missing from etch. (Closes:
+ #342650)
+
+ -- Marek Habersack <grendel@debian.org> Tue, 31 Jan 2006 21:28:38 +0100
+
+pike7.6 (7.6.66-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Sun, 22 Jan 2006 21:46:24 +0100
+
+pike7.6 (7.6.65-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Fri, 6 Jan 2006 18:44:19 +0100
+
+pike7.6 (7.6.64-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Fri, 6 Jan 2006 18:43:05 +0100
+
+pike7.6 (7.6.63-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Fri, 6 Jan 2006 17:31:52 +0100
+
+pike7.6 (7.6.62-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Fri, 6 Jan 2006 17:30:24 +0100
+
+pike7.6 (7.6.61-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+ * dynamic_module_makefile moved to pike7.6-core since it contains
+ platform-specific stuff. Also included a patch to detect the
+ libgcc.a path dynamically.
+ * pike7.6-dev depends on pike7.6-core now. It is necessary to both
+ pull in dynamic_module_makefile and to enable compilation of modules
+ with pike -x
+ * Updated the patch for include_prefix change in install.pike
+ * Closes: Bug#345329: pike-public.parser.xml2 - FTBFS:
+ gcc: /usr/lib/gcc/i486-linux-gnu/4.0.3/libgcc.a: No such file or
+ directory - Debian Bug report logs
+ * Closes: Bug#345330: pike-public.network.pcap - FTBFS:
+ gcc: /usr/lib/gcc/i486-linux-gnu/4.0.3/libgcc.a: No such file or
+ directory - Debian Bug report logs
+
+ -- Marek Habersack <grendel@debian.org> Fri, 30 Dec 2005 17:35:50 +0100
+
+pike7.6 (7.6.60-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 21 Dec 2005 0:23:28 +0100
+
+pike7.6 (7.6.59-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Tue, 20 Dec 2005 15:28:39 +0100
+
+pike7.6 (7.6.58-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 20 Dec 2005 15:26:59 +0100
+
+pike7.6 (7.6.57-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Mon, 19 Dec 2005 5:06:53 +0100
+
+pike7.6 (7.6.56-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Mon, 19 Dec 2005 5:05:38 +0100
+
+pike7.6 (7.6.55-2) unstable; urgency=low
+
+ * Fix for -x module
+
+ -- Marek Habersack <grendel@debian.org> Sun, 4 Dec 2005 02:58:15 +0100
+
+pike7.6 (7.6.55-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Fri, 2 Dec 2005 13:16:33 +0100
+
+pike7.6 (7.6.54-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Fri, 2 Dec 2005 13:13:38 +0100
+
+pike7.6 (7.6.53-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+ * One more monger fix
+ * A kFreeBSD build fix
+
+ -- Marek Habersack <grendel@debian.org> Tue, 29 Nov 2005 17:34:06 +0100
+
+pike7.6 (7.6.52-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 29 Nov 2005 17:25:19 +0100
+
+pike7.6 (7.6.51-2) unstable; urgency=low
+
+ * pike7.6_7.6.33-2 (alpha/unstable): FTBFS: glibc aborts in free()
+ (Closes: #333072)
+ * pike7.4-core: doesn't clean out /usr/local stuff (Closes: #339963)
+
+ -- Marek Habersack <grendel@debian.org> Mon, 21 Nov 2005 21:21:23 +0100
+
+pike7.6 (7.6.51-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+ * Some fixes to make pike -x module work better on Debian.
+ * Manuals are no longer built during the binary build process. Instead,
+ they are contained in the .orig tarball.
+
+ -- Marek Habersack <grendel@debian.org> Mon, 21 Nov 2005 21:20:49 +0100
+
+pike7.6 (7.6.50-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 2 Nov 2005 17:38:26 +0100
+
+pike7.6 (7.6.49-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Mon, 31 Oct 2005 12:46:27 +0100
+
+pike7.6 (7.6.48-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Mon, 31 Oct 2005 12:42:24 +0100
+
+pike7.6 (7.6.47-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Wed, 26 Oct 2005 9:50:48 +0200
+
+pike7.6 (7.6.46-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 26 Oct 2005 9:49:35 +0200
+
+pike7.6 (7.6.45-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Tue, 25 Oct 2005 14:23:53 +0200
+
+pike7.6 (7.6.44-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 25 Oct 2005 14:22:34 +0200
+
+pike7.6 (7.6.43-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Tue, 25 Oct 2005 10:38:49 +0200
+
+pike7.6 (7.6.42-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 25 Oct 2005 10:37:42 +0200
+
+pike7.6 (7.6.41-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Mon, 24 Oct 2005 11:59:56 +0200
+
+pike7.6 (7.6.40-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Mon, 24 Oct 2005 11:58:49 +0200
+
+pike7.6 (7.6.39-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Mon, 17 Oct 2005 12:13:55 +0200
+
+pike7.6 (7.6.38-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Mon, 17 Oct 2005 12:12:44 +0200
+
+pike7.6 (7.6.37-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Wed, 12 Oct 2005 1:34:07 +0200
+
+pike7.6 (7.6.36-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 12 Oct 2005 1:31:42 +0200
+
+pike7.6 (7.6.35-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Sat, 20 Aug 2005 16:26:02 +0200
+
+pike7.6 (7.6.34-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Sat, 20 Aug 2005 16:24:41 +0200
+
+pike7.6 (7.6.33-2) unstable; urgency=low
+
+ * /usr/lib/pike/7.6.24/include/pike/specs is missing (Closes: #322851)
+ Using own version of specs.in, since the pike-generated one does not
+ make sense on a Debian system.
+ * Updated the Standards-Version, no changes
+
+ -- Marek Habersack <grendel@debian.org> Tue, 16 Aug 2005 13:38:09 +0200
+
+pike7.6 (7.6.33-1) unstable; urgency=high
+
+ * The latest cvs snapshot
+ * Again urgency high to rush the recompile so that Caudium 1.4 can
+ be recompiled on the non-x86 architectures. The previous upload
+ of Pike was a bit rushed.
+
+ -- Marek Habersack <grendel@debian.org> Thu, 28 Jul 2005 13:04:41 +0200
+
+pike7.6 (7.6.32-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Thu, 28 Jul 2005 13:02:47 +0200
+
+pike7.6 (7.6.31-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Wed, 27 Jul 2005 14:24:49 +0200
+
+pike7.6 (7.6.30-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 27 Jul 2005 14:22:53 +0200
+
+pike7.6 (7.6.29-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Fri, 22 Jul 2005 22:20:25 +0200
+
+pike7.6 (7.6.28-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Fri, 22 Jul 2005 22:18:34 +0200
+
+pike7.6 (7.6.27-2) unstable; urgency=high
+
+ * Force a recompile to match the new libgmp3 package name
+
+ -- Marek Habersack <grendel@debian.org> Tue, 19 Jul 2005 12:06:53 +0200
+
+pike7.6 (7.6.27-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Thu, 26 May 2005 02:12:22 +0200
+
+pike7.6 (7.6.24-2) unstable; urgency=low
+
+ * Closes: #310631: debian/rules version detection could be better
+ Thanks to Matthias Klose <doko@cs.tu-berlin.de> for providing the
+ patch.
+ * Closes: #282939: fails to start in interactive mode
+ No longer happens with the newer Pike 7.6 versions.
+
+ -- Marek Habersack <grendel@debian.org> Thu, 26 May 2005 02:48:36 +0200
+
+pike7.6 (7.6.24-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 22 Sep 2004 20:19:24 +0200
+
+pike7.6 (7.6.23-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Wed, 22 Sep 2004 17:52:43 +0200
+
+pike7.6 (7.6.22-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 22 Sep 2004 17:49:52 +0200
+
+pike7.6 (7.6.21-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Tue, 21 Sep 2004 0:24:04 +0200
+
+pike7.6 (7.6.20-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 21 Sep 2004 0:18:16 +0200
+
+pike7.6 (7.6.19-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Mon, 20 Sep 2004 23:35:37 +0200
+
+pike7.6 (7.6.18-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Mon, 20 Sep 2004 23:31:42 +0200
+
+pike7.6 (7.6.17-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Sun, 19 Sep 2004 16:42:33 +0200
+
+pike7.6 (7.6.16-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Sun, 19 Sep 2004 16:39:58 +0200
+
+pike7.6 (7.6.15-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Fri, 17 Sep 2004 13:26:37 +0200
+
+pike7.6 (7.6.14-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Fri, 17 Sep 2004 13:21:58 +0200
+
+pike7.6 (7.6.13-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Tue, 10 Aug 2004 15:32:25 +0200
+
+pike7.6 (7.6.12-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 10 Aug 2004 15:29:54 +0200
+
+pike7.6 (7.6.11-3) unstable; urgency=medium
+
+ * Gotten rid of gdk-imlib1-dev build dependency
+ * Delayed upload to wait for the indirect dependencies to get into
+ the archives.
+
+ -- Marek Habersack <grendel@debian.org> Fri, 30 Jul 2004 14:36:10 +0200
+
+pike7.6 (7.6.11-2) unstable; urgency=medium
+
+ * Changed the build-dep from libxpm4-dev to libxpm-dev
+ * Changed the build-dep from libtiff3g-dev to libtiff4-dev
+
+ -- Marek Habersack <grendel@debian.org> Sun, 25 Jul 2004 02:25:22 +0200
+
+pike7.6 (7.6.11-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Thu, 1 Jul 2004 23:05:30 +0200
+
+pike7.6 (7.6.10-1) unstable; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Thu, 1 Jul 2004 23:03:26 +0200
+
+pike7.6 (7.6.9-2) unstable; urgency=low
+
+ * Make sure all bugs filed against Pike 7.4 will not appear here
+ * Pike 7.6 will replace Pike 7.4 in Debian soon.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 9 Jun 2004 13:40:35 +0200
+
+pike7.6 (7.6.9-1) unstable; urgency=low
+
+ * The latest cvs snapshot
+ * Added the full text of MPL 1.1 to the debian/copyright file
+
+ -- Marek Habersack <grendel@debian.org> Mon, 17 May 2004 20:14:30 +0200
+
+pike7.6 (7.6.8-1) experimental; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Mon, 17 May 2004 20:12:55 +0200
+
+pike7.6 (7.6.7-2) unstable; urgency=low
+
+ * Better dependencies for the GL libraries
+
+ -- Marek Habersack <grendel@debian.org> Tue, 11 May 2004 16:18:21 +0200
+
+pike7.6 (7.6.7-1) unstable; urgency=low
+
+ * The latest upstream release. The most important changes since v7.4
+ are listed in the upstream CHANGES file in the /usr/share/doc/pike7.6
+ directory
+
+ -- Marek Habersack <grendel@debian.org> Wed, 5 May 2004 18:38:38 +0200
+
+pike7.6 (7.6.6-1) experimental; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 5 May 2004 18:35:56 +0200
+
+pike7.6 (7.6.5-1) experimental; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Sat, 1 May 2004 18:35:04 +0200
+
+pike7.6 (7.6.4-1) experimental; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Marek Habersack <grendel@debian.org> Sat, 1 May 2004 18:32:26 +0200
+
+pike7.6 (7.6.3-1) experimental; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Mon, 26 Apr 2004 2:19:59 +0200
+
+pike7.6 (7.6.2-1) experimental; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Pike build system <pike-devel@lists.lysator.liu.se> Mon, 26 Apr 2004 2:17:57 +0200
+
+pike7.5 (7.5.27-2) experimental; urgency=low
+
+ * The latest CVS snapshot
+
+ -- Marek Habersack <grendel@debian.org> Fri, 23 Apr 2004 17:49:47 +0200
+
+pike7.5 (7.5.27-1) experimental; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Pike build system <pike-devel@lists.lysator.liu.se> Sat, 17 Apr 2004 17:57:50 +0200
+
+pike7.5 (7.5.26-1) experimental; urgency=low
+
+ * Release number bumped by export.pike.
