Subversion Repositories

?revision_form?Rev ?revision_input??revision_submit??revision_endform?

Rev 1 | Only display areas with differences | Ignore whitespace | Details | Blame | Last modification | View Log | RSS feed

Rev 1 Rev 2
1
READ THIS FIRST
1
READ THIS FIRST
2
---------------
2
---------------
3
If you try to build with 'make' without editing the makefile for sa-exim to
3
If you try to build with 'make' without editing the makefile for sa-exim to
4
see the exim source, and if you haven't patched your exim source with 
4
see the exim source, and if you haven't patched your exim source with 
5
localscan_dlopen.patch, sa-exim will not build.
5
localscan_dlopen.patch, sa-exim will not build.
6
This is normal, see the BUILDING section below
6
This is normal, see the BUILDING section below
7
7
8
This version of sa-exim now requires at least exim 4.11
8
This version of sa-exim now requires at least exim 4.11
9
9
10
10
11
11
12
12
13
BUILDING
13
BUILDING
14
--------
14
--------
15
The code can be compiled in two ways:
15
The code can be compiled in two ways:
16
16
17
0) Do not set LOCAL_SCAN_HAS_OPTIONS=yes in exim's Makefile. Leave the
17
0) Do not set LOCAL_SCAN_HAS_OPTIONS=yes in exim's Makefile. Leave the
18
   default which is disabled.
18
   default which is disabled.
19
19
20
1) Unpack exim 4.11 or better, and overwrite src/local_scan.c with 
20
1) Unpack exim 4.11 or better, and overwrite src/local_scan.c with 
21
   sa-exim.c. 
21
   sa-exim.c. 
22
   In the sa-exim distribution directory, type make sa-exim.h, and copy
22
   In the sa-exim distribution directory, type make sa-exim.h, and copy
23
   it in the same place than sa-exim.c.
23
   it in the same place than sa-exim.c.
24
   Rebuild exim, and you're done.
24
   Rebuild exim, and you're done.
25
   Note that if you do this, you are responsible for modifying variables
25
   Note that if you do this, you are responsible for modifying variables
26
   in sa-exim.c that would normally have been modified by the Makefile.
26
   in sa-exim.c that would normally have been modified by the Makefile.
27
   
