/trunk/debian/control |
---|
0,0 → 1,18 |
Source: x2vnc |
Section: x11 |
Priority: optional |
Maintainer: Ola Lundqvist <opal@debian.org> |
Standards-Version: 3.6.2 |
Build-Depends: debhelper (>= 4.0.0), libxaw7-dev, xutils-dev, libx11-dev, libxinerama-dev, libxss-dev |
Homepage: http://fredrik.hubbe.net/x2vnc.html |
Package: x2vnc |
Architecture: any |
Depends: ${shlibs:Depends}, ${misc:Depends} |
Suggests: vnc4server, xvnc4viewer, tightvncserver, xtightvncviewer |
Description: A dual-screen hack - link an MS-Windows and X display |
This program merges the capabilities of x2x and vncviewer. It will allow a |
machine with an X display and a machine with a VNC server running on its main |
screen to act as if they were two displays connected to one machine. When you |
move your mouse pointer off the screen in a direction of your choosing, the |
pointer will appear on the other screen instead. |
/trunk/debian/dirs |
---|
0,0 → 1,0 |
usr/X11R6/bin |
/trunk/debian/compat |
---|
0,0 → 1,0 |
6 |
/trunk/debian/watch |
---|
0,0 → 1,2 |
version=3 |
http://fredrik.hubbe.net/x2vnc/x2vnc-\(.*\)\.tar\.gz debian uupdate |
/trunk/debian/changelog |
---|
0,0 → 1,219 |
x2vnc (1.7.2-1.1) unstable; urgency=low |
* Non-maintainer upload. |
* Correct build dependencies (Closes: #485529, #515411) |
* Fix and upgrade watch file (Closes: #529147) |
* Don't set DH_COMPAT in rules |
* Don't ignore errors by make clean |
* Bump compat level to six |
* Convert the copyright file to UTF-8 |
-- Raphael Geissert <geissert@debian.org> Wed, 08 Jul 2009 15:31:37 -0500 |
x2vnc (1.7.2-1) unstable; urgency=low |
* New upstream release. |
Closes: #466290. |
-- Ola Lundqvist <opal@debian.org> Tue, 25 Mar 2008 10:45:34 +0100 |
x2vnc (1.7.1-3) unstable; urgency=low |
* Removed build dependency on libvncauth-dev. |
* Removed suggests on vnc-common. Instead suggest vncservers and vncviewers. |
-- Ola Lundqvist <opal@debian.org> Tue, 4 Mar 2008 18:38:58 +0100 |
x2vnc (1.7.1-2) unstable; urgency=low |
* Made sure that it can compile even if the install target point it to |
correct place, closes: #368506. |
-- Ola Lundqvist <opal@debian.org> Mon, 29 May 2006 22:12:45 +0200 |
x2vnc (1.7.1-1) unstable; urgency=low |
* New upstream release. |
-- Ola Lundqvist <opal@debian.org> Mon, 22 May 2006 20:03:23 +0200 |
x2vnc (1.6.1-1) unstable; urgency=low |
* New upstream release. |
* Applied patch from Martin Dorey <martin.dorey@bluearc.com> to fix an |
issue on amd64, closes: #343274. |
-- Ola Lundqvist <opal@debian.org> Sat, 11 Mar 2006 17:30:13 +0100 |
x2vnc (1.6-4) unstable; urgency=low |
* Maintainer upload, closes: #349108, #346786. |
* Fixed typo in description, closes: #300047. |
* Updated standards version to 3.6.2. |
* Added listen option to manpage, closes: #317148. |
Thanks to Rob Sims <debbugs-z@robsims.com> for the patch. |
* Moved to debhelper 2 compatibility. |
-- Ola Lundqvist <opal@debian.org> Sun, 29 Jan 2006 15:06:35 +0100 |
x2vnc (1.6-3.1) unstable; urgency=low |
* Non-maintainer upload. |
* Replace build-dependency on xlibs-dev with an explicit build-dependency |
on each required package. (Closes: #346786) |
-- Steinar H. Gunderson <sesse@debian.org> Sat, 21 Jan 2006 02:18:10 +0100 |