+
+ -- Pike build system <pike-devel@lists.lysator.liu.se> Sat, 17 Apr 2004 17:56:36 +0200
+
+pike7.5 (7.5.25-1) experimental; urgency=low
+
+ * The latest CVS snapshot
+
+ -- Marek Habersack <grendel@debian.org> Sun, 4 Apr 2004 01:48:49 +0200
+
+pike7.5 (7.5.23-2) experimental; urgency=low
+
+ * The latest CVS update
+
+ -- Marek Habersack <grendel@debian.org> Fri, 2 Apr 2004 16:49:26 +0200
+
+pike7.5 (7.5.23-1) experimental; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Mon, 29 Mar 2004 17:28:21 +0200
+
+pike7.5 (7.5.21-1) experimental; urgency=low
+
+ * The latest cvs snapshot
+
+ -- Marek Habersack <grendel@debian.org> Wed, 17 Mar 2004 14:13:19 +0100
+
+pike7.5 (7.5.19-2) experimental; urgency=low
+
+ * Creation of directories in /usr/local won't fail now
+ (closes: Bug#234694)
+
+ -- Marek Habersack <grendel@debian.org> Thu, 26 Feb 2004 01:28:15 +0100
+
+pike7.5 (7.5.19-1) experimental; urgency=low
+
+ * The latest upstream update
+
+ -- Marek Habersack <grendel@debian.org> Mon, 23 Feb 2004 22:42:46 +0100
+
+pike7.5 (7.5.17-2) experimental; urgency=low
+
+ * Latest CVS snapshot.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 14 Jan 2004 19:53:42 +0100
+
+pike7.5 (7.5.17-1) experimental; urgency=low
+
+ * The latest cvs snapshot.
+ * Disabled using the machine code in the pike bytecode. It poses a
+ security risk and breaks under kernels with exec-shield or PAX.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 9 Dec 2003 17:01:16 +0100
+
+pike7.5 (7.5.12-2) experimental; urgency=low
+
+ * Added libnettle to the build dependencies.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 11 Nov 2003 18:24:24 +0100
+
+pike7.5 (7.5.12-1) experimental; urgency=low
+
+ * Catching up on version numbers.
+ * First upload to Debian/experimental.
+
+ -- Marek Habersack <grendel@debian.org> Sat, 30 Oct 2003 22:46:18 +0100
+
+pike7.5 (7.5.5-1) unstable; urgency=low
+
+ * Latest upstream version.
+
+ -- Marek Habersack <grendel@debian.org> Sat, 29 Mar 2003 01:46:01 +0100
+
+pike7.5 (7.5.3-2) unstable; urgency=low
+
+ * Latest upstream version.
+ * Rediffed the Debian patches to work with the current sources.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 19 Mar 2003 13:42:44 +0100
+
+pike7.5 (7.5.3-1) unstable; urgency=low
+
+ * Latest upstream version.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 5 Feb 2003 19:07:40 +0100
+
+pike7.5 (7.5.2-1) unstable; urgency=low
+
+ * Latest upstream version.
+ * No sparc machine code for now.
+ * Updated the mesagl dependencies.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 5 Feb 2003 01:19:37 +0100
+
+pike7.5 (7.5.1-3) unstable; urgency=low
+
+ * A bug in the sparc machine code causing a segfault was fixed.
+
+ -- Marek Habersack <grendel@debian.org> Mon, 3 Feb 2003 17:16:46 +0100
+
+pike7.5 (7.5.1-2) unstable; urgency=low
+
+ * Pike is installed using the --new-style layout now.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 28 Jan 2003 00:36:59 +0100
+
+pike7.5 (7.5.1-1) unstable; urgency=low
+
+ * Latest upstream version.
+
+ -- Marek Habersack <grendel@debian.org> Fri, 6 Dec 2002 05:20:15 +0100
+
+pike7.3 (7.3.62-1) unstable; urgency=low
+
+ * Latest upstream version. The most important changes:
+ * lib/modules/Tools.pmod/AutoDoc.pmod/DocParser.pmod: Fixed broken
+ support for typedef.
+ * src/modules/Gz/module.pmod.in: Now supports zlib's which lack the
+ eof() function.
+ * src/modules/Gz/module.pmod.in: Now behaves if zlib isn't
+ available.
+ * src/builtin_functions.c: Moved some debug functions to Debug.
+ Updated sleep doc. Fixed describe_backtrace type.
+ * src/builtin.cmod: Move _describe_program to
+ Debug.describe_program.
+ * src/modules/Gz/testsuite.in: Added test for Gz.File().
+ * lib/modules/MIME.pmod/module.pmod: When doing guessy style MIME
+ decoding, inherit the guess attribute for multipart message parts.
+ * src/modules/Gz/zlibmod.c: Fixed nasty null-termination bug.
+ * src/post_modules/Shuffler/Shuffler.cmod: Patched Shuffler module
+ some more. This patch should fix some of the problems with the
+ shuffler accessing references that have been destructed.
+ * lib/modules/Filesystem.pmod/Tar.pmod: Bugfix: Since lookups are
+ done with normalized paths, we need to normalize the paths in
+ filename{s,_to_entry} as well to get proper matches.
+ * src/pike_memory.h: Added a macro to detect whether a memory
+ checker is in use, so that conflicting debug checks can be avoided.
+ * lib/master.pike.in, src/svalue.c,
+ lib/modules/Tools.pmod/testsuite.in: Make %O default output for
+ objects and programs better.
+ * lib/modules/Stdio.pmod/module.pmod, src/modules/files/file.c,
+ src/modules/files/termios.c: Document the low level I/O functions
+ in Stdio.File and not Fd.
+ .
+ Designwise motivation: Fd and Fd_ref ought to be considered
+ internal; Stdio.File is the lowest "official" API level.
+ .
+ Practical motivation: It's _much_ easier to find the functions in
+ the generated docs, despite the small pointer to Fd in Stdio.File.
+ * lib/modules/Protocols.pmod/HTTP.pmod/Server.pmod/SSLPort.pike:
+ added SSL support to the simple webserver. Based on SSL.https, but
+ behaves exactly like Protocols.HTTP.Server.Port, except for SSL.
+ * lib/master.pike.in: - Changed some search(x,y)!=-1 into
+ has_value(x,y) - Optimized Getopt call by using local variables for
+ NO_ARG, MAY_HAVE_ARG and HAS_ARG. - Optimized Getopt call by
+ always having five elements per argument, so that Getopt need not
+ rewrite the array. - Always accept the --autoreload option so that
+ we are silenty ignoring it if Pike has not autoreload (instead of
+ bailing out with strange error messages (that changes depending
+ on the number and order of options)).
+
+ -- Marek Habersack <grendel@debian.org> Mon, 25 Nov 2002 18:43:54 +0100
+
+pike7.3 (7.3.60-2) unstable; urgency=low
+
+ * Latest cvs snapshot. The most important changes:
+ * lib/modules/Protocols.pmod/HTTP.pmod/module.pmod: Added missing
+ file argument for put_url().
+ * lib/modules/Array.pmod: CHANGES says that there should be an
+ Array.Iterator. So let's have one.
+ * lib/modules/Parser.pmod/XML.pmod/DOM.pmod: Added iterators, nice
+ _sprintf to Nodes, and made all lfuns static.
+ * src/post_modules/Shuffler/Shuffler.cmod: If the done-callback
+ destroyed the shuffler object, the shuffler crashed when signaling
+ that data wasn't sent thru the give_back function. This might have
+ other implications but seems to work as a fix for now.
+
+ -- Marek Habersack <grendel@debian.org> Sat, 9 Nov 2002 19:46:43 +0100
+
+pike7.3 (7.3.60-1) unstable; urgency=low
+
+ * Latest upstream version. The most important changes:
+ * src/code/: ppc32.c, ppc32.h: Implemented OPCODE_INLINE_BRANCH
+ interface for PPC.
+ * src/dlopen.c: Some more IA64 fixes.
+ * lib/modules/Protocols.pmod/HTTP.pmod/Query.pike: added the
+ possibility to have array values in headers mapping to allow
+ multiple headers
+ * src/dlopen.c: The IA64 global offset table is now at the end of
+ the datasegment, so that gp-relative offsets have a chance at
+ working.
+ * lib/modules/Standards.pmod/RDF.pike: Improved API and working
+ N-triple parsing.
+ * src/threads.c: Added a reference from MutexKey to the mutex
+ object it holds, so that the latter won't be refcount garbed (which
+ causes both to be destructed) if there are no other references.
+
+ -- Marek Habersack <grendel@debian.org> Mon, 4 Nov 2002 22:32:36 +0100
+
+pike7.3 (7.3.58-3) unstable; urgency=low
+
+ * Removed the sybase module as it doesn't work on Debian.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 23 Oct 2002 02:16:53 +0200
+
+pike7.3 (7.3.58-2) unstable; urgency=low
+
+ * Latest CVS snapshot.
+
+ -- Marek Habersack <grendel@debian.org> Mon, 21 Oct 2002 03:01:06 +0200
+
+pike7.3 (7.3.58-1) unstable; urgency=low
+
+ * Latest upstream version. The most important changes:
+ * lib/modules/Parser.pmod/XML.pmod/Tree.pmod: Better typing.
+ * lib/modules/Array.pmod: Fixed a border problem in Array.sum
+ * src/builtin.cmod: Fixed leak of the strings "string" and "int".
+ * lib/modules/String.pmod/module.pmod: Removed the deprecated
+ strmult and String_buffer (compatibility is already in place).
+ Fixed a soundex bug. Made int2roman and int2size throw an error
+ when input is out of range. Fixed an off by one error for the
+ bytes/kb transition in int2size.
+ * lib/modules/Parser.pmod/Pike.pmod: Parse binary numbers.
+ * lib/modules/Standards.pmod/EXIF.pmod: Better EXIF support. Some
+ API changes: get_properties only accepts Stdio.File objects.
+ MN_Multi1 is renamed to MN_Multi3.
+ * src/: builtin.cmod, builtin_functions.c: It's better to throw
+ errors than return zero if ctime(), localtime() or gmtime() fails.
+ * src/builtin.cmod: Fixed missing checks for NULL from gmtime(2),
+ localtime(2) and ctime(2) which could cause segfaults. E.g. on NT
+ they don't handle negative time stamps.
+ * src/modules/: HTTPLoop/log.c, Oracle/oracle.c, spider/discdate.c:
+ Fixed missing checks for NULL from gmtime(2), localtime(2) and
+ ctime(2) which could cause segfaults. E.g. on NT they don't handle
+ negative time stamps.