27
   
28
   This method might seem simpler, but it requires that you rebuild exim every
28
   This method might seem simpler, but it requires that you rebuild exim every
29
   time you upgrade sa-exim.
29
   time you upgrade sa-exim.
30
30
31
2) The better solution is to patch exim with localscan_dlopen.patch originally
31
2) The better solution is to patch exim with localscan_dlopen.patch originally
32
   from David Woodhouse (provided in this archive), and rebuild exim.
32
   from David Woodhouse (provided in this archive), and rebuild exim.
33
   Here are details on how to patch exim if yours needs it (at least debian's
33
   Here are details on how to patch exim if yours needs it (at least debian's
34
   exim4 is prepatched, yours may be too).
34
   exim4 is prepatched, yours may be too).
35
   Choose the patch for your exim version (Philip included the portion that 
35
   Choose the patch for your exim version (Philip included the portion that 
36
   sets LOCAL_SCAN_ABI_VERSION_MAJOR and LOCAL_SCAN_ABI_VERSION_MINOR in exim
36
   sets LOCAL_SCAN_ABI_VERSION_MAJOR and LOCAL_SCAN_ABI_VERSION_MINOR in exim
37
   4.20)
37
   4.20)
38
   - localscan_dlopen_exim_4.20_or_better.patch
38
   - localscan_dlopen_exim_4.20_or_better.patch
39
   - localscan_dlopen_up_to_4.14.patch
39
   - localscan_dlopen_up_to_4.14.patch
40
40
41
41
42
   What you gain from doing this is that sa-exim, or another local_scan module
42
   What you gain from doing this is that sa-exim, or another local_scan module
43
   can be plugged into exim without rebuilding exim itself (here too you need
43
   can be plugged into exim without rebuilding exim itself (here too you need
44
   exim 4.11 or better)
44
   exim 4.11 or better)
45
45
46
   To build, you can edit EXIM_SRC in the Makefile and build sa-exim-x.y.so,
46
   To build, you can edit EXIM_SRC in the Makefile and build sa-exim-x.y.so,
47
   or I have also recently modified the build environment so that you can
47
   or I have also recently modified the build environment so that you can
48
   now build sa-exim without having the exim sources.
48
   now build sa-exim without having the exim sources.
49
   You can look in eximinc/version to see which source I included. While this
49
   You can look in eximinc/version to see which source I included. While this
50
   should work for the forseable future, the exim local_scan API might change
50
   should work for the forseable future, the exim local_scan API might change
51
   one day and not building against the current exim sources could cause issues
51
   one day and not building against the current exim sources could cause issues
52
   (hopefully, at worst it will prevent sa-exim from using better functions in
52
   (hopefully, at worst it will prevent sa-exim from using better functions in
53
   newer versions of the local_scan API).
53
   newer versions of the local_scan API).
54
   To be really safe, I modified the localscan_dlopen patch to include a
54
   To be really safe, I modified the localscan_dlopen patch to include a
55
   minor and major version number for the API. Philip has agreed to including
55
   minor and major version number for the API. Philip has agreed to including
56
   the piece of the patch that says which version of the API exim is using,
56
   the piece of the patch that says which version of the API exim is using,
57
   so it will be obvious in the future whether exim becomes potentially
57
   so it will be obvious in the future whether exim becomes potentially
58
   incompatible with an older version of sa-exim. Note that when Philip adds
58
   incompatible with an older version of sa-exim. Note that when Philip adds
59
   this small portion of the patch, you will have a resulting conflict if
59
   this small portion of the patch, you will have a resulting conflict if
60
   you try to apply it again. This is obviously normal, just remove it :-)
60
   you try to apply it again. This is obviously normal, just remove it :-)
61
61
62
   Once you're done building, you can copy sa-exim-x.y.so and optionally the
62
   Once you're done building, you can copy sa-exim-x.y.so and optionally the
63
   dummy/test accept.so in /usr/lib/exim4/local_scan/, and add this to your
63
   dummy/test accept.so in /usr/lib/exim4/local_scan/, and add this to your
64
   exim4.conf (at the beginning of the file)
64
   exim4.conf (at the beginning of the file)
65
   #local_scan_path = /usr/lib/exim4/local_scan/accept.so
65
   #local_scan_path = /usr/lib/exim4/local_scan/accept.so
66
   local_scan_path = /usr/lib/exim4/local_scan/sa-exim.so
66
   local_scan_path = /usr/lib/exim4/local_scan/sa-exim.so
67
67
68
   If you are a package builder, note that you don't actually have
68
   If you are a package builder, note that you don't actually have
69
   to edit the values in the Makefile, you can override them as such:
69
   to edit the values in the Makefile, you can override them as such:
70
   make SACONF=/etc/mail/sa-exim.conf LDFLAGS="-shared -fPIC"
70
   make SACONF=/etc/mail/sa-exim.conf LDFLAGS="-shared -fPIC"
71
71
72
72
73
The following is mostly obsolete, but left here for info purposes
73
The following is mostly obsolete, but left here for info purposes
74
-----------------------------------------------------------------
74
-----------------------------------------------------------------
75
I would also recommend to edit exim/src/config.h.defaults as such:
75
I would also recommend to edit exim/src/config.h.defaults as such:
76
#define STRING_SPRINTF_BUFFER_SIZE 32768
76
#define STRING_SPRINTF_BUFFER_SIZE 32768
77
The default value is a bit too small for some of the strings that we need to
77
The default value is a bit too small for some of the strings that we need to
78
expand from SA.
78
expand from SA.
79
That said, I found out that exim then complaints that the headers
79
That said, I found out that exim then complaints that the headers
80
it tries to add are too big even after I set "uschar buffer[32768];" in
80
it tries to add are too big even after I set "uschar buffer[32768];" in
81
src/header.c.
81
src/header.c.
82
As a result, I haven't quite found out how to deal with more than 8KB worth
82
As a result, I haven't quite found out how to deal with more than 8KB worth
83
of SpamAssassin headers, but it may not be a huge deal, 8KB headers are too
83
of SpamAssassin headers, but it may not be a huge deal, 8KB headers are too
84
long anyway. 
84
long anyway. 
85
I asked the SA guys not to output such huge headers and I wrote a patch
85
I asked the SA guys not to output such huge headers and I wrote a patch
86
to disable one of the "features" that outputs such huge headers.
86
to disable one of the "features" that outputs such huge headers.
87
See: http://bugzilla.spamassassin.org/showattachment.cgi?attach_id=195
87
See: http://bugzilla.spamassassin.org/showattachment.cgi?attach_id=195
88
This is included and turned on by default in Spamassassin 2.40 and later.
88
This is included and turned on by default in Spamassassin 2.40 and later.
89
89
90
90
91
INSTALL
91
INSTALL
92
-------
92
-------
93
Copy sa-exim.conf to /etc/exim4 (or whatever you set SACONF to),
93
Copy sa-exim.conf to /etc/exim4 (or whatever you set SACONF to),
94
and make sure to read it and edit the values to suit your environment.
94
and make sure to read it and edit the values to suit your environment.
95
So that you don't make any mistakes, SAEximRunCond is turned off by default.
95
So that you don't make any mistakes, SAEximRunCond is turned off by default.
96
This should force you to scan the docs before potentially shooting yourself
96
This should force you to scan the docs before potentially shooting yourself
97
in the foot :)
97
in the foot :)
98
98
99
See README for options
99
See README for options
100
100