x2vnc (1.6-3) unstable; urgency=low |
* Fixed package description, closes: #268549, #277241. |
-- Ola Lundqvist <opal@debian.org> Sat, 25 Dec 2004 21:55:57 +0100 |
x2vnc (1.6-2) unstable; urgency=low |
* Patched to make cut and paste work in KDE apps, closes: #191697. |
Thanks to "Martin Dorey" <mdorey@bluearc.com> for the patch. |
* Moved from /usr/X11R6 to /usr. |
* Fixed manpage section error, 1x != x. |
-- Ola Lundqvist <opal@debian.org> Thu, 26 Aug 2004 18:32:37 +0200 |
x2vnc (1.6-1) unstable; urgency=low |
* New upstream release, closes: #233620. |
This also fix a cut-and-paste bug, closes: #191697. |
* Updated standards version to 3.6.1. |
-- Ola Lundqvist <opal@debian.org> Wed, 28 Jul 2004 19:07:44 +0200 |
x2vnc (1.5.1-2) unstable; urgency=low |
* Added build dependency on xlibs-dev, closes: #238618. |
-- Ola Lundqvist <opal@debian.org> Sat, 20 Mar 2004 15:28:27 +0100 |
x2vnc (1.5.1-1) unstable; urgency=low |
* New upstream version, closes: #205131, #160333, #206418. |
* Updated standards version from 3.5.2 to 2.5.10. |
-- Ola Lundqvist <opal@debian.org> Sun, 31 Aug 2003 15:59:27 +0200 |
x2vnc (1.4-2) unstable; urgency=low |
* Changed from xlib6g-dev to libxaw7-dev, closes: #170180. |
-- Ola Lundqvist <opal@debian.org> Fri, 22 Nov 2002 08:26:03 +0100 |
x2vnc (1.4-1) unstable; urgency=low |
* New upstream version, closes: #148341. |
-- Ola Lundqvist <opal@debian.org> Thu, 29 Aug 2002 07:27:49 +0200 |
x2vnc (1.3-1) unstable; urgency=low |
* New upstream version, closes: #123688, #120473. |
* Updated standards version. |
* Removed depricated dh_testversion. |
-- Ola Lundqvist <opal@debian.org> Wed, 3 Apr 2002 22:37:07 +0200 |
x2vnc (1.2-2) unstable; urgency=low |
* The upstream wheel patch scrolled up when scrolling down and |
vice vera. Fixed with patch by Evan Martin <eeyem@u.washington.edu>, |
closes: #90142. |
-- Ola Lundqvist <opal@debian.org> Mon, 19 Mar 2001 22:13:32 +0100 |
x2vnc (1.2-1) unstable; urgency=low |
* New upstream version with mouse wheel support built in. Hope that |
it works equally good or better than the patches I have applied. |
-- Ola Lundqvist <opal@debian.org> Wed, 14 Mar 2001 15:45:35 +0100 |
x2vnc (1.1-6) unstable; urgency=low |
* Added a patch from Evan Martin <eeyem@u.washington.edu> that fixes |
issues with the wheel patch, closes: Bug#88716. |
-- Ola Lundqvist <opal@debian.org> Thu, 22 Feb 2001 22:44:12 +0100 |
x2vnc (1.1-5) unstable; urgency=low |
* Added xutils to build depends, closes: Bug#86586. |
-- Ola Lundqvist <opal@debian.org> Thu, 22 Feb 2001 22:44:12 +0100 |
x2vnc (1.1-4) unstable; urgency=low |
* Added suggestion of vnc-common, closes: Bug#81576. |
-- Ola Lundqvist <opal@debian.org> Fri, 2 Feb 2001 13:03:46 +0100 |
x2vnc (1.1-3) unstable; urgency=low |
* Readded dh_testversion and added a versioned debhelper dependency in the |
control file as it really should be, closes: Bug#78573. |
-- Ola Lundqvist <opal@debian.org> Sun, 3 Dec 2000 23:40:34 +0100 |
x2vnc (1.1-2) unstable; urgency=low |
* Recompiled to indicate new maintainer and to make sure that it |
works with the new c library. |
* Have also applied the x2vnc-wheel-patch (found on freshmeat). |
