/trunk/debian/rules |
File deleted |
|
Property changes: |
Deleted: svn:executable |
## -1 +0,0 ## |
-* |
\ No newline at end of property |
Index: trunk/debian/README.Debian |
=================================================================== |
--- trunk/debian/README.Debian (revision 33) |
+++ trunk/debian/README.Debian (nonexistent) |
@@ -1,6 +0,0 @@ |
-The Debian package of x2vnc is patched to support IPv6. At this point |
-there are no -4 or -6 options, or similar, to force the use of a |
-particular protocol. Literal IPv6 addresses can be specified using |
-brackets, e.g. [2001:cafe:beef::1]:0 for display 0. |
- |
- -- Magnus Holmgren <holmgren@debian.org>, Sat, 29 Oct 2016 17:12:31 +0200 |
Index: trunk/debian/source/format |
=================================================================== |
--- trunk/debian/source/format (revision 33) |
+++ trunk/debian/source/format (nonexistent) |
@@ -1 +0,0 @@ |
-3.0 (quilt) |
Index: trunk/debian/control |
=================================================================== |
--- trunk/debian/control (revision 33) |
+++ trunk/debian/control (nonexistent) |
@@ -1,19 +0,0 @@ |
-Source: x2vnc |
-Section: x11 |
-Priority: optional |
-Maintainer: Magnus Holmgren <holmgren@debian.org> |
-Standards-Version: 3.9.8 |
-Build-Depends: dpkg-dev (>= 1.15.7), debhelper (>= 9), libxaw7-dev, |
- xutils-dev, libx11-dev, libxinerama-dev, libxss-dev |
-Homepage: http://fredrik.hubbe.net/x2vnc.html |
- |
-Package: x2vnc |
-Architecture: any |
-Depends: ${shlibs:Depends}, ${misc:Depends} |
-Suggests: vnc4server, xvnc4viewer, tightvncserver, xtightvncviewer |
-Description: Link a VNC and an X display together, simulating a multiheaded display |
- This program merges the capabilities of x2x and vncviewer. It will allow a |
- machine with an X display and a machine with a VNC server running on its main |
- screen to act as if they were two displays connected to one machine. When you |
- move your mouse pointer off the screen in a direction of your choosing, the |
- pointer will appear on the other screen instead. |
Index: trunk/debian |
=================================================================== |
--- trunk/debian (revision 33) |
+++ trunk/debian (nonexistent) |
/trunk/debian |
Property changes: |
Deleted: mergeWithUpstream |
## -1 +0,0 ## |
-1 |
\ No newline at end of property |
Index: tags/1.7.2-5/debian/changelog |
=================================================================== |
--- tags/1.7.2-5/debian/changelog (revision 33) |
+++ tags/1.7.2-5/debian/changelog (nonexistent) |
@@ -1,266 +0,0 @@ |
-x2vnc (1.7.2-5) unstable; urgency=low |
- |
- * Fix typo in synopsis (Closes: #678823). |
- |
- -- Magnus Holmgren <holmgren@debian.org> Sun, 24 Jun 2012 18:50:10 +0200 |
- |
-x2vnc (1.7.2-4) unstable; urgency=low |
- |
- * man-listen.patch: Create proper patch of "Added listen option to |
- manpage" from 1.6-4. |
- * format-security.patch (new): Fix incorrect use of fprintf() (it |
- probably wasn't too dangerous as it was only argv[0] that was used as |
- a format string). |
- * debian/rules: Use dpkg-architecture and dpkg-buildflags. |
- * debian/rules: Add build-arch and build-indep targets. |
- * Bump Standards-Version to 3.9.3. |
- |
- -- Magnus Holmgren <holmgren@debian.org> Sat, 23 Jun 2012 17:07:10 +0200 |
- |
-x2vnc (1.7.2-3) unstable; urgency=low |
- |
- * Switch to source format 3.0 (quilt). |
- * Switch from Imake to configure (enabling Xinerama). |