+ * src/builtin_functions.c: Fixed missing checks for NULL from
+ gmtime(2) and localtime(2) which could cause segfaults. E.g. on NT
+ they don't handle negative time stamps.
+ * lib/modules/Remote.pmod/connection.pike: Fixed races that could
+ cause synchronous calls to hang in threaded mode. It's still
+ unclear whether a connection close is handled cleanly, though.
+ Better handling of exceptions from close callbacks.
+
+ -- Marek Habersack <grendel@debian.org> Fri, 18 Oct 2002 22:49:02 +0200
+
+pike7.3 (7.3.56-2) unstable; urgency=low
+
+ * Latest CVS snapshot.
+
+ -- Marek Habersack <grendel@debian.org> Fri, 18 Oct 2002 01:37:36 +0200
+
+pike7.3 (7.3.56-1) unstable; urgency=low
+
+ * Latest upstream version. The most important changes:
+ * src/: docode.c, interpret_functions.h: Replaced the F_THROW_ZERO
+ opcode used at normal exit from catch blocks with F_EXIT_CATCH,
+ which uses the newer escape catch feature. This avoids a longjmp at
+ the normal exit of every catch block.
+ Also changed the return value for normal catch block exits to be
+ UNDEFINED and not zero.
+ * lib/modules/Parser.pmod/C.pmod: Added index possibility on
+ tokens.
+ * src/program.c: Use safe_apply_handler for calling
+ get_default_module, to get better checking of the return value and
+ to get correct handling of return values that are false.
+ This fixes a bug in the odd recursion that involves the compat
+ handler and e.g. lib/7.2/modules/__default.pmod which itself
+ contains "#pike 7.2": The second time get_default_module is called
+ it'll resolve an unfinished program with "__default" and thus get a
+ function pointer that evaluates to false.
+ * bin/pike.in, src/Makefile.in, src/builtin_functions.c,
+ src/error.c: Set a breakpoint on pike_gdb_breakpoint by default
+ when gdb is started. Made it accessible from pike with
+ "_gdb_breakpoint" to make it convenient to enter gdb at a specific
+ point in the pike code.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 25 Sep 2002 02:47:40 +0200
+
+pike7.3 (7.3.55-1) unstable; urgency=low
+
+ * Latest upstream version. The most important changes:
+ * src/modules/Gz/: configure.in, zlibmod.c: The Gz module now
+ supports old versions of zlib again. Most notably seek(), tell(),
+ eof() and setparams() are now optionally implemented in Gz._file.
+ * lib/master.pike.in: Added include_prefix.
+ * src/builtin_functions.c: More information about the use and
+ limits of mktime().
+ * src/main.c: Now calls tzset() to initialize timezone et al.
+ * lib/modules/Protocols.pmod/LDAP.pmod/client.pike: add catch to
+ prevent search from bombing out when talking to active directory
+ servers. this is not a good fix, as the cause seems to be referrer
+ data.
+ This will need to be looked at more closely, but it at least allows
+ us to talk to m$ systems.
+ * lib/modules/Protocols.pmod/LDAP.pmod/client.pike: fixed create()
+ so that connection is actually made when SSL support is not
+ present.
+ * lib/master.pike.in: Added -x option to run tools from
+ Tools.Standalone.
+
+ -- Marek Habersack <grendel@debian.org> Fri, 13 Sep 2002 15:44:33 +0200
+
+pike7.3 (7.3.53-1) unstable; urgency=low
+
+ * Latest upstream version. The most important changes:
+ * src/modules/Perl/perlmod.c: Adjustment to work better with Perl
+ 5.8.0, plus a few minor layout changes to make the code nicer to
+ read.
+ * lib/modules/Local.pmod: Added support for specifying paths using
+ the PIKE_LOCAL_PATH environment variable.
+ * src/language.yacc: Fixed typing for intranges with bignum
+ intervals.
+ * lib/modules/Stdio.pmod/GZipFile.pike: Added basic support for
+ reading and writing gzip files. This is the first version and it
+ is still a bit experimental. Uses Gz._file() for lowlevel support.
+ * src/modules/Gz/zlibmod.c: Added basic support for reading and
+ writing gzip files. Lowlevel functions are located in Gz._file().
+ * src/builtin_functions.c: Fixed incorrect info about rusage() and
+ added a bit more description about some of the items.
+ * src/language.yacc: Added the "global" keyword to
+ magic_identifiers so it can be used after ->.
+ * src/pike_types.c: parse_type() now supports the syntax
+ object(this_program), and defaults to implements mode.
+ * src/modules/Postgres/: configure.in, pgres_config.h.in,
+ postgres.c: this makes the Postgres module detect/work correctly
+ with the PostgreSQL 7.2+
+
+ -- Marek Habersack <grendel@debian.org> Sun, 1 Sep 2002 00:22:22 +0200
+
+pike7.3 (7.3.51-4) unstable; urgency=low
+
+ * Enabled the Pike security.
+ * Build-conflicts with libutahglx since the latter doesn't conform
+ to the Linux OpenGL ABI
+ * Added correct build dependencies for Debian/Sid
+
+ -- Marek Habersack <grendel@debian.org> Fri, 23 Aug 2002 02:47:22 +0200
+
+pike7.3 (7.3.51-3) unstable; urgency=low
+
+ * Added the -svg package.
+ * Most packages now link to the -core doc directory.
+
+ -- Marek Habersack <grendel@debian.org> Sat, 10 Aug 2002 21:27:04 +0200
+
+pike7.3 (7.3.51-2) unstable; urgency=low
+
+ * The Debian packaging setup merged with the upstream sources under
+ the packaging/debian/ directory.
+ * Patches previously applied to the sources before generating the
+ Debian diff are now applied on the compile time.
+ * Most packages depend on pikeX.Y-core now.
+
+ -- Marek Habersack <grendel@debian.org> Tue, 6 Aug 2002 00:36:53 +0200
+
+pike7.3 (7.3.51-1) unstable; urgency=low
+
+ * Latest CVS snapshot
+ * the -crypto and -gz packages are merged with the core Pike package.
+ * the -doc package is split into -manual and -reference and
+ * The pike7.3 package became a meta package that installs a subset
+ of all the Pike packages present in Debian. This subset makes up a
+ recommended Pike environment for most systems.
+
+ -- Marek Habersack <grendel@debian.org> Wed, 31 Jul 2002 23:35:18 +0200
+
+pike7.3 (7.3.49-2) unstable; urgency=low
+
+ * Latest CVS snapshot
+
+ -- Marek Habersack <grendel@debian.org> Mon, 29 Jul 2002 10:23:44 +0200
+
+pike7.3 (7.3.49-1) unstable; urgency=low
+
+ * Latest CVS snapshot
+
+ -- Marek Habersack <grendel@debian.org> Mon, 15 Jul 2002 23:21:33 +0200
+
+pike7.3 (7.3.47-1) unstable; urgency=low
+
+ * Latest CVS snapshot
+
+ -- Marek Habersack <grendel@debian.org> Wed, 12 Jun 2002 18:13:12 +0200
+
+pike7.3 (7.3.45-1) unstable; urgency=low
+
+ * Latest CVS snapshot
+
+ -- Marek Habersack <grendel@debian.org> Fri, 17 May 2002 16:41:09 +0200
+
+pike7.3 (7.3.41-1) unstable; urgency=low
+
+ * Initial Release.
+
+ -- Marek Habersack <grendel@debian.org> Sun, 5 May 2002 01:34:05 +0200
+
Index: 7.6/debian/control
===================================================================
--- 7.6/debian/control (nonexistent)
+++ 7.6/debian/control (revision 23)
@@ -0,0 +1,237 @@
+Source: pike7.6
+Section: interpreters
+Priority: optional
+Maintainer: Magnus Holmgren <holmgren@debian.org>
+Uploaders: Henrik Andreasson <pike@han.pp.se>
+Standards-Version: 3.7.3
+Build-Depends: debhelper (>> 4.0.0), dpatch, bison, sharutils, bc,
+ libgmp3-dev, libnettle-dev (>= 1.14),
+ zlib1g-dev | libz-dev, libbz2-dev, libreadline5-dev,
+ libgdbm-dev, libiodbc2-dev, libmysqlclient15-dev, libpq-dev,
+ libperl-dev, libpcre3-dev, libxml2-dev,
+ libsdl-mixer1.2-dev, libsdl1.2-dev, libsane-dev,
+ x11proto-gl-dev, libxpm-dev, libglade2-dev, libfreetype6-dev,
+ freeglut3-dev, libjpeg-dev, libtiff4-dev, librsvg2-dev (>= 2.7), libpng12-dev
+Build-Conflicts: libutahglx-dev
+Homepage: http://pike.ida.liu.se/
+Vcs-Svn: svn://svn.kibibyte.se/pike/trunk
+Vcs-Browser: http://svn.kibibyte.se/pike
+
+Package: pike7.6-core
+Architecture: any
+Depends: ${shlibs:Depends}
+Suggests: pike7.6-doc
+Recommends: pike7.6-image (= ${binary:Version})
+Description: Powerful interpreted programming language
+ Pike is an interpreted, object-oriented, dynamic programming language
+ with a syntax similar to C. It includes many powerful data types and
+ a module system that, for instance, provides image manipulation together,
+ with support for graphics formats like SVG, JPG, PNG, GIF, XCF and many
+ others, database connectivity, advanced cryptography, XML/HTML parsers
+ and others. To learn more about pike, please visit http://pike.ida.liu.se/
+ Note that some of the Pike features are found in other pike7.6-* packages
+ (image processing, MySQL, PostgreSQL, sane and more).
+
+Package: pike7.6
+Architecture: all
+Depends: pike7.6-core (>= ${source:Version}), pike7.6-image (>= ${source:Version}), pike7.6-gdbm (>= ${source:Version})
+Recommends: pike7.6-doc (>= ${source:Version})
+Suggests: pike7.6-mysql (>= ${source:Version}), pike7.6-pg (>= ${source:Version}), pike7.6-dev (>= ${source:Version})
+Description: Recommended meta package for Pike 7.6
+ This is a meta package which depends upon several other Pike
+ packages that together make up the recommended Pike installation.
+ If you want to install every packaged component of the Pike
+ distribution, please install the pike7.6-meta package.
+ .
+ If you want to remove several components this package depends
+ upon, you can purge this package without worrying about the
+ functionality loss in Pike and then remove the packages you
+ don't need on your system.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-dev
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (>= ${source:Version})
+Description: Development files for Pike 7.6
+ This package contains files you will need to develop C extension
+ modules for Pike. The package depends on the recommended set of
+ packages for the Pike environment.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-manual
+Architecture: all
+Section: doc
+Description: Pike 7.6 manual
+ The Pike manual auto-generated from the sources.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-reference
+Architecture: all
+Section: doc
+Description: Pike 7.6 reference
+ The Pike reference auto-generated from the sources.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-doc
+Architecture: all
+Section: doc
+Depends: pike7.6-manual (>= ${source:Version}), pike7.6-reference (>= ${source:Version})
+Description: Pike 7.6 documentation meta package
+ This package depends upon all the Pike 7.6 documentation
+ packages. Note that the download and installation sizes might be very
+ large.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-meta
+Architecture: all
+Depends: pike7.6 (>= ${source:Version}), pike7.6-mysql (>= ${source:Version}), pike7.6-pg (>= ${source:Version}), pike7.6-odbc (>= ${source:Version}), pike7.6-image (>= ${source:Version}), pike7.6-sdl (>= ${source:Version}), pike7.6-gdbm (>= ${source:Version}), pike7.6-gl (>= ${source:Version}), pike7.6-sane (>= ${source:Version}), pike7.6-doc (>= ${source:Version}), pike7.6-dev (>= ${source:Version}), pike7.6-perl (>= ${source:Version}), pike7.6-svg (>= ${source:Version}), pike7.6-pcre (>= ${source:Version}), pike7.6-bzip2 (>= ${source:Version})
+Description: Meta package for Pike 7.6
+ This package depends on all the components that make up the Pike
+ language distribution. It will pull in a LOT of packages the
+ Pike components depend upon (including XFree libraries, GTK+, GNOME)!
