WebSVN - Diff - Rev 31 and 71 - /trunk/debian/Config


# $Cambridge: hermes/src/prayer/defaults/Config,v 1.12 2008/05/21 13:25:13 dpc22 Exp $
#
# Prayer - a Webmail Interface
#
# Copyright (c) University of Cambridge 2000 - 2002
# See the file NOTICE for conditions of use and distribution.
#
# Conventional Configure file.

SSL_ENABLE           = true   # SSL requires OpenSSL
SESSION_CACHE_ENABLE = true   # SSL session cache Requires Berkeley DB 3 or 4
GZIP_ENABLE          = true   # Enable on the fly compression of pages
LDAP_ENABLE          = true   # Add LDAP interface
FENCE_ENABLE         = false  # Use Electric Fence to catch malloc problems
MUTEX_SEMAPHORE      = true   # Use SYSV mutexes rather than file locking

# Following depend on the way that you have configured c-client
CCLIENT_SSL_ENABLE   = false  # C-client was built with SSL support
CCLIENT_PAM_ENABLE   = false  # C-client was built with PAM support
CCLIENT_KERB_ENABLE  = false  # C-client was built with Kerberos support

# Probably don't need the following
ACCOUNTD_ENABLE      = true  # Only of use in Cambridge at the moment.
ACCOUNTD_SSL_ENABLE  = true   # Enable SSL support in account management daemon
ACCOUNTD_PAM_ENABLE  = true   # Enable PAM support in account management daemon
ACCOUNTD_USE_BSD_PTY = false  # Use Berkeley PTYs rather than Sys V PTYs

############################################################################
# Location of compiler
CC           = gcc
# Location of make program (GNU make required)
MAKE         = make
# Location of install program (GNU install or compatible required)
INSTALL      = install

# Base Compiler options for GCC (use CFLAGS, CPPFLAGS and LDFLAGS if passed in)
 
BASECFLAGS   := $(CFLAGS)
 
BASECFLAGS   ?= -Wall -g -O2
 
 
BASECFLAGS   += $(CPPFLAGS)

 
BASELDFLAGS  := $(LDFLAGS)
 
BASELDFLAGS  ?= -g
 

# Minimal libraries needed by Linux
BASE_LIBS    = -lcrypt
# FreeBSD needs some extra libraries:
# BASE_LIBS   = -lcrypt -liconv -lutil
# Solaris needs even more libararies:
# BASE_LIBS   = -lcrypt -lxnet -lnsl -lsocket

# Base Compiler options for Sun SUNWspro compiler
#CC          = /opt/SUNWspro/bin/cc
#BASECFLAGS  = -fast
#BASELDFLAGS = -s

############################################################################
# Location of various include files and libraries.
############################################################################

# Location of c-client library.
CCLIENT_DIR=/usr/include/c-client
CCLIENT_INCLUDE=-I$(CCLIENT_DIR)
CCLIENT_LIBS=-lc-client

# Electric fence (required if FENCE_ENABLE set)
FENCE_INCLUDE=
FENCE_LIBS=-lmcheck

# Zlib (required if GZIP_ENABLE set)
Z_INCLUDE =
Z_LIBS    = -lz

# LDAP (required if LDAP_ENABLE set)
LDAP_INCLUDE = 
LDAP_LIBS    = -lldap

# Pam (required if CCLIENT_PAM_ENABLE set)
PAM_INCLUDE =
PAM_LIBS    = -lpam

# Kerberos (required if CCLIENT_KERB_ENABLE set)
KERB_INCLUDE =
KERB_LIBS    = -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err

# SSL definitions (required if SSL_ENABLE or CCLIENT_SSL_ENABLE set)
#
# Following suitable for Linux and FreeBSD which have SSL preinstalled
# (Header files from OpenSSL 0.9.7 want to include various Kerboros stuff)
#
SSL_INCLUDE=
SSL_LIBS=-lssl -lcrypto
OPENSSL=openssl

# Following definitions suitable for our Sun systems.
#SSL_BASE=/opt/local/ssl/current
#SSL_INCLUDE=-I ${SSL_BASE}/include
#SSL_LIBS=-L ${SSL_BASE}/lib -lssl -lcrypto
#OPENSSL=${SSL_BASE}/bin/openssl

# DB definitions (required if SESSION_CACHE_ENABLE set)
#
# Following suitable for Redhat Linux which has DB 3 preinstalled
DB_INCLUDE=
DB_LIBS=-ldb

# Following suitable for FreeBSD with DB 4 package installed
#DB_INCLUDE=-I/usr/local/include/db4
#DB_LIBS=-L/usr/local/lib -ldb4

############################################################################

# Install location of prayer configuration and support files. The initial
# config file runs prayer processes as user "prayer" and group "prayer".
# If you are using SSL, the certificate file must be readable by RW_USER or
# RW_GROUP. It is important that nothing else can read the certificate file.