- * Add patch via Ubuntu that fixes a problem with the cursor not moving |
- to the remote screen when Xinerama support is enabled (Closes: |
- #616396; LP: #726783). Thanks to Will Shackleton. |
- |
- -- Magnus Holmgren <holmgren@debian.org> Sun, 06 Mar 2011 20:51:00 +0100 |
- |
-x2vnc (1.7.2-2) unstable; urgency=low |
- |
- * New maintainer (Closes: #586422). |
- * Acknowledge NMU. |
- * debian/watch: Fix URL and regexp. |
- * Remove stale and commented-out references to /usr/X11R6 in |
- debian/rules. Delete debian/dirs altogether and drop the call to |
- dh_installdirs. Also clean out irrelevant, commented-out Debhelper |
- commands. |
- * Make the version in the debhelper build dependency match |
- debian/compat. |
- * Bump Standards-Version to 3.9.1 (from 3.6.2). |
- * A few minor style changes in debian/rules. |
- * debian/copyright: Remove outdated info on changes made to the upstream |
- source as well as current version, and update URL to upstream webpage. |
- |
- -- Magnus Holmgren <holmgren@debian.org> Thu, 05 Aug 2010 10:34:21 +0200 |
- |
-x2vnc (1.7.2-1.1) unstable; urgency=low |
- |
- * Non-maintainer upload. |
- * Correct build dependencies (Closes: #485529, #515411) |
- * Fix and upgrade watch file (Closes: #529147) |
- * Don't set DH_COMPAT in rules |
- * Don't ignore errors by make clean |
- * Bump compat level to six |
- * Convert the copyright file to UTF-8 |
- |
- -- Raphael Geissert <geissert@debian.org> Wed, 08 Jul 2009 15:31:37 -0500 |
- |
-x2vnc (1.7.2-1) unstable; urgency=low |
- |
- * New upstream release. |
- Closes: #466290. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 25 Mar 2008 10:45:34 +0100 |
- |
-x2vnc (1.7.1-3) unstable; urgency=low |
- |
- * Removed build dependency on libvncauth-dev. |
- * Removed suggests on vnc-common. Instead suggest vncservers and vncviewers. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 4 Mar 2008 18:38:58 +0100 |
- |
-x2vnc (1.7.1-2) unstable; urgency=low |
- |
- * Made sure that it can compile even if the install target point it to |
- correct place, closes: #368506. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 29 May 2006 22:12:45 +0200 |
- |
-x2vnc (1.7.1-1) unstable; urgency=low |
- |
- * New upstream release. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 22 May 2006 20:03:23 +0200 |
- |
-x2vnc (1.6.1-1) unstable; urgency=low |
- |
- * New upstream release. |
- * Applied patch from Martin Dorey <martin.dorey@bluearc.com> to fix an |
- issue on amd64, closes: #343274. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 11 Mar 2006 17:30:13 +0100 |
- |
-x2vnc (1.6-4) unstable; urgency=low |
- |
- * Maintainer upload, closes: #349108, #346786. |
- * Fixed typo in description, closes: #300047. |
- * Updated standards version to 3.6.2. |
- * Added listen option to manpage, closes: #317148. |
- Thanks to Rob Sims <debbugs-z@robsims.com> for the patch. |
- * Moved to debhelper 2 compatibility. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 29 Jan 2006 15:06:35 +0100 |
- |
-x2vnc (1.6-3.1) unstable; urgency=low |
- |
- * Non-maintainer upload. |
- * Replace build-dependency on xlibs-dev with an explicit build-dependency |
- on each required package. (Closes: #346786) |
- |
- -- Steinar H. Gunderson <sesse@debian.org> Sat, 21 Jan 2006 02:18:10 +0100 |
- |
-x2vnc (1.6-3) unstable; urgency=low |
- |