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-mysql
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Description: MySQL module for Pike
+ This Pike module provides access to MySQL databases.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-pg
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Description: PostgreSQL module for Pike
+ This Pike module provides access to PostgreSQL databases.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-odbc
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Description: Odbc module for Pike
+ This Pike module provides glue to the iOdbc interface.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-svg
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Suggests: pike7.6-image (= ${binary:Version})
+Description: SVG format support for Pike
+ This module provides an SVG graphics format module. It has
+ been separated from the pike7.6-image module because of its
+ quite extensive dependencies.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-image
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Suggests: pike7.6-svg (= ${binary:Version})
+Description: Image module for Pike
+ This module provides many powerful image processing functions to
+ Pike programs.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-sdl
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Description: SDL module for Pike
+ This module provides the Pike interface to the SDL library.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-gdbm
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Description: Gdbm module for Pike
+ This Pike module provides access to gdbm databases.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-gl
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Description: Mesa module for Pike
+ This Pike module provides access to the Mesa 3D graphics library.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-sane
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Description: SANE module for Pike
+ This Pike module provides access to SANE.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-perl
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Description: Perl module for Pike
+ This Pike module enables one to embed perl in pike programs.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-pcre
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Description: PCRE module for Pike
+ This Pike module enables one to use the PCRE (Perl regular
+ expressions) from within Pike programs.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+
+Package: pike7.6-bzip2
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Description: Bzip2 module for Pike
+ This Pike module enables one to use the Bzip2 compression
+ algorithm from within Pike programs.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
Index: 7.6/debian/menu
===================================================================
--- 7.6/debian/menu (nonexistent)
+++ 7.6/debian/menu (revision 23)
@@ -0,0 +1,4 @@
+?package(pike7.6-core):needs="text" section="Applications/Programming"\
+ title="Pike 7.6 HILFE" \
+ command="/usr/bin/pike7.6" \
+ icon="/usr/share/pixmaps/pike7.6.xpm"
Index: 7.6/debian/rules
===================================================================
--- 7.6/debian/rules (nonexistent)
+++ 7.6/debian/rules (revision 23)
@@ -0,0 +1,255 @@
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper.
+# GNU copyright 1997 by Joey Hess.
+#
+# This version is for a hypothetical package that builds an
+# architecture-dependant package, as well as an architecture-independent
+# package.
+#
+# $Id: rules,v 1.64 2006/08/05 15:49:18 grendel Exp $
+#
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+include /usr/share/dpatch/dpatch.make
+
+ifdef CCVER
+CC=gcc-$(CCVER)
+else
+CC=gcc
+endif
+
+ifeq (,$(DEB_BUILD_ARCH))
+DEB_BUILD_ARCH=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
+endif
+
+CFLAGS_EXTRA = -g
+CPPFLAGS_EXTRA = -DDEBIAN
+
+ifdef SSP
+SSP_FLAGS=-fstack-protector
+endif
+
+CFARGSEXTRA = --with-cdebug
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+CFARGSEXTRA += --without-copt
+else
+CFARGSEXTRA += --with-copt
+endif
+
+ifneq (,$(findstring debug,$(DEB_BUILD_OPTIONS)))
+CFARGSEXTRA += --with-rtldebug
+else
+CFARGSEXTRA += --without-rtldebug
+endif
+
+CFLAGS_EXTRA += $(SSP_FLAGS)
+# Temporary workaround for hppa linker issues
+ifeq ($(DEB_BUILD_ARCH),hppa)
+CFLAGS_EXTRA += -ffunction-sections
+endif
+
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+ INSTALL_PROGRAM += -s
+endif
+
+EXTRA_ARGS=--with-security
+
+DO_MACHINE_CODE=no
+ifeq ($(DEB_BUILD_ARCH),i386)
+DO_MACHINE_CODE=yes
+endif
+ifeq ($(DEB_BUILD_ARCH),powerpc)
+DO_MACHINE_CODE=yes
+endif
+ifeq ($(DEB_BUILD_ARCH),sparc)
+DO_MACHINE_CODE=no
+endif
+
+ifeq ($(DO_MACHINE_CODE),yes)
+MACHINE_OPTS=--with-machine-code
+else
+MACHINE_OPTS=--without-machine-code
+endif
+
+DEBVERSION:=$(shell dpkg-parsechangelog | sed -ne 's/Version: *\(.*\)-.*$$/\1/p')
+MAJOR:=$(shell sed -ne 's/major://p' buildid.txt)
+MINOR:=$(shell sed -ne 's/minor://p' buildid.txt)
+BUILD:=$(shell sed -ne 's/build://p' buildid.txt)
+PIKEV:=$(MAJOR).$(MINOR)
+VERSION:=$(MAJOR).$(MINOR).$(BUILD)
+PIKE:=pike$(PIKEV)
+
+ifneq ($(VERSION),$(DEBVERSION))
+$(error Version mismatch; buildid.txt: $(VERSION), debian/changelog: $(DEBVERSION))
+endif
+
+CFARGS=$(CFARGSEXTRA) \
+ --with-cflags=\\'$(CFLAGS_EXTRA)\\' \
+ --with-cppflags=\\'$(CPPFLAGS_EXTRA)\\' \
+ --with-bignums \
+ --with-gmp \
+ --with-poll \
+ --with-zlib \
+ --with-freetype \
+ --without-ttflib \
+ --with-libnettle \
+ --without-sybase \
+ --without-java \
+ --with-odbc \
+ --with-sane \
+ --with-postgres \
+ --with-postgres-include-dir=`pg_config --includedir` \
+ --with-libpq-dir=/usr/lib \
+ --with-perl \
+ --without-ffmpeg \
+ --without-fftw \
+ --without-libpdf \
+ --without-libpanda \
+ --without-GTK \
+ --without-GTK2 \
+ --without-bundles \
+ $(MACHINE_OPTS) $(EXTRA_ARGS)
+
+include_prefix=/usr/include/pike/$(VERSION)
+lib_prefix=/usr/lib/pike/$(VERSION)
+
+MODULE_PACKAGES=$(shell dh_listpackages -a -N $(PIKE)-core -N $(PIKE)-dev)
+#{ADT,Array,Audio,Cache,Calendar,Calendar_I,COM,Colors,CommonLog,Crypto,Debug,Filesystem,Error,Float,Function,Geography,Getopt,Gettext,Gmp,Graphics,Gz,HTTPAccept,Int,Kerberos,Languages,Local,Locale,Mapping,Math,MIME,Mird,Multiset,Nettle,Parser,Pike,Pipe,Process,Program,Protocols,Regexp,Remote,SSL,Shuffler,Standards,Stdio,String,System,Thread,Tools,Unicode,Web,Yabu,Yp,_ADT,_Charset,_Roxen,___Gz,___MIME,___Math,___Mird,___Regexp,___Yp,____Charset,__builtin*,spider}.
+#usr/lib/pike/*/modules/Sql.pmod/{module,Sql,rsql,sql_*}.*
+
+excluded_modules:=Ssleay Mird Msql msql PDF Ffmpeg Oracle oracle sybase Gnome GTK GDK DVB Java TTF
+# This is tricky. Note that it's only possible for an exclusion to match the last
+# component specified in an .install file or on the command line, and below.
+DH_EXCLUDE:=$(addprefix -X,$(excluded_modules))
+DH_ALREADY=`for p in $(MODULE_PACKAGES); do \
+ find debian/$$p/usr/lib/pike/*/* -type f -printf "-X%P "; done`
+
+TMP=$(CURDIR)/debian/tmp
+
+#export CFLAGS CC PIKE VERSION
+export CC
+
+build-arch: build-arch-stamp
+build-arch-stamp: $(DPATCH_STAMPFN)
+ dh_testdir
+
+ # Add here command to compile/build the package.
+ $(MAKE) compile CONFIGUREARGS="$(CFARGS)"
+ touch build-arch-stamp
+
+build-indep: build-indep-stamp
+build-indep-stamp: $(DPATCH_STAMPFN)
+ dh_testdir
+
+ # Add here command to compile/build the arch indep package.
+ $(MAKE) documentation CONFIGUREARGS="$(CFARGS)"
+ touch build-indep-stamp
+
+build: build-arch
+
+clean: clean-patched unpatch
+ dh_clean
+
+clean-patched:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp build-arch-stamp build-indep-stamp configure-stamp
+
+ # Add here commands to clean up after the build process.
+ $(MAKE) distclean
+ rm -rf refdoc/modref refdoc/traditional_manual
+
+install: DH_OPTIONS=
+install: build-arch
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+
+ $(MAKE) INSTALLARGS=--traditional \
+ buildroot=$(TMP) \
+ prefix=/usr \
+ man_prefix=/usr/share/man \
+ lib_prefix="$(lib_prefix)" \
+ include_prefix="$(include_prefix)" \
+ pike_name=/usr/bin/$(PIKE) \
+ install_nodoc
+
+# Some cleaning
+ find "$(TMP)$(lib_prefix)" -name '.autodoc' -type f -exec rm -f '{}' ';'
+
+ install -d -m755 $(TMP)/usr/share/pixmaps
+ install -m644 debian/pike.xpm $(TMP)/usr/share/pixmaps/$(PIKE).xpm
+ mv $(TMP)/usr/bin/pike $(TMP)/usr/bin/$(PIKE)
+ mv $(TMP)/usr/share/man/man1/pike.1 $(TMP)/usr/share/man/man1/$(PIKE).1
+
+# Fix permissions and shebang lines
+ -for f in `find $(TMP)/usr/bin $(TMP)/usr/lib -type f`; do \
+ if file $$f | grep -q "script"; then \
+ chmod a+x $$f; \
+ sed -ri -e 's@#!.*NOMODULE@#!/usr/bin/$(PIKE)@' \
+ -e 's@#! */usr/local/bin/pike@#!/usr/bin/$(PIKE)@' \
+ -e 's@#! */usr/bin/env.*pike@#!/usr/bin/$(PIKE)@' \
+ $$f; \
+ fi; \
+ done
+
+# Don't install our own specs file - the ordinary one is not that bad really
+# sed -e 's/@PIKEVERSION@/$(VERSION)/g' \
+ -e 's;@CONFIGURE_ARGS@;$(CFARGS);g' \
+ debian/specs.in > $(TMP)$(include_prefix)/specs
+
+# Install pike-config
+ sed -e "s#@CFLAGS@#-I$(include_prefix)#;s/@LDFLAGS@//" \
+ -e "s/@MAJOR@/$(MAJOR)/;s/@MINOR@/$(MINOR)/;s/@BUILD@/$(BUILD)/" \
+ debian/pike-config.in > $(TMP)/usr/bin/$(PIKE)-config
+
+# # pike -x module fix
+ sed -i -e 's;\$$(MODULE_BASE)/dynamic_module_makefile;\$$(PIKE_SRC_DIR)/dynamic_module_makefile;g' \
+ $(TMP)$(include_prefix)/dynamic_module_makefile
+
+# Build architecture-independent files here.