* Removed dh_testversion that lintian complains about from the |
debian/rules file. |
-- Ola Lundqvist <opal@debian.org> Tue, 21 Nov 2000 23:16:10 +0100 |
x2vnc (1.1-1) unstable; urgency=low |
* New upstream release |
-- Edward Betts <edward@debian.org> Sun, 21 May 2000 13:10:44 +0100 |
x2vnc (1.0-5) unstable; urgency=low |
* Imakefile: modified to compile against libvncauth0 |
* debian/control: updateded Standards-Version to 3.1.1 |
* debian/control: added Build-Depends. |
* debian/rules: rewritten. |
* debian/rules: added xmkmf. |
-- Edward Betts <edward@debian.org> Thu, 6 Jan 2000 23:59:45 +0000 |
x2vnc (1.0-4) unstable; urgency=low |
* Changed to Debhelper 2.0 |
* Updated Standards-Version: 3.0.1 |
* Lintian clean |
* Changed location of GPL to /usr/share/common-licenses/GPL |
-- Edward Betts <edward@debian.org> Sun, 12 Sep 1999 12:01:26 +0100 |
x2vnc (1.0-3) unstable; urgency=low |
* Corrected spelling of maintainers name in control (oops!) |
* Passes Lintian v0.9.5 |
-- Edward Betts <edward@debian.org> Sun, 12 Sep 1999 12:01:15 +0100 |
x2vnc (1.0-2) unstable; urgency=low |
* Improve man page |
* Fixed source packaging - now includes pristine source |
-- Edward Betts <edward@debian.org> Sun, 6 Dec 1998 11:44:48 +0000 |
x2vnc (1.0-1) unstable; urgency=low |
* Initial Release |
* Wrote a man page for x2vnc |
* Passes Lintian v0.9.4 |
-- Edward Betts <edward@debian.org> Fri, 4 Dec 1998 14:25:08 +0000 |
/trunk/debian/copyright |
---|
0,0 → 1,33 |
x2vnc was Written by Fredrik Hübinette <hubbe@hubbe.net> |
Based on ideas from x2x and code from vncviewer. |
It was packaged for use with Debian GNU/Linux by |
Edward Betts <edward@debian.org> |
The x2vnc-wheel-patch was applied by the new maintainer Ola Lundqvist |
<opal@debian.org>. This patch was written by bryan d. berg <km@underworld.net> |
and found on freshmeat: http://freshmeat.net/projects/x2vnc-wheel-patch/ |
The latest version of this program should be available from |
http://www.hubbe.net/~hubbe/x2vnc.html |
The current version is http://www.hubbe.net/~hubbe/x2vnc-1.1.tar.gz |
For more info about VNC: http://www.uk.research.att.com/vnc/ |
For more info about x2x: http://ftp.digital.com/pub/Digital/SRC/x2x/ |
The main changes to the package are the addition of Debian packaging |
and changing x2vnc so it links dynamically rather than statically |
with libvncauth. |
The code is: |
Copyright (C) 1997, 1998 Olivetti & Oracle Research Laboratory |
This is free software; you can redistribute it and/or modify |
it under the terms of the GNU General Public License as published by |
the Free Software Foundation; either version 2 of the License, or |
(at your option) any later version. |
On Debian GNU/Linux systems, the complete text of the GNU General |
Public License can be found in `/usr/share/common-licenses/GPL'. |
/trunk/debian/docs |
---|
0,0 → 1,0 |
README |
/trunk/debian/rules |
---|
0,0 → 1,86 |
#!/usr/bin/make -f |
# debian/rules for freesweep |
# modifications by Edward Betts <edward@debian.org> |
# Based on: |
# Sample debian/rules that uses debhelper. |
# GNU copyright 1997 to 1999 by Joey Hess. |
# Uncomment this to turn on verbose mode. |
#export DH_VERBOSE=1 |