- * Fixed package description, closes: #268549, #277241. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 25 Dec 2004 21:55:57 +0100 |
- |
-x2vnc (1.6-2) unstable; urgency=low |
- |
- * Patched to make cut and paste work in KDE apps, closes: #191697. |
- Thanks to "Martin Dorey" <mdorey@bluearc.com> for the patch. |
- * Moved from /usr/X11R6 to /usr. |
- * Fixed manpage section error, 1x != x. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 26 Aug 2004 18:32:37 +0200 |
- |
-x2vnc (1.6-1) unstable; urgency=low |
- |
- * New upstream release, closes: #233620. |
- This also fix a cut-and-paste bug, closes: #191697. |
- * Updated standards version to 3.6.1. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 28 Jul 2004 19:07:44 +0200 |
- |
-x2vnc (1.5.1-2) unstable; urgency=low |
- |
- * Added build dependency on xlibs-dev, closes: #238618. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 20 Mar 2004 15:28:27 +0100 |
- |
-x2vnc (1.5.1-1) unstable; urgency=low |
- |
- * New upstream version, closes: #205131, #160333, #206418. |
- * Updated standards version from 3.5.2 to 2.5.10. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 31 Aug 2003 15:59:27 +0200 |
- |
-x2vnc (1.4-2) unstable; urgency=low |
- |
- * Changed from xlib6g-dev to libxaw7-dev, closes: #170180. |
- |
- -- Ola Lundqvist <opal@debian.org> Fri, 22 Nov 2002 08:26:03 +0100 |
- |
-x2vnc (1.4-1) unstable; urgency=low |
- |
- * New upstream version, closes: #148341. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 29 Aug 2002 07:27:49 +0200 |
- |
-x2vnc (1.3-1) unstable; urgency=low |
- |
- * New upstream version, closes: #123688, #120473. |
- * Updated standards version. |
- * Removed depricated dh_testversion. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 3 Apr 2002 22:37:07 +0200 |
- |
-x2vnc (1.2-2) unstable; urgency=low |
- |
- * The upstream wheel patch scrolled up when scrolling down and |
- vice vera. Fixed with patch by Evan Martin <eeyem@u.washington.edu>, |
- closes: #90142. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 19 Mar 2001 22:13:32 +0100 |
- |
-x2vnc (1.2-1) unstable; urgency=low |
- |
- * New upstream version with mouse wheel support built in. Hope that |
- it works equally good or better than the patches I have applied. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 14 Mar 2001 15:45:35 +0100 |
- |
-x2vnc (1.1-6) unstable; urgency=low |
- |
- * Added a patch from Evan Martin <eeyem@u.washington.edu> that fixes |
- issues with the wheel patch, closes: Bug#88716. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 22 Feb 2001 22:44:12 +0100 |
- |
-x2vnc (1.1-5) unstable; urgency=low |
- |
- * Added xutils to build depends, closes: Bug#86586. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 22 Feb 2001 22:44:12 +0100 |
- |
-x2vnc (1.1-4) unstable; urgency=low |
- |
- * Added suggestion of vnc-common, closes: Bug#81576. |
- |
- -- Ola Lundqvist <opal@debian.org> Fri, 2 Feb 2001 13:03:46 +0100 |
- |
-x2vnc (1.1-3) unstable; urgency=low |
- |
- * Readded dh_testversion and added a versioned debhelper dependency in the |
- control file as it really should be, closes: Bug#78573. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 3 Dec 2000 23:40:34 +0100 |
- |
-x2vnc (1.1-2) unstable; urgency=low |
- |
- * Recompiled to indicate new maintainer and to make sure that it |
- works with the new c library. |
- * Have also applied the x2vnc-wheel-patch (found on freshmeat). |
- * Removed dh_testversion that lintian complains about from the |