# Build root (used by Redhat RPM system)
BROOT=$(CURDIR)/../debian/tmp

# Directory, User and group for read-write files: log files, sockets etc
VAR_PREFIX = /var/run/prayer
RW_USER    = root
RW_GROUP   = root

# Root Directory, User and group for read-only configuration files.
# Default configuration and permissions does not allow prayer user to
# update prayer configuration file.

PREFIX    = /usr/share/prayer
RO_USER   = root
RO_GROUP  = root

# Access permissions for general objects (wrt above users and groups)
PUBLIC_EXEC  = 0755
PUBLIC_DIR   = 0755
PUBLIC_FILE  = 0644

# Access permissions for private objects (wrt above users and groups)
PRIVATE_EXEC = 0750
PRIVATE_DIR  = 0750
PRIVATE_FILE = 0640

# Location of configuration files and binaries
PRAYER_CONFIG_FILE   = /etc/prayer/prayer.cf
BIN_DIR              = /usr/sbin
ACCOUNTD_CONFIG_FILE = /etc/prayer/accountd.cf

Rev 31	Rev 71
1	# $Cambridge: hermes/src/prayer/defaults/Config,v 1.12 2008/05/21 13:25:13 dpc22 Exp $	1	# $Cambridge: hermes/src/prayer/defaults/Config,v 1.12 2008/05/21 13:25:13 dpc22 Exp $
2	#	2	#
3	# Prayer - a Webmail Interface	3	# Prayer - a Webmail Interface
4	#	4	#
5	# Copyright (c) University of Cambridge 2000 - 2002	5	# Copyright (c) University of Cambridge 2000 - 2002
6	# See the file NOTICE for conditions of use and distribution.	6	# See the file NOTICE for conditions of use and distribution.
7	#	7	#
8	# Conventional Configure file.	8	# Conventional Configure file.
9		9
10	SSL_ENABLE = true # SSL requires OpenSSL	10	SSL_ENABLE = true # SSL requires OpenSSL
11	SESSION_CACHE_ENABLE = true # SSL session cache Requires Berkeley DB 3 or 4	11	SESSION_CACHE_ENABLE = true # SSL session cache Requires Berkeley DB 3 or 4
12	GZIP_ENABLE = true # Enable on the fly compression of pages	12	GZIP_ENABLE = true # Enable on the fly compression of pages
13	LDAP_ENABLE = true # Add LDAP interface	13	LDAP_ENABLE = true # Add LDAP interface
14	FENCE_ENABLE = false # Use Electric Fence to catch malloc problems	14	FENCE_ENABLE = false # Use Electric Fence to catch malloc problems
15	MUTEX_SEMAPHORE = true # Use SYSV mutexes rather than file locking	15	MUTEX_SEMAPHORE = true # Use SYSV mutexes rather than file locking
16		16
17	# Following depend on the way that you have configured c-client	17	# Following depend on the way that you have configured c-client
18	CCLIENT_SSL_ENABLE = false # C-client was built with SSL support	18	CCLIENT_SSL_ENABLE = false # C-client was built with SSL support
19	CCLIENT_PAM_ENABLE = false # C-client was built with PAM support	19	CCLIENT_PAM_ENABLE = false # C-client was built with PAM support
20	CCLIENT_KERB_ENABLE = false # C-client was built with Kerberos support	20	CCLIENT_KERB_ENABLE = false # C-client was built with Kerberos support
21		21
22	# Probably don't need the following	22	# Probably don't need the following
23	ACCOUNTD_ENABLE = true # Only of use in Cambridge at the moment.	23	ACCOUNTD_ENABLE = true # Only of use in Cambridge at the moment.
24	ACCOUNTD_SSL_ENABLE = true # Enable SSL support in account management daemon	24	ACCOUNTD_SSL_ENABLE = true # Enable SSL support in account management daemon
25	ACCOUNTD_PAM_ENABLE = true # Enable PAM support in account management daemon	25	ACCOUNTD_PAM_ENABLE = true # Enable PAM support in account management daemon
26	ACCOUNTD_USE_BSD_PTY = false # Use Berkeley PTYs rather than Sys V PTYs	26	ACCOUNTD_USE_BSD_PTY = false # Use Berkeley PTYs rather than Sys V PTYs
27		27
28	############################################################################	28	############################################################################
29	# Location of compiler	29	# Location of compiler
30	CC = gcc	30	CC = gcc
31	# Location of make program (GNU make required)	31	# Location of make program (GNU make required)
32	MAKE = make	32	MAKE = make