+# Pass -i to all debhelper commands in this target to reduce clutter.
+binary-indep: build-indep
+ dh_testdir -i
+ dh_testroot -i
+ # install the docs
+ dh_install -p$(PIKE)-manual refdoc/traditional_manual/* usr/share/doc/$(PIKE)-doc/html/manual
+ dh_install -p$(PIKE)-reference refdoc/modref/* usr/share/doc/$(PIKE)-doc/html/reference
+ dh_install -i -N$(PIKE)-manual -N$(PIKE)-reference --sourcedir=$(TMP)
+ dh_installdocs -i
+ dh_installchangelogs -i -k CHANGES
+ dh_link -i
+ dh_compress -i
+ dh_fixperms -i
+ dh_installdeb -i
+ dh_gencontrol -i
+ dh_md5sums -i
+ dh_builddeb -i
+
+# Build architecture-dependent files here.
+binary-arch: build-arch install
+ dh_testdir -a
+ dh_testroot -a
+# dh_installdebconf -a
+ dh_install -a -N$(PIKE)-core --sourcedir=debian/tmp $(DH_EXCLUDE)
+ dh_install -p$(PIKE)-core --sourcedir=debian/tmp $(DH_EXCLUDE) $(DH_ALREADY)
+ for p in $(MODULE_PACKAGES) $(PIKE)-dev; do \
+ dh_link -p$$p usr/share/doc/$(PIKE)-core usr/share/doc/$$p; \
+ done
+ dh_installdocs -a
+ dh_installmenu -a
+# dh_installman -a
+ dh_installchangelogs -a -k CHANGES
+ dh_strip -a
+ dh_compress -a
+ dh_fixperms -a -X/run_autoconfig -X/precompile.sh -X/smartlink -X/fixdepends.sh -X/install_module -X/mktestsuite
+ dh_installdeb -a
+ dh_shlibdeps -a
+ dh_gencontrol -a
+ dh_md5sums -a
+ dh_builddeb -a
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
/7.6/debian/rules
Property changes:
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: 7.6/debian/pike7.6-reference.doc-base
===================================================================
--- 7.6/debian/pike7.6-reference.doc-base (nonexistent)
+++ 7.6/debian/pike7.6-reference.doc-base (revision 23)
@@ -0,0 +1,10 @@
+Document: pike7.6-refdoc
+Title: Pike 7.6 Reference
+Author: The Pike Authors
+Abstract: This document contains the full reference of all
+ the Pike modules and functions.
+Section: Programming
+
+Format: HTML
+Index: /usr/share/doc/pike7.6-doc/html/reference/index.html
+Files: /usr/share/doc/pike7.6-doc/html/reference/*.html
Index: 7.6/debian/copyright
===================================================================
--- 7.6/debian/copyright (nonexistent)
+++ 7.6/debian/copyright (revision 23)
@@ -0,0 +1,495 @@
+This package was debianized by Marek Habersack <grendel@debian.org> on
+Sun, 5 May 2002 01:34:05 +0200.
+
+The current maintainer is Magnus Holmgren <holmgren@debian.org> with
+some help from Henrik Andreasson <pike@han.pp.se>.
+
+It was downloaded from http://pike.ida.liu.se/download/pub/pike/
+
+Copyright © 1994-1996 Fredrik Hübinette
+Copyright © 1996-1997 Informationsvävarna AB
+Copyright © 1997-2000 Idonex AB
+Copyright © 2000-2002 Roxen Internet Software AB
+Copyright © 2002 Department of Computer and Information Science,
+ Linköping University
+
+The Pike source is distributed under GPL (GNU General Public License 2), LGPL
+(GNU Lesser General Public License 2.1) and MPL (Mozilla Public License 1.1).
+
+On Debian GNU/Linux systems, the complete text of the GNU General
+Public License can be found in `/usr/share/common-licenses/GPL'.
+
+On Debian GNU/Linux systems, the complete text of the GNU Lesser General
+Public License can be found in `/usr/share/common-licenses/LGPL'.
+
+The full text of the Mozilla Public License 1.1 follows.
+
+ MOZILLA PUBLIC LICENSE
+ Version 1.1
+
+ ---------------
+
+1. Definitions.
+
+ 1.0.1. "Commercial Use" means distribution or otherwise making the
+ Covered Code available to a third party.
+
+ 1.1. "Contributor" means each entity that creates or contributes to
+ the creation of Modifications.
+
+ 1.2. "Contributor Version" means the combination of the Original
+ Code, prior Modifications used by a Contributor, and the Modifications
+ made by that particular Contributor.
+
+ 1.3. "Covered Code" means the Original Code or Modifications or the
+ combination of the Original Code and Modifications, in each case
+ including portions thereof.
+
+ 1.4. "Electronic Distribution Mechanism" means a mechanism generally
+ accepted in the software development community for the electronic
+ transfer of data.
+
+ 1.5. "Executable" means Covered Code in any form other than Source
+ Code.
+
+ 1.6. "Initial Developer" means the individual or entity identified
+ as the Initial Developer in the Source Code notice required by Exhibit
+ A.
+
+ 1.7. "Larger Work" means a work which combines Covered Code or
+ portions thereof with code not governed by the terms of this License.
+
+ 1.8. "License" means this document.
+
+ 1.8.1. "Licensable" means having the right to grant, to the maximum
+ extent possible, whether at the time of the initial grant or
+ subsequently acquired, any and all of the rights conveyed herein.
+
+ 1.9. "Modifications" means any addition to or deletion from the
+ substance or structure of either the Original Code or any previous
+ Modifications. When Covered Code is released as a series of files, a
+ Modification is:
+ A. Any addition to or deletion from the contents of a file
+ containing Original Code or previous Modifications.
+
+ B. Any new file that contains any part of the Original Code or
+ previous Modifications.
+
+ 1.10. "Original Code" means Source Code of computer software code
+ which is described in the Source Code notice required by Exhibit A as
+ Original Code, and which, at the time of its release under this
+ License is not already Covered Code governed by this License.
+
+ 1.10.1. "Patent Claims" means any patent claim(s), now owned or
+ hereafter acquired, including without limitation, method, process,
+ and apparatus claims, in any patent Licensable by grantor.
+
+ 1.11. "Source Code" means the preferred form of the Covered Code for
+ making modifications to it, including all modules it contains, plus
+ any associated interface definition files, scripts used to control
+ compilation and installation of an Executable, or source code
+ differential comparisons against either the Original Code or another
+ well known, available Covered Code of the Contributor's choice. The
+ Source Code can be in a compressed or archival form, provided the
+ appropriate decompression or de-archiving software is widely available
+ for no charge.
+
+ 1.12. "You" (or "Your") means an individual or a legal entity
+ exercising rights under, and complying with all of the terms of, this
+ License or a future version of this License issued under Section 6.1.
+ For legal entities, "You" includes any entity which controls, is
+ controlled by, or is under common control with You. For purposes of
+ this definition, "control" means (a) the power, direct or indirect,
+ to cause the direction or management of such entity, whether by
+ contract or otherwise, or (b) ownership of more than fifty percent
+ (50%) of the outstanding shares or beneficial ownership of such
+ entity.
+
+2. Source Code License.
+
+ 2.1. The Initial Developer Grant.
+ The Initial Developer hereby grants You a world-wide, royalty-free,
+ non-exclusive license, subject to third party intellectual property
+ claims:
+ (a) under intellectual property rights (other than patent or
+ trademark) Licensable by Initial Developer to use, reproduce,
+ modify, display, perform, sublicense and distribute the Original
+ Code (or portions thereof) with or without Modifications, and/or
+ as part of a Larger Work; and
+
+ (b) under Patents Claims infringed by the making, using or
+ selling of Original Code, to make, have made, use, practice,
+ sell, and offer for sale, and/or otherwise dispose of the
+ Original Code (or portions thereof).
+
+ (c) the licenses granted in this Section 2.1(a) and (b) are
+ effective on the date Initial Developer first distributes
+ Original Code under the terms of this License.
+
+ (d) Notwithstanding Section 2.1(b) above, no patent license is
+ granted: 1) for code that You delete from the Original Code; 2)
+ separate from the Original Code; or 3) for infringements caused
+ by: i) the modification of the Original Code or ii) the
+ combination of the Original Code with other software or devices.
+
+ 2.2. Contributor Grant.
+ Subject to third party intellectual property claims, each Contributor
+ hereby grants You a world-wide, royalty-free, non-exclusive license
+
+ (a) under intellectual property rights (other than patent or
+ trademark) Licensable by Contributor, to use, reproduce, modify,
+ display, perform, sublicense and distribute the Modifications
+ created by such Contributor (or portions thereof) either on an
+ unmodified basis, with other Modifications, as Covered Code
+ and/or as part of a Larger Work; and
+
+ (b) under Patent Claims infringed by the making, using, or
+ selling of Modifications made by that Contributor either alone
+ and/or in combination with its Contributor Version (or portions
+ of such combination), to make, use, sell, offer for sale, have
+ made, and/or otherwise dispose of: 1) Modifications made by that
+ Contributor (or portions thereof); and 2) the combination of
+ Modifications made by that Contributor with its Contributor
+ Version (or portions of such combination).
+
+ (c) the licenses granted in Sections 2.2(a) and 2.2(b) are
+ effective on the date Contributor first makes Commercial Use of
+ the Covered Code.
+
+ (d) Notwithstanding Section 2.2(b) above, no patent license is
+ granted: 1) for any code that Contributor has deleted from the
+ Contributor Version; 2) separate from the Contributor Version;
+ 3) for infringements caused by: i) third party modifications of
+ Contributor Version or ii) the combination of Modifications made
+ by that Contributor with other software (except as part of the
+ Contributor Version) or other devices; or 4) under Patent Claims
+ infringed by Covered Code in the absence of Modifications made by
+ that Contributor.
+
+3. Distribution Obligations.
+
+ 3.1. Application of License.
+ The Modifications which You create or to which You contribute are
+ governed by the terms of this License, including without limitation
+ Section 2.2. The Source Code version of Covered Code may be
+ distributed only under the terms of this License or a future version
+ of this License released under Section 6.1, and You must include a
+ copy of this License with every copy of the Source Code You
+ distribute. You may not offer or impose any terms on any Source Code
+ version that alters or restricts the applicable version of this
+ License or the recipients' rights hereunder. However, You may include
+ an additional document offering the additional rights described in
+ Section 3.5.
+
+ 3.2. Availability of Source Code.
+ Any Modification which You create or to which You contribute must be
+ made available in Source Code form under the terms of this License
+ either on the same media as an Executable version or via an accepted
+ Electronic Distribution Mechanism to anyone to whom you made an
+ Executable version available; and if made available via Electronic
+ Distribution Mechanism, must remain available for at least twelve (12)
+ months after the date it initially became available, or at least six
+ (6) months after a subsequent version of that particular Modification
+ has been made available to such recipients. You are responsible for
+ ensuring that the Source Code version remains available even if the
+ Electronic Distribution Mechanism is maintained by a third party.