- debian/rules file. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 21 Nov 2000 23:16:10 +0100 |
- |
-x2vnc (1.1-1) unstable; urgency=low |
- |
- * New upstream release |
- |
- -- Edward Betts <edward@debian.org> Sun, 21 May 2000 13:10:44 +0100 |
- |
-x2vnc (1.0-5) unstable; urgency=low |
- |
- * Imakefile: modified to compile against libvncauth0 |
- * debian/control: updateded Standards-Version to 3.1.1 |
- * debian/control: added Build-Depends. |
- * debian/rules: rewritten. |
- * debian/rules: added xmkmf. |
- |
- -- Edward Betts <edward@debian.org> Thu, 6 Jan 2000 23:59:45 +0000 |
- |
-x2vnc (1.0-4) unstable; urgency=low |
- |
- * Changed to Debhelper 2.0 |
- * Updated Standards-Version: 3.0.1 |
- * Lintian clean |
- * Changed location of GPL to /usr/share/common-licenses/GPL |
- |
- -- Edward Betts <edward@debian.org> Sun, 12 Sep 1999 12:01:26 +0100 |
- |
-x2vnc (1.0-3) unstable; urgency=low |
- |
- * Corrected spelling of maintainers name in control (oops!) |
- * Passes Lintian v0.9.5 |
- |
- -- Edward Betts <edward@debian.org> Sun, 12 Sep 1999 12:01:15 +0100 |
- |
-x2vnc (1.0-2) unstable; urgency=low |
- |
- * Improve man page |
- * Fixed source packaging - now includes pristine source |
- |
- -- Edward Betts <edward@debian.org> Sun, 6 Dec 1998 11:44:48 +0000 |
- |
-x2vnc (1.0-1) unstable; urgency=low |
- |
- * Initial Release |
- * Wrote a man page for x2vnc |
- * Passes Lintian v0.9.4 |
- |
- -- Edward Betts <edward@debian.org> Fri, 4 Dec 1998 14:25:08 +0000 |
Index: tags/1.7.2-5/debian/patches/series |
=================================================================== |
--- tags/1.7.2-5/debian/patches/series (revision 33) |
+++ tags/1.7.2-5/debian/patches/series (nonexistent) |
@@ -1,3 +0,0 @@ |
-multiscreen-cursor-stick.patch |
-man-listen.patch |
-format-security.patch |
Index: tags/1.7.2-5/debian/patches/format-security.patch |
=================================================================== |
--- tags/1.7.2-5/debian/patches/format-security.patch (revision 33) |
+++ tags/1.7.2-5/debian/patches/format-security.patch (nonexistent) |
@@ -1,97 +0,0 @@ |
-Description: Fix incorrect use of fprintf() |
-Author: Magnus Holmgren <holmgren@debian.org> |
- |
---- a/sockets.c |
-+++ b/sockets.c |
-@@ -50,7 +50,7 @@ ReadExact(int sock, char *buf, int n) |
- j = read(sock, buf + i, (n - i)); |
- if (j <= 0) { |
- if (j < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": read"); |
- } else { |
- if (errorMessageFromReadExact) { |
-@@ -81,7 +81,7 @@ WriteExact(int sock, char *buf, int n) |
- j = write(sock, buf + i, (n - i)); |
- if (j <= 0) { |
- if (j < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": write"); |
- } else { |
- fprintf(stderr,"%s: write failed\n",programName); |
-@@ -126,20 +126,20 @@ ConnectToTcpAddr(unsigned int host, int |
- |
- sock = socket(AF_INET, SOCK_STREAM, 0); |
- if (sock < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ConnectToTcpAddr: socket"); |
- return -1; |
- } |
- |
- if (connect(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ConnectToTcpAddr: connect"); |
- close(sock); |
- return -1; |
- } |
- |
- if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, (char *)&one, sizeof(one)) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ConnectToTcpAddr: setsockopt"); |
- close(sock); |
- return -1; |
-@@ -167,28 +167,28 @@ ListenAtTcpPort(int port) |
- |
- sock = socket(AF_INET, SOCK_STREAM, 0); |