33	# Location of install program (GNU install or compatible required)	33	# Location of install program (GNU install or compatible required)
34	INSTALL = install	34	INSTALL = install
35		35
36	# Base Compiler options for GCC (use CPPFLAGS and LDFLAGS if passed in)	36	# Base Compiler options for GCC (use CFLAGS, CPPFLAGS and LDFLAGS if passed in)
37	ifdef CPPFLAGS	-
38	BASECFLAGS = $(CPPFLAGS)	37	BASECFLAGS := $(CFLAGS)
39	else	-
40	BASECFLAGS = -Wall -g -O2	38	BASECFLAGS ?= -Wall -g -O2
41	endif	-
42	ifdef INCLUDES	-
43	BASECFLAGS += $(INCLUDES)	39	BASECFLAGS += $(CPPFLAGS)
44	endif	40
45	ifdef LDFLAGS	-
46	BASELDFLAGS = $(LDFLAGS)	41	BASELDFLAGS := $(LDFLAGS)
47	else	-
48	BASELDFLAGS = -g	42	BASELDFLAGS ?= -g
49	endif	-
50		43
51	# Minimal libraries needed by Linux	44	# Minimal libraries needed by Linux
52	BASE_LIBS = -lcrypt	45	BASE_LIBS = -lcrypt
53	# FreeBSD needs some extra libraries:	46	# FreeBSD needs some extra libraries:
54	# BASE_LIBS = -lcrypt -liconv -lutil	47	# BASE_LIBS = -lcrypt -liconv -lutil
55	# Solaris needs even more libararies:	48	# Solaris needs even more libararies:
56	# BASE_LIBS = -lcrypt -lxnet -lnsl -lsocket	49	# BASE_LIBS = -lcrypt -lxnet -lnsl -lsocket
57		50
58	# Base Compiler options for Sun SUNWspro compiler	51	# Base Compiler options for Sun SUNWspro compiler
59	#CC = /opt/SUNWspro/bin/cc	52	#CC = /opt/SUNWspro/bin/cc
60	#BASECFLAGS = -fast	53	#BASECFLAGS = -fast
61	#BASELDFLAGS = -s	54	#BASELDFLAGS = -s
62		55
63	############################################################################	56	############################################################################
64	# Location of various include files and libraries.	57	# Location of various include files and libraries.
65	############################################################################	58	############################################################################
66		59
67	# Location of c-client library.	60	# Location of c-client library.
68	CCLIENT_DIR=/usr/include/c-client	61	CCLIENT_DIR=/usr/include/c-client
69	CCLIENT_INCLUDE=-I$(CCLIENT_DIR)	62	CCLIENT_INCLUDE=-I$(CCLIENT_DIR)
70	CCLIENT_LIBS=-lc-client	63	CCLIENT_LIBS=-lc-client
71		64
72	# Electric fence (required if FENCE_ENABLE set)	65	# Electric fence (required if FENCE_ENABLE set)
73	FENCE_INCLUDE=	66	FENCE_INCLUDE=
74	FENCE_LIBS=-lmcheck	67	FENCE_LIBS=-lmcheck
75		68
76	# Zlib (required if GZIP_ENABLE set)	69	# Zlib (required if GZIP_ENABLE set)
77	Z_INCLUDE =	70	Z_INCLUDE =
78	Z_LIBS = -lz	71	Z_LIBS = -lz
79		72
80	# LDAP (required if LDAP_ENABLE set)	73	# LDAP (required if LDAP_ENABLE set)
81	LDAP_INCLUDE = -DLDAP_DEPRECATED	74	LDAP_INCLUDE =
82	LDAP_LIBS = -lldap	75	LDAP_LIBS = -lldap
83		76
84	# Pam (required if CCLIENT_PAM_ENABLE set)	77	# Pam (required if CCLIENT_PAM_ENABLE set)
85	PAM_INCLUDE =	78	PAM_INCLUDE =
86	PAM_LIBS = -lpam	79	PAM_LIBS = -lpam
87		80
88	# Kerberos (required if CCLIENT_KERB_ENABLE set)	81	# Kerberos (required if CCLIENT_KERB_ENABLE set)
89	KERB_INCLUDE =	82	KERB_INCLUDE =
90	KERB_LIBS = -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err	83	KERB_LIBS = -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err
91		84
92	# SSL definitions (required if SSL_ENABLE or CCLIENT_SSL_ENABLE set)	85	# SSL definitions (required if SSL_ENABLE or CCLIENT_SSL_ENABLE set)
93	#	86	#
94	# Following suitable for Linux and FreeBSD which have SSL preinstalled	87	# Following suitable for Linux and FreeBSD which have SSL preinstalled
95	# (Header files from OpenSSL 0.9.7 want to include various Kerboros stuff)	88	# (Header files from OpenSSL 0.9.7 want to include various Kerboros stuff)
96	#	89	#
97	SSL_INCLUDE=	90	SSL_INCLUDE=
98	SSL_LIBS=-lssl -lcrypto	91	SSL_LIBS=-lssl -lcrypto
99	OPENSSL=openssl	92	OPENSSL=openssl
100		93
101	# Following definitions suitable for our Sun systems.	94	# Following definitions suitable for our Sun systems.