+
+ 3.3. Description of Modifications.
+ You must cause all Covered Code to which You contribute to contain a
+ file documenting the changes You made to create that Covered Code and
+ the date of any change. You must include a prominent statement that
+ the Modification is derived, directly or indirectly, from Original
+ Code provided by the Initial Developer and including the name of the
+ Initial Developer in (a) the Source Code, and (b) in any notice in an
+ Executable version or related documentation in which You describe the
+ origin or ownership of the Covered Code.
+
+ 3.4. Intellectual Property Matters
+ (a) Third Party Claims.
+ If Contributor has knowledge that a license under a third party's
+ intellectual property rights is required to exercise the rights
+ granted by such Contributor under Sections 2.1 or 2.2,
+ Contributor must include a text file with the Source Code
+ distribution titled "LEGAL" which describes the claim and the
+ party making the claim in sufficient detail that a recipient will
+ know whom to contact. If Contributor obtains such knowledge after
+ the Modification is made available as described in Section 3.2,
+ Contributor shall promptly modify the LEGAL file in all copies
+ Contributor makes available thereafter and shall take other steps
+ (such as notifying appropriate mailing lists or newsgroups)
+ reasonably calculated to inform those who received the Covered
+ Code that new knowledge has been obtained.
+
+ (b) Contributor APIs.
+ If Contributor's Modifications include an application programming
+ interface and Contributor has knowledge of patent licenses which
+ are reasonably necessary to implement that API, Contributor must
+ also include this information in the LEGAL file.
+
+ (c) Representations.
+ Contributor represents that, except as disclosed pursuant to
+ Section 3.4(a) above, Contributor believes that Contributor's
+ Modifications are Contributor's original creation(s) and/or
+ Contributor has sufficient rights to grant the rights conveyed by
+ this License.
+
+ 3.5. Required Notices.
+ You must duplicate the notice in Exhibit A in each file of the Source
+ Code. If it is not possible to put such notice in a particular Source
+ Code file due to its structure, then You must include such notice in a
+ location (such as a relevant directory) where a user would be likely
+ to look for such a notice. If You created one or more Modification(s)
+ You may add your name as a Contributor to the notice described in
+ Exhibit A. You must also duplicate this License in any documentation
+ for the Source Code where You describe recipients' rights or ownership
+ rights relating to Covered Code. You may choose to offer, and to
+ charge a fee for, warranty, support, indemnity or liability
+ obligations to one or more recipients of Covered Code. However, You
+ may do so only on Your own behalf, and not on behalf of the Initial
+ Developer or any Contributor. You must make it absolutely clear than
+ any such warranty, support, indemnity or liability obligation is
+ offered by You alone, and You hereby agree to indemnify the Initial
+ Developer and every Contributor for any liability incurred by the
+ Initial Developer or such Contributor as a result of warranty,
+ support, indemnity or liability terms You offer.
+
+ 3.6. Distribution of Executable Versions.
+ You may distribute Covered Code in Executable form only if the
+ requirements of Section 3.1-3.5 have been met for that Covered Code,
+ and if You include a notice stating that the Source Code version of
+ the Covered Code is available under the terms of this License,
+ including a description of how and where You have fulfilled the
+ obligations of Section 3.2. The notice must be conspicuously included
+ in any notice in an Executable version, related documentation or
+ collateral in which You describe recipients' rights relating to the
+ Covered Code. You may distribute the Executable version of Covered
+ Code or ownership rights under a license of Your choice, which may
+ contain terms different from this License, provided that You are in
+ compliance with the terms of this License and that the license for the
+ Executable version does not attempt to limit or alter the recipient's
+ rights in the Source Code version from the rights set forth in this
+ License. If You distribute the Executable version under a different
+ license You must make it absolutely clear that any terms which differ
+ from this License are offered by You alone, not by the Initial
+ Developer or any Contributor. You hereby agree to indemnify the
+ Initial Developer and every Contributor for any liability incurred by
+ the Initial Developer or such Contributor as a result of any such
+ terms You offer.
+
+ 3.7. Larger Works.
+ You may create a Larger Work by combining Covered Code with other code
+ not governed by the terms of this License and distribute the Larger
+ Work as a single product. In such a case, You must make sure the
+ requirements of this License are fulfilled for the Covered Code.
+
+4. Inability to Comply Due to Statute or Regulation.
+
+ If it is impossible for You to comply with any of the terms of this
+ License with respect to some or all of the Covered Code due to
+ statute, judicial order, or regulation then You must: (a) comply with
+ the terms of this License to the maximum extent possible; and (b)
+ describe the limitations and the code they affect. Such description
+ must be included in the LEGAL file described in Section 3.4 and must
+ be included with all distributions of the Source Code. Except to the
+ extent prohibited by statute or regulation, such description must be
+ sufficiently detailed for a recipient of ordinary skill to be able to
+ understand it.
+
+5. Application of this License.
+
+ This License applies to code to which the Initial Developer has
+ attached the notice in Exhibit A and to related Covered Code.
+
+6. Versions of the License.
+
+ 6.1. New Versions.
+ Netscape Communications Corporation ("Netscape") may publish revised
+ and/or new versions of the License from time to time. Each version
+ will be given a distinguishing version number.
+
+ 6.2. Effect of New Versions.
+ Once Covered Code has been published under a particular version of the
+ License, You may always continue to use it under the terms of that
+ version. You may also choose to use such Covered Code under the terms
+ of any subsequent version of the License published by Netscape. No one
+ other than Netscape has the right to modify the terms applicable to
+ Covered Code created under this License.
+
+ 6.3. Derivative Works.
+ If You create or use a modified version of this License (which you may
+ only do in order to apply it to code which is not already Covered Code
+ governed by this License), You must (a) rename Your license so that
+ the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape",
+ "MPL", "NPL" or any confusingly similar phrase do not appear in your
+ license (except to note that your license differs from this License)
+ and (b) otherwise make it clear that Your version of the license
+ contains terms which differ from the Mozilla Public License and
+ Netscape Public License. (Filling in the name of the Initial
+ Developer, Original Code or Contributor in the notice described in
+ Exhibit A shall not of themselves be deemed to be modifications of
+ this License.)
+
+7. DISCLAIMER OF WARRANTY.
+
+ COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
+ WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF
+ DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING.
+ THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE
+ IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT,
+ YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE
+ COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER
+ OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF
+ ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
+
+8. TERMINATION.
+
+ 8.1. This License and the rights granted hereunder will terminate
+ automatically if You fail to comply with terms herein and fail to cure
+ such breach within 30 days of becoming aware of the breach. All
+ sublicenses to the Covered Code which are properly granted shall
+ survive any termination of this License. Provisions which, by their
+ nature, must remain in effect beyond the termination of this License
+ shall survive.
+
+ 8.2. If You initiate litigation by asserting a patent infringement
+ claim (excluding declatory judgment actions) against Initial Developer
+ or a Contributor (the Initial Developer or Contributor against whom
+ You file such action is referred to as "Participant") alleging that:
+
+ (a) such Participant's Contributor Version directly or indirectly
+ infringes any patent, then any and all rights granted by such
+ Participant to You under Sections 2.1 and/or 2.2 of this License
+ shall, upon 60 days notice from Participant terminate prospectively,
+ unless if within 60 days after receipt of notice You either: (i)
+ agree in writing to pay Participant a mutually agreeable reasonable
+ royalty for Your past and future use of Modifications made by such
+ Participant, or (ii) withdraw Your litigation claim with respect to
+ the Contributor Version against such Participant. If within 60 days
+ of notice, a reasonable royalty and payment arrangement are not
+ mutually agreed upon in writing by the parties or the litigation claim
+ is not withdrawn, the rights granted by Participant to You under
+ Sections 2.1 and/or 2.2 automatically terminate at the expiration of
+ the 60 day notice period specified above.
+
+ (b) any software, hardware, or device, other than such Participant's
+ Contributor Version, directly or indirectly infringes any patent, then
+ any rights granted to You by such Participant under Sections 2.1(b)
+ and 2.2(b) are revoked effective as of the date You first made, used,
+ sold, distributed, or had made, Modifications made by that
+ Participant.
+
+ 8.3. If You assert a patent infringement claim against Participant
+ alleging that such Participant's Contributor Version directly or
+ indirectly infringes any patent where such claim is resolved (such as
+ by license or settlement) prior to the initiation of patent
+ infringement litigation, then the reasonable value of the licenses
+ granted by such Participant under Sections 2.1 or 2.2 shall be taken
+ into account in determining the amount or value of any payment or
+ license.
+
+ 8.4. In the event of termination under Sections 8.1 or 8.2 above,
+ all end user license agreements (excluding distributors and resellers)
+ which have been validly granted by You or any distributor hereunder
+ prior to termination shall survive termination.
+
+9. LIMITATION OF LIABILITY.
+
+ UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT
+ (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL
+ DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,
+ OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR
+ ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
+ CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL,
+ WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
+ COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN
+ INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF
+ LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY
+ RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW
+ PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE
+ EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
+ THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
+
+10. U.S. GOVERNMENT END USERS.
+
+ The Covered Code is a "commercial item," as that term is defined in
+ 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer
+ software" and "commercial computer software documentation," as such
+ terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48
+ C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995),
+ all U.S. Government End Users acquire Covered Code with only those
+ rights set forth herein.
+
+11. MISCELLANEOUS.
+
+ This License represents the complete agreement concerning subject
+ matter hereof. If any provision of this License is held to be
+ unenforceable, such provision shall be reformed only to the extent
+ necessary to make it enforceable. This License shall be governed by
+ California law provisions (except to the extent applicable law, if
+ any, provides otherwise), excluding its conflict-of-law provisions.
+ With respect to disputes in which at least one party is a citizen of,
+ or an entity chartered or registered to do business in the United
+ States of America, any litigation relating to this License shall be
+ subject to the jurisdiction of the Federal Courts of the Northern
+ District of California, with venue lying in Santa Clara County,
+ California, with the losing party responsible for costs, including
+ without limitation, court costs and reasonable attorneys' fees and
+ expenses. The application of the United Nations Convention on
+ Contracts for the International Sale of Goods is expressly excluded.
+ Any law or regulation which provides that the language of a contract
+ shall be construed against the drafter shall not apply to this
+ License.
+
+12. RESPONSIBILITY FOR CLAIMS.
+
+ As between Initial Developer and the Contributors, each party is
+ responsible for claims and damages arising, directly or indirectly,
+ out of its utilization of rights under this License and You agree to
+ work with Initial Developer and Contributors to distribute such
+ responsibility on an equitable basis. Nothing herein is intended or
+ shall be deemed to constitute any admission of liability.
+
+13. MULTIPLE-LICENSED CODE.
+
+ Initial Developer may designate portions of the Covered Code as
+ "Multiple-Licensed". "Multiple-Licensed" means that the Initial
+ Developer permits you to utilize portions of the Covered Code under
+ Your choice of the NPL or the alternative licenses, if any, specified
+ by the Initial Developer in the file described in Exhibit A.
+
+EXHIBIT A -Mozilla Public License.