- if (sock < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ListenAtTcpPort: socket"); |
- return -1; |
- } |
- |
- if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, |
- (const char *)&one, sizeof(one)) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ListenAtTcpPort: setsockopt"); |
- close(sock); |
- return -1; |
- } |
- |
- if (bind(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ListenAtTcpPort: bind"); |
- close(sock); |
- return -1; |
- } |
- |
- if (listen(sock, 5) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ListenAtTcpPort: listen"); |
- close(sock); |
- return -1; |
-@@ -244,14 +244,14 @@ AcceptTcpConnection(int listenSock) |
- |
- sock = accept(listenSock, (struct sockaddr *) &addr, &addrlen); |
- if (sock < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": AcceptTcpConnection: accept"); |
- return -1; |
- } |
- |
- if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, |
- (char *)&one, sizeof(one)) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": AcceptTcpConnection: setsockopt"); |
- close(sock); |
- return -1; |
Index: tags/1.7.2-5/debian/patches/multiscreen-cursor-stick.patch |
=================================================================== |
--- tags/1.7.2-5/debian/patches/multiscreen-cursor-stick.patch (revision 33) |
+++ tags/1.7.2-5/debian/patches/multiscreen-cursor-stick.patch (nonexistent) |
@@ -1,24 +0,0 @@ |
-Description: Fix a sticking cursor in a multi-screen configuration |
- When x2vnc is compiled with Xinerama support and runs with a multiscreen setup, |
- the cursor can become stuck on the border between the local and remote screens, |
- not moving further than the border, as it should do. |
-Author: Will Shackleton <w.shackleton@gmail.com> |
-Bug-Debian: http://bugs.debian.org/616396 |
-Bug-Ubuntu: https://launchpad.net/bugs/726783 |
-Forwarded: yes |
- |
---- a/x.c 2008-03-25 10:45:34 +0000 |
-+++ b/x.c 2011-03-03 23:34:29 +0000 |
-@@ -848,9 +848,9 @@ |
- { |
- int n,ret=a.x; |
- if(a.y < ret) ret=a.y; |
-- n=displayHeight - a.y; |
-+ n=y_offset + displayHeight - a.y; |
- if(n < ret) ret=n; |
-- n=displayWidth - a.x; |
-+ n=x_offset + displayWidth - a.x; |
- if(n < ret) ret=n; |
- return ret; |
- } |
- |
Index: tags/1.7.2-5/debian/patches/man-listen.patch |
=================================================================== |
--- tags/1.7.2-5/debian/patches/man-listen.patch (revision 33) |
+++ tags/1.7.2-5/debian/patches/man-listen.patch (nonexistent) |
@@ -1,36 +0,0 @@ |
-Bug-Debian: http://bugs.debian.org/317148 |
-Description: Add listen option to manpage |
-Author: Rob Sims <debbugs-z@robsims.com> |
- |
---- x2vnc-1.7.2.orig/x2vnc.man |
-+++ x2vnc-1.7.2/x2vnc.man |
-@@ -5,7 +5,12 @@ x2vnc \- a dual-screen hack |
- .SH SYNOPSIS |
- .B x2vnc |
- .I <options> |
--.I host:0 |
-+.I <host>:<display#> |
-+.br |
-+.B x2vnc |
-+.I <options> |
-+.I -listen |
-+.I [<display#>] |
- .br |
- [ |
- .B \-display |
-@@ -126,6 +131,15 @@ be running X-window, and the second comp |
- running which will update the contents on the actual screen. This means |
- \fIXvnc\fR is not suitable, but \fIWinVNC\fR is. |
- |
-+In listen mode ( |
-+.B -listen |
-+option specified ) |
-+.I x2vnc |
-+will wait for a connection from a VNC server on ports 5400 and 5500 (plus |
-+the optional |
-+.I display# |
-+value) instead of connecting to a specified VNC server. |
-+ |
- For up-to-date information on x2vnc, see the x2vnc home page: |