102	#SSL_BASE=/opt/local/ssl/current	95	#SSL_BASE=/opt/local/ssl/current
103	#SSL_INCLUDE=-I ${SSL_BASE}/include	96	#SSL_INCLUDE=-I ${SSL_BASE}/include
104	#SSL_LIBS=-L ${SSL_BASE}/lib -lssl -lcrypto	97	#SSL_LIBS=-L ${SSL_BASE}/lib -lssl -lcrypto
105	#OPENSSL=${SSL_BASE}/bin/openssl	98	#OPENSSL=${SSL_BASE}/bin/openssl
106		99
107	# DB definitions (required if SESSION_CACHE_ENABLE set)	100	# DB definitions (required if SESSION_CACHE_ENABLE set)
108	#	101	#
109	# Following suitable for Redhat Linux which has DB 3 preinstalled	102	# Following suitable for Redhat Linux which has DB 3 preinstalled
110	DB_INCLUDE=	103	DB_INCLUDE=
111	DB_LIBS=-ldb	104	DB_LIBS=-ldb
112		105
113	# Following suitable for FreeBSD with DB 4 package installed	106	# Following suitable for FreeBSD with DB 4 package installed
114	#DB_INCLUDE=-I/usr/local/include/db4	107	#DB_INCLUDE=-I/usr/local/include/db4
115	#DB_LIBS=-L/usr/local/lib -ldb4	108	#DB_LIBS=-L/usr/local/lib -ldb4
116		109
117	############################################################################	110	############################################################################
118		111
119	# Install location of prayer configuration and support files. The initial	112	# Install location of prayer configuration and support files. The initial
120	# config file runs prayer processes as user "prayer" and group "prayer".	113	# config file runs prayer processes as user "prayer" and group "prayer".
121	# If you are using SSL, the certificate file must be readable by RW_USER or	114	# If you are using SSL, the certificate file must be readable by RW_USER or
122	# RW_GROUP. It is important that nothing else can read the certificate file.	115	# RW_GROUP. It is important that nothing else can read the certificate file.
123		116
124	# Build root (used by Redhat RPM system)	117	# Build root (used by Redhat RPM system)
125	BROOT=$(CURDIR)/../debian/tmp	118	BROOT=$(CURDIR)/../debian/tmp
126		119
127	# Directory, User and group for read-write files: log files, sockets etc	120	# Directory, User and group for read-write files: log files, sockets etc
128	VAR_PREFIX = /var/run/prayer	121	VAR_PREFIX = /var/run/prayer
129	RW_USER = root	122	RW_USER = root
130	RW_GROUP = root	123	RW_GROUP = root
131		124
132	# Root Directory, User and group for read-only configuration files.	125	# Root Directory, User and group for read-only configuration files.
133	# Default configuration and permissions does not allow prayer user to	126	# Default configuration and permissions does not allow prayer user to
134	# update prayer configuration file.	127	# update prayer configuration file.
135		128
136	PREFIX = /usr/share/prayer	129	PREFIX = /usr/share/prayer
137	RO_USER = root	130	RO_USER = root
138	RO_GROUP = root	131	RO_GROUP = root
139		132
140	# Access permissions for general objects (wrt above users and groups)	133	# Access permissions for general objects (wrt above users and groups)
141	PUBLIC_EXEC = 0755	134	PUBLIC_EXEC = 0755
142	PUBLIC_DIR = 0755	135	PUBLIC_DIR = 0755
143	PUBLIC_FILE = 0644	136	PUBLIC_FILE = 0644
144		137
145	# Access permissions for private objects (wrt above users and groups)	138	# Access permissions for private objects (wrt above users and groups)
146	PRIVATE_EXEC = 0750	139	PRIVATE_EXEC = 0750
147	PRIVATE_DIR = 0750	140	PRIVATE_DIR = 0750
148	PRIVATE_FILE = 0640	141	PRIVATE_FILE = 0640
149		142
150	# Location of configuration files and binaries	143	# Location of configuration files and binaries
151	PRAYER_CONFIG_FILE = /etc/prayer/prayer.cf	144	PRAYER_CONFIG_FILE = /etc/prayer/prayer.cf
152	BIN_DIR = /usr/sbin	145	BIN_DIR = /usr/sbin
153	ACCOUNTD_CONFIG_FILE = /etc/prayer/accountd.cf	146	ACCOUNTD_CONFIG_FILE = /etc/prayer/accountd.cf

Subversion Repositories

(root)/trunk/debian/Config - Rev 31 → 71