# This has to be exported to make some magic below work. |
export DH_OPTIONS |
build: build-stamp |
build-stamp: |
dh_testdir |
xmkmf |
#$(MAKE) x2vnc |
$(MAKE) |
touch build-stamp |
clean: |
dh_testdir |
dh_testroot |
rm -f build-stamp |
[ ! -f Makefile ] || $(MAKE) clean |
dh_clean Makefile |
install: build |
dh_testdir |
dh_testroot |
dh_clean -k |
dh_installdirs |
#install -o root -g root -m 755 x2vnc \ |
# `pwd`/debian/x2vnc/usr/X11R6/bin |
$(MAKE) DESTDIR=`pwd`/debian/x2vnc install |
#mkdir -p debian/x2vnc/usr/X11R6/bin |
#-mv debian/x2vnc/usr/X11R6/bin/* debian/x2vnc/usr/bin |
#mkdir -p debian/x2vnc/usr/share/man |
#-mv debian/x2vnc/usr/X11R6/man/* debian/x2vnc/usr/share/man |
-rmdir debian/x2vnc/usr/X11R6/bin |
#-rmdir debian/x2vnc/usr/X11R6/man |
-rmdir debian/x2vnc/usr/X11R6 |
mv debian/x2vnc/usr/share/man/man1/x2vnc.1x \ |
debian/x2vnc/usr/share/man/man1/x2vnc.1 |
# Build architecture-independent files here. |
binary-indep: build install |
# We have nothing to do by default. |
# Build architecture-dependent files here. |
binary-arch: build install |
dh_testdir |
dh_testroot |
# dh_installdebconf |
dh_installdocs |
dh_installexamples |
dh_installmenu |
# dh_installemacsen |
# dh_installpam |
# dh_installmime |
# dh_installinit |
# dh_installcron |
# dh_installmanpages |
# dh_installinfo |
# dh_undocumented |
dh_installchangelogs |
dh_link |
dh_strip |
dh_compress |
dh_fixperms |
# dh_makeshlibs |
dh_installdeb |
# dh_perl |
dh_shlibdeps |
dh_gencontrol |
dh_md5sums |
dh_builddeb |
binary: binary-indep binary-arch |
.PHONY: build clean binary-indep binary-arch binary install |
Property changes: |
Added: svn:executable |
## -0,0 +1 ## |
+* |
\ No newline at end of property |
Index: debian |
=================================================================== |
--- debian (nonexistent) |
+++ debian (revision 3) |
/debian |
---|
Property changes: |
Added: mergeWithUpstream |
## -0,0 +1 ## |
+1 |
\ No newline at end of property |
Index: x2vnc.man |
=================================================================== |
--- x2vnc.man (nonexistent) |
+++ x2vnc.man (revision 3) |
@@ -0,0 +1,285 @@ |
+.TH x2vnc 1 |
+.SH NAME |
+x2vnc \- a dual-screen hack |
+ |
+.SH SYNOPSIS |
+.B x2vnc |
+.I <options> |
+.I <host>:<display#> |
+.br |
+.B x2vnc |
+.I <options> |
+.I -listen |
+.I [<display#>] |
+.br |
+[ |
+.B \-display |
+.I display |
+] |
+.br |
+[ |
+.B -version |
+] |
+.br |
+[ |
+.B -shared |
+] |
+.br |
+[ |
+.B -north |
+] [ |
+.B -south |
+] [ |
+.B -east |
+] [ |
+.B -west |
+] |
+.br |
+[ |
+.B -hotkey |
+.I key |
+] |
+.br |
+[ |
+.B -passwdfile |
+.I passwd-file |
+] |
+.br |
+[ |
+.B -resurface |
+] |
+.br |
+[ |
+.B -edgewidth |
+.I width |
+] |
+.br |
+[ |
+.B -desktop |
+.I desktop-number |
+] |
+.br |
+[ |
+.B -timeout |
+.I seconds |
+] |
+.br |
+[ |
+.B -wheelhack |
+] |
+.br |
+[ |
+.B -nowheel |
+] |
+.br |
+[ |
+.B -reversewheel |
+] |
+.br |
+[ |
+.B -scrolllines |
+.I lines |
+] |
+.br |
+[ |
+.B -navhack |
+] |
+.br |
+[ |
+.B -mac |
+] |
+.br |
+[ |
+.B -trimsel |
+] |
+.br |
+[ |
+.B -noblank |
+] |
+.br |
+[ |
+.B -lockdelay |
+.I seconds |
+] |
+.br |
+[ |
+.B -debug |
+] |
+.br |
+[ |
+.B -accel |
+.I multiplier |
+] |
+.br |