- .B http://fredrik.hubbe.net/x2vnc.html |
- |
Index: tags/1.7.2-5/debian/copyright |
=================================================================== |
--- tags/1.7.2-5/debian/copyright (revision 33) |
+++ tags/1.7.2-5/debian/copyright (nonexistent) |
@@ -1,27 +0,0 @@ |
-x2vnc was Written by Fredrik Hübinette <hubbe@hubbe.net> |
-Based on ideas from x2x and code from vncviewer. |
- |
-It was packaged for use with Debian GNU/Linux by |
-Edward Betts <edward@debian.org> |
- |
-The x2vnc-wheel-patch was applied by the new maintainer Ola Lundqvist |
-<opal@debian.org>. This patch was written by bryan d. berg <km@underworld.net> |
-and found on freshmeat: http://freshmeat.net/projects/x2vnc-wheel-patch/ |
- |
-The latest version of this program should be available from |
- |
- http://fredrik.hubbe.net/x2vnc.html |
- |
-For more info about VNC: http://www.uk.research.att.com/vnc/ |
-For more info about x2x: http://ftp.digital.com/pub/Digital/SRC/x2x/ |
- |
-The code is: |
-Copyright (C) 1997, 1998 Olivetti & Oracle Research Laboratory |
- |
-This is free software; you can redistribute it and/or modify |
-it under the terms of the GNU General Public License as published by |
-the Free Software Foundation; either version 2 of the License, or |
-(at your option) any later version. |
- |
-On Debian GNU/Linux systems, the complete text of the GNU General |
-Public License can be found in `/usr/share/common-licenses/GPL'. |
Index: tags/1.7.2-5/debian/docs |
=================================================================== |
--- tags/1.7.2-5/debian/docs (revision 33) |
+++ tags/1.7.2-5/debian/docs (nonexistent) |
@@ -1 +0,0 @@ |
-README |
Index: tags/1.7.2-5/debian/rules |
=================================================================== |
--- tags/1.7.2-5/debian/rules (revision 33) |
+++ tags/1.7.2-5/debian/rules (nonexistent) |
@@ -1,79 +0,0 @@ |
-#!/usr/bin/make -f |
-# debian/rules for freesweep |
-# modifications by Edward Betts <edward@debian.org> |
-# Based on: |
-# Sample debian/rules that uses debhelper. |
-# GNU copyright 1997 to 1999 by Joey Hess. |
- |
-# Uncomment this to turn on verbose mode. |
-#export DH_VERBOSE=1 |
- |
-DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) |
-DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) |
- |
-ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) |
- buildflags = --build=$(DEB_BUILD_GNU_TYPE) |
-else |
- buildflags = --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE) |
-endif |
- |
-config-stamp: configure |
- dh_testdir |
- ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \ |
- --prefix=/usr \ |
- --mandir=\$${prefix}/share/man \ |
- $(shell dpkg-buildflags --export=configure) |
- touch config-stamp |
- |
-build: build-arch |
-build-indep: |
-build-arch: build-stamp |
-build-stamp: config-stamp |
- dh_testdir |
- |
- $(MAKE) |
- |
- touch build-stamp |
- |
-clean: |
- dh_testdir |
- dh_testroot |
- rm -f build-stamp |
- |
- [ ! -f Makefile ] || $(MAKE) clean |
- |
- dh_clean config-stamp Makefile config.status config.log config.cache |
- |
-install: build |
- dh_testdir |
- dh_testroot |
- dh_clean -k |
- |
- install -m 755 -d $(CURDIR)/debian/x2vnc/usr/share |
- $(MAKE) DESTDIR=$(CURDIR)/debian/x2vnc install |
- |
-# Build architecture-independent files here. |
-binary-indep: |
-# We have nothing to do by default. |
- |
-# Build architecture-dependent files here. |
-binary-arch: build install |