+
+ ``The contents of this file are subject to the Mozilla Public License
+ Version 1.1 (the "License"); you may not use this file except in
+ compliance with the License. You may obtain a copy of the License at
+ http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS IS"
+ basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
+ License for the specific language governing rights and limitations
+ under the License.
+
+ The Original Code is ______________________________________.
+
+ The Initial Developer of the Original Code is ________________________.
+ Portions created by ______________________ are Copyright (C) ______
+ _______________________. All Rights Reserved.
+
+ Contributor(s): ______________________________________.
+
+ Alternatively, the contents of this file may be used under the terms
+ of the _____ license (the "[___] License"), in which case the
+ provisions of [______] License are applicable instead of those
+ above. If you wish to allow use of your version of this file only
+ under the terms of the [____] License and not to allow others to use
+ your version of this file under the MPL, indicate your decision by
+ deleting the provisions above and replace them with the notice and
+ other provisions required by the [___] License. If you do not delete
+ the provisions above, a recipient may use your version of this file
+ under either the MPL or the [___] License."
+
+ [NOTE: The text of this Exhibit A may differ slightly from the text of
+ the notices in the Source Code files of the Original Code. You should
+ use the text of this Exhibit A rather than the text found in the
+ Original Code Source Code for Your Modifications.]
Index: 7.6/debian/pike7.6-manual.doc-base
===================================================================
--- 7.6/debian/pike7.6-manual.doc-base (nonexistent)
+++ 7.6/debian/pike7.6-manual.doc-base (revision 23)
@@ -0,0 +1,10 @@
+Document: pike7.6-manual
+Title: Pike 7.6 Manual
+Author: The Pike Authors
+Abstract: This manual describes the Pike 7.6 language and contains
+ a short tutorial on the language.
+Section: Programming
+
+Format: HTML
+Index: /usr/share/doc/pike7.6-doc/html/manual/index.html
+Files: /usr/share/doc/pike7.6-doc/html/manual/*.html
Index: 7.6/debian/docs
===================================================================
--- 7.6/debian/docs (nonexistent)
+++ 7.6/debian/docs (revision 23)
@@ -0,0 +1,3 @@
+README-CVS
+README
+COMMITTERS
Index: 7.6/debian/README.Debian
===================================================================
--- 7.6/debian/README.Debian (nonexistent)
+++ 7.6/debian/README.Debian (revision 23)
@@ -0,0 +1,61 @@
+Missing modules
+---------------
+
+The following modules are not included in the Debian Pike packages for
+various reasons, even if they are included in the module reference
+(pike7.6-reference):
+
+ - DVB: Doesn't work with Linux 2.6 (and certainly not with other OSes).
+ - _Ffmpeg: formerly missing from Debian due to patent issues. Might be
+ included in the next release.
+ - Gnome, GTK, GDK: Uses obsolete GTK version (1.2).
+ - Math.Transforms.FFT: Few use cases in Pike, pulls in unnecessary
+ dependencies.
+ - Mird: Old, unmaintained, largely unknown library.
+ - Msql: Obsolete, proprietary DBM.
+ - PDF: Uses unmaintained libraries unavailable in Debian.
+ - Ssleay: Obsolete.
+ - Oracle: Proprietary DBM (so far ...).
+ - Java: Links with the JVM library in a non-policy compliant
+ way. Work needed.
+ - Image.TTF: Uses obsolete library (freetype1).
+
+Places to visit
+---------------
+ - http://pike.ida.liu.se/ - the main Pike site
+ - http://community.roxen.com - community site for users of the
+ Roxen webserver and the Pike bugs database, information etc.
+ - http://caudium.net/ - website of the Caudium WebServer which is
+ written in Pike
+ - http://www.roxen.com/ - website of the Roxen IS, the company which
+ for a long time developed and maintained Pike as well as the Roxen
+ WebServer mentioned above.
+
+Notes for developers
+--------------------
+
+The postinst script created a few directories in /usr/local which you can
+use for your modules/include files. Once created by the postinst script
+they will never be touched by any pike package again. The directories
+are:
+
+/usr/local/include/pike
+/usr/local/include/pike7.6
+
+/usr/local/lib/pike/site_pike
+/usr/local/lib/pike7.6/site_pike
+
+/usr/local/share/pike/site_pike
+/usr/local/share/pike7.6/site_pike
+
+Note: I have come to the conclusion that this structure isn't awfully
+well though through. It is likely to change, but probably not until
+Pike 7.8. What's missing is a working infrastructure for building and
+installing third-pary modules and applications so that they won't have
+to be rebuilt for each new Pike revision, similarly to Perl and/or
+Python. Stay tuned.
+
+----
+$Id$
+
+ -- Magnus Holmgren <magnus@kibibyte.se>, Fri, 21 Dec 2007 09:43:18 +0100
/7.6/debian/README.Debian
Property changes:
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: 7.6/debian/watch
===================================================================
--- 7.6/debian/watch (nonexistent)
+++ 7.6/debian/watch (revision 23)
@@ -0,0 +1,3 @@
+version=3
+
+http://pike.ida.liu.se/download/pub/pike/latest-stable/ .*/Pike-v(.*)\.tar\.gz
Index: 7.6/debian/pike7.6-pcre.install
===================================================================
--- 7.6/debian/pike7.6-pcre.install (nonexistent)
+++ 7.6/debian/pike7.6-pcre.install (revision 23)
@@ -0,0 +1,2 @@
+usr/lib/pike/*/modules/*Regexp_PCRE.*
+usr/share/pike/*/modules/*Regexp_PCRE.*
Index: 7.6/debian/pike7.6-svg.install
===================================================================
--- 7.6/debian/pike7.6-svg.install (nonexistent)
+++ 7.6/debian/pike7.6-svg.install (revision 23)
@@ -0,0 +1 @@
+usr/lib/pike/*/modules/*Image_SVG.so
Index: 7.6/debian/control.disabled
===================================================================
--- 7.6/debian/control.disabled (nonexistent)
+++ 7.6/debian/control.disabled (revision 23)
@@ -0,0 +1,24 @@
+Package: pike7.6-gtk
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (=${Source-Version})
+Description: GTK module for Pike
+ This Pike module provides access to the GTK+ library.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+ .
+ http://pike.ida.liu.se/
+
+Package: pike7.6-java
+Architecture: any
+Depends: ${shlibs:Depends}, pike7.6-core (= ${binary:Version})
+Description: Java module for Pike
+ This Pike module enables one to call Java code from Pike programs.
+ .
+ Pike is an interpreted programming language, for more information
+ see the description of the pike7.6-core package or visit the URL
+ below.
+ .
+ http://pike.ida.liu.se/
+
Index: 7.6/debian/pike7.6-perl.install
===================================================================
--- 7.6/debian/pike7.6-perl.install (nonexistent)
+++ 7.6/debian/pike7.6-perl.install (revision 23)
@@ -0,0 +1,2 @@
+usr/lib/pike/*/modules/*Perl.*
+usr/share/pike/*/modules/*Perl.*
Index: 7.6/debian/pike7.6-gl.install
===================================================================
--- 7.6/debian/pike7.6-gl.install (nonexistent)
+++ 7.6/debian/pike7.6-gl.install (revision 23)
@@ -0,0 +1,2 @@
+usr/lib/pike/*/modules/*GL*
+usr/share/pike/*/modules/*GL*
Index: 7.6/debian/pike7.6-odbc.install
===================================================================
--- 7.6/debian/pike7.6-odbc.install (nonexistent)
+++ 7.6/debian/pike7.6-odbc.install (revision 23)
@@ -0,0 +1,4 @@
+usr/lib/pike/*/modules/*Odbc.*
+usr/share/pike/*/modules/*Odbc.*
+usr/lib/pike/*/modules/Sql.pmod/odbc*
+usr/share/pike/*/modules/Sql.pmod/odbc*
Index: 7.6/debian/pike7.6-gdbm.install
===================================================================
--- 7.6/debian/pike7.6-gdbm.install (nonexistent)
+++ 7.6/debian/pike7.6-gdbm.install (revision 23)
@@ -0,0 +1,2 @@
+usr/lib/pike/*/modules/*Gdbm.*
+usr/share/pike/*/modules/*Gdbm.*
Index: 7.6/debian/pike7.6-dev.dirs
===================================================================
--- 7.6/debian/pike7.6-dev.dirs (nonexistent)
+++ 7.6/debian/pike7.6-dev.dirs (revision 23)
@@ -0,0 +1,2 @@
+usr/bin/
+usr/include/pike/
Index: 7.6/debian/pike7.6-dev.install
===================================================================
--- 7.6/debian/pike7.6-dev.install (nonexistent)
+++ 7.6/debian/pike7.6-dev.install (revision 23)
@@ -0,0 +1,2 @@
+usr/include/pike/*/*
+usr/bin/pike*-config
Index: 7.6/debian/pike7.6-bzip2.install
===================================================================
--- 7.6/debian/pike7.6-bzip2.install (nonexistent)
+++ 7.6/debian/pike7.6-bzip2.install (revision 23)
@@ -0,0 +1,2 @@
+usr/lib/pike/*/modules/*Bz2.*
+usr/share/pike/*/modules/*Bz2.*
Index: 7.6/debian/pike7.6-sane.install
===================================================================
--- 7.6/debian/pike7.6-sane.install (nonexistent)
+++ 7.6/debian/pike7.6-sane.install (revision 23)
@@ -0,0 +1,2 @@
+usr/lib/pike/*/modules/*SANE.*
+usr/share/pike/*/modules/*SANE.*
Index: 7.6/debian/NEWS
===================================================================
--- 7.6/debian/NEWS (nonexistent)
+++ 7.6/debian/NEWS (revision 23)
@@ -0,0 +1,7 @@
+pike7.6 (7.6.112-1) unstable; urgency=low
+
+ * The Image.TTF module uses the deprecated freetype1 library that is
+ being phased out. It has therefore been removed. The Image.FreeType
+ module should be used instead.
+
+ -- Magnus Holmgren <magnus@kibibyte.se> Tue, 25 Sep 2007 20:21:17 +0200
Index: 7.6/debian/pike7.6-core.install
===================================================================
--- 7.6/debian/pike7.6-core.install (nonexistent)
+++ 7.6/debian/pike7.6-core.install (revision 23)
@@ -0,0 +1,8 @@
+usr/bin/pike7.6
+usr/lib/pike/*/?.?