+[ |
+.B -noreconnect |
+] |
+.br |
+[ |
+.B -tunnel |
+] |
+.br |
+[ |
+.B -via |
+.I host |
+] |
+.SH DESCRIPTION |
+.I x2vnc |
+will let you use two screens on two different computers as if they were |
+connected to the same computer. The computer with the 'main' keyboard must |
+be running X-window, and the second computer should have a VNC server |
+running which will update the contents on the actual screen. This means |
+\fIXvnc\fR is not suitable, but \fIWinVNC\fR is. |
+ |
+In listen mode ( |
+.B -listen |
+option specified ) |
+.I x2vnc |
+will wait for a connection from a VNC server on ports 5400 and 5500 (plus |
+the optional |
+.I display# |
+value) instead of connecting to a specified VNC server. |
+ |
+For up-to-date information on x2vnc, see the x2vnc home page: |
+.B http://fredrik.hubbe.net/x2vnc.html |
+ |
+.TP |
+\fB\-display\fR \fIdisplay\fR |
+The X windows display to connect from. |
+.TP |
+\fB\-shared\fR |
+Allow multiple connections to the same VNC server. |
+.TP |
+\fB\-north\fR, \fB\-south\fR, \fB\-east\fR, \fB\-west\fR, |
+Determine which edge leads to the other screen. |
+.TP |
+\fB\-passwdfile\fR \fIpassword-file\fR |
+With this option you can start x2vnc without entering a password. The file is |
+created by \fBvncpasswd\fR which comes with the X-windows VNC software. |
+If the file does not exist, \fIx2vnc\fR will ask for a password and |
+create the file. |
+.TP |
+\fB\-resurface\fR |
+This option will cause the trigger window to re-surface automatically if it is |
+covered up by another window. |
+.TP |
+\fB\-hotkey\fR \fIkey\fR |
+This option allows you to select which key to use to warp the pointer |
+to and from second computer. The default is "Control-F12", any |
+combination of modifiers can be used, such as "shift-alt-meta-ctrl-F1" |
+(or s-a-m-c-F1). |
+.TP |
+\fB\-edgewidth\fR \fIpixels\fR |
+This is a workaround for some X servers which do not allow the mouse to |
+go all the way to the edge of the screen. By setting this to 2 or greater, the |
+mouse will be able to reach the x2vnc window and thus warp to the |
+windows machine. The default value is 1. If you set this value to 0, |
+no border will be generated, which means you will have to use hotkeys |
+to switch to the oher screen. |
+.TP |
+\fB\-desktop\fR \fIdesktop-number\fR |
+With this option, you can make x2vnc non-sticky. This may not work |
+with all window-managers. Note that the first desktop is usually |
+0 (zero). If you want x2vnc to appear on the last (rightmost) desktop, |
+use -1. This option was especially created with the sawfish edgeflipping |
+in mind, normally you would use "-west -desktop 0" or "-east -destkop -1" |
+with Sawfish to allow edgeflipping to work normally. |
+.TP |
+\fB\-timeout\fR \fIseconds\fR |
+This options tells x2vnc how long to wait before warping the cursor back |
+to the X screen if there is no activity. The reason for this is that |
+some screen savers, such as xscreensaver, cannot activate while x2vnc is |
+in control of the cursor. The default value is 590 seconds, which is |
+equivalent to 9 minutes and 50 seconds. Using a value of 0 will disable |
+timeouts completely. |
+.TP |
+\fB\-nowheel\fR |