- dh_testdir |
- dh_testroot |
- dh_installdocs |
- dh_installexamples |
- dh_installmenu |
-# dh_installmanpages |
- dh_installchangelogs |
- dh_link |
- dh_strip |
- dh_compress |
- dh_fixperms |
- dh_installdeb |
- dh_shlibdeps |
- dh_gencontrol |
- dh_md5sums |
- dh_builddeb |
- |
-binary: binary-indep binary-arch |
-.PHONY: build-arch build-indep build clean binary-indep binary-arch binary install |
/tags/1.7.2-5/debian/rules |
Property changes: |
Deleted: svn:executable |
## -1 +0,0 ## |
-* |
\ No newline at end of property |
Index: tags/1.7.2-5/debian/source/format |
=================================================================== |
--- tags/1.7.2-5/debian/source/format (revision 33) |
+++ tags/1.7.2-5/debian/source/format (nonexistent) |
@@ -1 +0,0 @@ |
-3.0 (quilt) |
Index: tags/1.7.2-5/debian/control |
=================================================================== |
--- tags/1.7.2-5/debian/control (revision 33) |
+++ tags/1.7.2-5/debian/control (nonexistent) |
@@ -1,19 +0,0 @@ |
-Source: x2vnc |
-Section: x11 |
-Priority: optional |
-Maintainer: Magnus Holmgren <holmgren@debian.org> |
-Standards-Version: 3.9.3 |
-Build-Depends: dpkg-dev (>= 1.15.7), debhelper (>= 6), libxaw7-dev, |
- xutils-dev, libx11-dev, libxinerama-dev, libxss-dev |
-Homepage: http://fredrik.hubbe.net/x2vnc.html |
- |
-Package: x2vnc |
-Architecture: any |
-Depends: ${shlibs:Depends}, ${misc:Depends} |
-Suggests: vnc4server, xvnc4viewer, tightvncserver, xtightvncviewer |
-Description: Link a VNC and an X display together, simulating a multiheaded display |
- This program merges the capabilities of x2x and vncviewer. It will allow a |
- machine with an X display and a machine with a VNC server running on its main |
- screen to act as if they were two displays connected to one machine. When you |
- move your mouse pointer off the screen in a direction of your choosing, the |
- pointer will appear on the other screen instead. |
Index: tags/1.7.2-5/debian/compat |
=================================================================== |
--- tags/1.7.2-5/debian/compat (revision 33) |
+++ tags/1.7.2-5/debian/compat (nonexistent) |
@@ -1 +0,0 @@ |
-6 |
Index: tags/1.7.2-5/debian/watch |
=================================================================== |
--- tags/1.7.2-5/debian/watch (revision 33) |
+++ tags/1.7.2-5/debian/watch (nonexistent) |
@@ -1,2 +0,0 @@ |
-version=3 |
-http://fredrik.hubbe.net/x2vnc.html x2vnc/x2vnc-(.*?)\.tar\.gz |
Index: tags/1.7.2-5/debian |
=================================================================== |
--- tags/1.7.2-5/debian (revision 33) |
+++ tags/1.7.2-5/debian (nonexistent) |
/tags/1.7.2-5/debian |
Property changes: |
Deleted: mergeWithUpstream |
## -1 +0,0 ## |
-1 |
\ No newline at end of property |
Index: tags/1.7.2-2/x2vnc.man |
=================================================================== |
--- tags/1.7.2-2/x2vnc.man (revision 33) |
+++ tags/1.7.2-2/x2vnc.man (nonexistent) |
@@ -1,285 +0,0 @@ |
-.TH x2vnc 1 |
-.SH NAME |
-x2vnc \- a dual-screen hack |
- |
-.SH SYNOPSIS |
-.B x2vnc |
-.I <options> |
-.I <host>:<display#> |
-.br |
-.B x2vnc |
-.I <options> |
-.I -listen |
-.I [<display#>] |
-.br |
-[ |
-.B \-display |
-.I display |
-] |
-.br |
-[ |
-.B -version |
-] |
-.br |
-[ |
-.B -shared |
-] |
-.br |
-[ |
-.B -north |
-] [ |
-.B -south |
-] [ |
-.B -east |
-] [ |
-.B -west |
-] |
-.br |
-[ |
-.B -hotkey |
-.I key |
-] |
-.br |
-[ |