+usr/lib/pike/*/include
+usr/lib/pike/*/modules
+usr/lib/pike/*/master.pike
+usr/lib/pike/*/master.pike.o
+usr/share/pixmaps
+usr/share/man
Index: 7.6/debian/pike7.6-mysql.install
===================================================================
--- 7.6/debian/pike7.6-mysql.install (nonexistent)
+++ 7.6/debian/pike7.6-mysql.install (revision 23)
@@ -0,0 +1,6 @@
+usr/lib/pike/*/include/mysql.h
+usr/lib/pike/*/7.4/include/mysql.h
+usr/lib/pike/*/modules/*Mysql.*
+usr/share/pike/*/modules/*Mysql.*
+usr/lib/pike/*/modules/Sql.pmod/mysql*
+usr/share/pike/*/modules/Sql.pmod/mysql*
Index: 7.6/debian/pike7.6-pg.install
===================================================================
--- 7.6/debian/pike7.6-pg.install (nonexistent)
+++ 7.6/debian/pike7.6-pg.install (revision 23)
@@ -0,0 +1,6 @@
+usr/lib/pike/*/include/postgres.h
+usr/lib/pike/*/7.4/include/postgres.h
+usr/lib/pike/*/modules/*Postgres.*
+usr/share/pike/*/modules/*Postgres.*
+usr/lib/pike/*/modules/Sql.pmod/postgres*
+usr/share/pike/*/modules/Sql.pmod/postgres*
Index: 7.6/debian/pike7.6-java.install
===================================================================
--- 7.6/debian/pike7.6-java.install (nonexistent)
+++ 7.6/debian/pike7.6-java.install (revision 23)
@@ -0,0 +1 @@
+usr/lib/pike/*/modules/*Java.*
Index: 7.6/debian/pike7.6-image.install
===================================================================
--- 7.6/debian/pike7.6-image.install (nonexistent)
+++ 7.6/debian/pike7.6-image.install (revision 23)
@@ -0,0 +1,6 @@
+usr/lib/pike/*/modules/Image.so
+usr/lib/pike/*/modules/*Image_[!S]*.so
+usr/lib/pike/*/modules/*Image*.pmod
+usr/share/pike/*/modules/*Image*.pmod*
+usr/share/pike/*/modules/_Image.pmod
+usr/lib/pike/*/modules/_Image.pmod
Index: 7.6/debian/pike7.6-sdl.install
===================================================================
--- 7.6/debian/pike7.6-sdl.install (nonexistent)
+++ 7.6/debian/pike7.6-sdl.install (revision 23)
@@ -0,0 +1,2 @@
+usr/lib/pike/*/modules/*SDL.*
+usr/share/pike/*/modules/*SDL.*
Index: 7.6/debian/pike7.6-gtk.install
===================================================================
--- 7.6/debian/pike7.6-gtk.install (nonexistent)
+++ 7.6/debian/pike7.6-gtk.install (revision 23)
@@ -0,0 +1,8 @@
+usr/lib/pike/*/modules/GDK*
+usr/lib/pike/*/modules/Gnome*
+usr/lib/pike/*/modules/GTKSupport.pmod
+usr/lib/pike/*/modules/*GTK*
+usr/share/pike/*/modules/GDK*
+usr/share/pike/*/modules/Gnome*
+usr/share/pike/*/modules/GTKSupport.pmod
+usr/share/pike/*/modules/*GTK*
Index: 7.6/debian/pike.xpm
===================================================================
--- 7.6/debian/pike.xpm (nonexistent)
+++ 7.6/debian/pike.xpm (revision 23)
@@ -0,0 +1,38 @@
+/* XPM */
+static char * pike_xpm[] = {
+"32 32 3 1",
+" c None",
+". c #000000",
+"+ c #FFFFFF",
+" .......................... ",
+" .++++++++++++++++++++++++. ",
+" .+++.....+..+..+..+.....+. ",
+" .+++.....+..+.....+.....+. ",
+" .+++..+..........+...++++. ",
+" .++........+....++.....++. ",
+" .++.....+..+....++.....++. ",
+" .++..+++........+...+++++. ",
+" .+...+++..+..+.........++. ",
+" .+..++++..+..+........+++. ",
+" .++++++++++++++++++++++++. ",
+" .+++++++++++++++++++++++.... ",
+" .+++++..++++++++...++....... ",
+" .++++.....+++++...........+. ",
+" .+++................++..++.. ",
+" .+++.....+.........++..++.. ",
+" .++++........++..+++..++.. ",
+" .++++++......++++++..++... ",
+" .++++......+++++++..+++... ",
+" .+++.....++..+++++...+++.... ",
+" .++.....++..++++++++...++.+. ",
+" .+....++++.++++++++++....... ",
+" ....++..+..+++..+........... ",
+" ....+..+.......++++..++++. ",
+"......+....+...++++++++++++. ",
+".+...+.....++++++++++++++++. ",
+"...++......++++++++++++++++. ",
+" ..++.....+++++++++++++++++. ",
+" .++++++++++++++++++++++++. ",
+" .......................... ",
+" ",
+" "};
Index: 7.6/debian/pike7.6-core.postinst
===================================================================
--- 7.6/debian/pike7.6-core.postinst (nonexistent)
+++ 7.6/debian/pike7.6-core.postinst (revision 23)
@@ -0,0 +1,62 @@
+#! /bin/sh
+# postinst script for pike7.6
+#
+# see: dh_installdeb(1)
+#
+# $Id: pike7.6-core.postinst,v 1.1 2005/11/21 20:21:48 grendel Exp $
+#
+
+set -e
+
+PIKE=7.6
+PIKEBIN=pike${PIKE}
+
+# summary of how this script can be called:
+# * <postinst> `configure' <most-recently-configured-version>
+# * <old-postinst> `abort-upgrade' <new version>
+# * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+# <new-version>
+# * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+# <failed-install-package> <version> `removing'
+# <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+#
+# quoting from the policy:
+# Any necessary prompting should almost always be confined to the
+# post-installation script, and should be protected with a conditional
+# so that unnecessary prompting doesn't happen if a package's
+# installation fails and the `postinst' is called with `abort-upgrade',
+# `abort-remove' or `abort-deconfigure'.
+LOCAL_DIRS="share/pike/site_pike share/pike${PIKE}/site_pike lib/pike/site_pike lib/pike${PIKE}/site_pike include/pike include/pike${PIKE}"
+
+case "$1" in
+ configure)
+ /usr/sbin/update-alternatives --install /usr/bin/pike pike /usr/bin/${PIKEBIN} 10 \
+ --slave /usr/share/man/man1/pike.1.gz pike.1.gz /usr/share/man/man1/${PIKEBIN}.1.gz
+ #
+ # If the creation fails, so be it, user might have the filesystem mounted r/o
+ #
+ for d in $LOCAL_DIRS; do
+ if [ ! -d /usr/local/$d ]; then
+ install -d -m 755 -o root -g root /usr/local/$d || true
+ fi
+ done
+ ;;
+
+ abort-upgrade|abort-remove|abort-deconfigure)
+
+ ;;
+
+ *)
+ echo "postinst called with unknown argument \`$1'" >&2
+ exit 1
+ ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
Index: 7.6/debian/pike7.6-core.prerm
===================================================================
--- 7.6/debian/pike7.6-core.prerm (nonexistent)
+++ 7.6/debian/pike7.6-core.prerm (revision 23)
@@ -0,0 +1,44 @@
+#! /bin/sh
+# prerm script for pike7.6
+#
+# see: dh_installdeb(1)
+#
+# $Id: pike7.6-core.prerm,v 1.1 2005/11/21 20:21:48 grendel Exp $
+#
+
+set -e
+
+PIKE=7.6
+PIKEBIN=pike${PIKE}
+
+# summary of how this script can be called:
+# * <prerm> `remove'
+# * <old-prerm> `upgrade' <new-version>
+# * <new-prerm> `failed-upgrade' <old-version>
+# * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
+# * <deconfigured's-prerm> `deconfigure' `in-favour'
+# <package-being-installed> <version> `removing'
+# <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+case "$1" in
+ remove|upgrade|deconfigure)
+ update-alternatives --remove pike /usr/bin/${PIKEBIN}
+ ;;
+ failed-upgrade)
+ ;;
+ *)
+ echo "prerm called with unknown argument \`$1'" >&2
+ exit 1
+ ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
Index: 7.6/debian/pike7.6-manual.install
===================================================================
--- 7.6/debian/pike7.6-manual.install (nonexistent)
+++ 7.6/debian/pike7.6-manual.install (revision 23)
@@ -0,0 +1,2 @@
+
+
Index: 7.6/debian/specs.in
===================================================================
--- 7.6/debian/specs.in (nonexistent)
+++ 7.6/debian/specs.in (revision 23)
@@ -0,0 +1,7 @@
+CC=gcc
+CFLAGS=-O2 -DDEBIAN
+LDFLAGS=-L/usr/lib -L/usr/X11R6/lib
+CPPFLAGS=-I/usr/include/pike/@PIKEVERSION@/ -I/usr/include
+CPP=gcc -E
+LDSHARED=gcc -shared
+configure_args=@CONFIGURE_ARGS@
Index: 7.6/debian/compat
===================================================================
--- 7.6/debian/compat (nonexistent)
+++ 7.6/debian/compat (revision 23)
@@ -0,0 +1 @@
+4
Index: 7.6/debian/pike7.6-reference.install
===================================================================
--- 7.6/debian/pike7.6-reference.install (nonexistent)
+++ 7.6/debian/pike7.6-reference.install (revision 23)
@@ -0,0 +1,2 @@
+
+
Index: 7.6/debian/pike7.6-core.postrm
===================================================================
--- 7.6/debian/pike7.6-core.postrm (nonexistent)
+++ 7.6/debian/pike7.6-core.postrm (revision 23)
@@ -0,0 +1,43 @@
+#! /bin/sh
+# postrm script for #PACKAGE#
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <postrm> `remove'
+# * <postrm> `purge'
+# * <old-postrm> `upgrade' <new-version>
+# * <new-postrm> `failed-upgrade' <old-version>
+# * <new-postrm> `abort-install'
+# * <new-postrm> `abort-install' <old-version>
+# * <new-postrm> `abort-upgrade' <old-version>
+# * <disappearer's-postrm> `disappear' <r>overwrit>r> <new-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+ purge)
+ for d in include/pike include/pike7.6 lib/pike/site_pike lib/pike lib/pike7.6/site_pike lib/pike7.6 share/pike/site_pike \
+ share/pike share/pike7.6/site_pike share/pike7.6; do
+ rmdir /usr/local/$d || true
+ done
+ ;;
+
+ remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+ ;;
+
+ *)
+ echo "postrm called with unknown argument \`$1'" >&2
+ exit 1
+
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
Index: 7.6/debian/pike-config.in
===================================================================
--- 7.6/debian/pike-config.in (nonexistent)
+++ 7.6/debian/pike-config.in (revision 23)
@@ -0,0 +1,36 @@
+#!/bin/sh
+#
+# $Id: pike-config.in,v 1.1 2002/08/12 01:02:31 grendel Exp $
+#
+
+MY_CFLAGS="@CFLAGS@"
+MY_LDFLAGS="@LDFLAGS@"
+MY_VERSION="@MAJOR@.@MINOR@.@BUILD@"
+
+if test -z "$1"; then
+ cat <<EOF
+Usage: pike-config [--cflags] [--ldflags] [--version]
+
+ --cflags Print the compiler flags required to compile a module
+ --ldflags Print the linker flags required to link a module
+ --version Print the pike version for which the compilation is taking
+ place
+
+EOF
+ exit 1
+fi
+
+while true; do
+ if test -z "$1"; then
+ break
+ fi
+
+ case $1 in
+ --cflags) echo -n "${MY_CFLAGS} " ;;
+ --ldflags) echo -n "${MY_LDFLAGS} " ;;
+ --version) echo -n "${MY_VERSION} " ;;
+ esac
+ shift
+done
+
+echo
Index: 7.6/debian
===================================================================
--- 7.6/debian (nonexistent)
+++ 7.6/debian (revision 23)
/7.6/debian
Property changes:
Added: mergeWithUpstream
## -0,0 +1 ##
+1
\ No newline at end of property