+This option does nothing and is left for backwards compatibility only. |
+.TP |
+\fB\-wheelhack\fR |
+This will make x2vnc tranlate all mouse wheel events into arrow up/down |
+events. Only use this if your VNC server doesn't understand mouse wheel |
+events. |
+.TP |
+\fB\-reversewheel\fR |
+Invert the up/down direction of the mouse wheel emulation. |
+This option only works if -wheelhack is used. |
+.TP |
+\fB\-scrolllines\fR \fIlines\fR |
+When using mouse wheel emulation, this selects how many up/down |
+events will be sent for each tick of the mouse wheel. |
+.TP |
+\fB\-navhack\fR |
+This will map button 6 & 7 to Alt+Left/Right, which will allow the |
+navigation buttons on some mice to behave more like they do in windows. |
+.TP |
+\fB\-mac\fR |
+Macintosh specific mode, maps second mouse button to control-mouseclick. |
+.TP |
+\fB\-trimsel\fR |
+If the X selection looks like a URL, trim leading and trailing spaces. |
+This can be useful for pasting URLs into a browser. |
+.TP |
+\fB\-noblank\fR |
+Prevent screen blanking on the remote desktop while you are working |
+on the local desktop. Requires the MIT-SCREEN-SAVER or XIDLE extension |
+to work properly. If neither of these extensions are present, the |
+remote desktop will always be kept from blanking. |
+.TP |
+\fB\-lockdelay\fR \fIseconds\fR |
+This is only meaningful when using the -noblank option. When this |
+option is present. With this option, x2vnc will not attempt to |
+wake up the remote screen if you have been idle for more than |
+the specified amount of time. This is useful if you need a password |
+to unlock the remote screen and would rather leave it blanked until |
+you need it. |
+.TP |
+\fB\-debug\fR |
+This option will make x2vnc print out information about events it |
+sends and receives to stderr for debugging purposes. |
+.TP |
+\fB\-accel\fR \fImultiplier\fR |
+This option allows you to control the speed of the mouse on the |
+remote screen. 2.0 means twice as fast, 0.5 means half as fast. |
+Default is 1.0. Note that this is multiplied with a number which |
+x2vnc calculates based on screen sizes and other factors. |
+.TP |
+\fB\-noreconnect\fR |
+This option prevents x2vnc from automatically reconnecting if the |
+connection is closed. |
+.TP |
+\fB\-tunnel\fR |
+This option makes x2vnc start an SSH tunnel to the machine being |
+controlled by x2vnc. The SSH command used can be changed by setting |
+the X2VNC_SSH_CMD environment variable. The default is: |
+.br |
+\fBssh -A -X -f -L "$LOCALPORT:$REMOTEHOST:$REMOTEPORT" \\ |
+.br |
+"$GATEWAYHOST" 'ssh-add;sleep 60'\fR |
+.TP |
+\fB\-via\fR \fIhost\fR |
+This is similar to -tunnel, but tunnels through a host different than |
+the machine being controlled by x2vnc. |
+ |
+ |
+.SH EXAMPLES |
+Most common usage: |
+.br |
+\fBx2vnc -passwdfile $HOME/.vncpasswd -resurface host:0\fR |
+ |
+To make x2vnc start (and re-start) automatically, add the following to |
+your your X startup file (usually .xinitrc): |
+.br |
+\fB |
+while :; |
+.br |
+do |
+ x2vnc -passwd $HOME/.vncpasswd -resurface host:0 |
+.br |
+ sleep 2 |
+.br |
+done |
+\fR |
+ |
+.SH AUTHOR |
+Fredrik Hübinette, hubbe@hubbe.net |