-.B -passwdfile |
-.I passwd-file |
-] |
-.br |
-[ |
-.B -resurface |
-] |
-.br |
-[ |
-.B -edgewidth |
-.I width |
-] |
-.br |
-[ |
-.B -desktop |
-.I desktop-number |
-] |
-.br |
-[ |
-.B -timeout |
-.I seconds |
-] |
-.br |
-[ |
-.B -wheelhack |
-] |
-.br |
-[ |
-.B -nowheel |
-] |
-.br |
-[ |
-.B -reversewheel |
-] |
-.br |
-[ |
-.B -scrolllines |
-.I lines |
-] |
-.br |
-[ |
-.B -navhack |
-] |
-.br |
-[ |
-.B -mac |
-] |
-.br |
-[ |
-.B -trimsel |
-] |
-.br |
-[ |
-.B -noblank |
-] |
-.br |
-[ |
-.B -lockdelay |
-.I seconds |
-] |
-.br |
-[ |
-.B -debug |
-] |
-.br |
-[ |
-.B -accel |
-.I multiplier |
-] |
-.br |
-[ |
-.B -noreconnect |
-] |
-.br |
-[ |
-.B -tunnel |
-] |
-.br |
-[ |
-.B -via |
-.I host |
-] |
-.SH DESCRIPTION |
-.I x2vnc |
-will let you use two screens on two different computers as if they were |
-connected to the same computer. The computer with the 'main' keyboard must |
-be running X-window, and the second computer should have a VNC server |
-running which will update the contents on the actual screen. This means |
-\fIXvnc\fR is not suitable, but \fIWinVNC\fR is. |
- |
-In listen mode ( |
-.B -listen |
-option specified ) |
-.I x2vnc |
-will wait for a connection from a VNC server on ports 5400 and 5500 (plus |
-the optional |
-.I display# |
-value) instead of connecting to a specified VNC server. |
- |
-For up-to-date information on x2vnc, see the x2vnc home page: |
-.B http://fredrik.hubbe.net/x2vnc.html |
- |
-.TP |
-\fB\-display\fR \fIdisplay\fR |
-The X windows display to connect from. |
-.TP |
-\fB\-shared\fR |
-Allow multiple connections to the same VNC server. |
-.TP |
-\fB\-north\fR, \fB\-south\fR, \fB\-east\fR, \fB\-west\fR, |
-Determine which edge leads to the other screen. |
-.TP |
-\fB\-passwdfile\fR \fIpassword-file\fR |
-With this option you can start x2vnc without entering a password. The file is |
-created by \fBvncpasswd\fR which comes with the X-windows VNC software. |
-If the file does not exist, \fIx2vnc\fR will ask for a password and |
-create the file. |
-.TP |
-\fB\-resurface\fR |
-This option will cause the trigger window to re-surface automatically if it is |
-covered up by another window. |
-.TP |
-\fB\-hotkey\fR \fIkey\fR |
-This option allows you to select which key to use to warp the pointer |
-to and from second computer. The default is "Control-F12", any |
-combination of modifiers can be used, such as "shift-alt-meta-ctrl-F1" |
-(or s-a-m-c-F1). |
-.TP |
-\fB\-edgewidth\fR \fIpixels\fR |
-This is a workaround for some X servers which do not allow the mouse to |
-go all the way to the edge of the screen. By setting this to 2 or greater, the |
-mouse will be able to reach the x2vnc window and thus warp to the |
-windows machine. The default value is 1. If you set this value to 0, |
-no border will be generated, which means you will have to use hotkeys |
-to switch to the oher screen. |
-.TP |
-\fB\-desktop\fR \fIdesktop-number\fR |
-With this option, you can make x2vnc non-sticky. This may not work |
-with all window-managers. Note that the first desktop is usually |
-0 (zero). If you want x2vnc to appear on the last (rightmost) desktop, |
-use -1. This option was especially created with the sawfish edgeflipping |
-in mind, normally you would use "-west -desktop 0" or "-east -destkop -1" |
-with Sawfish to allow edgeflipping to work normally. |
-.TP |
-\fB\-timeout\fR \fIseconds\fR |
-This options tells x2vnc how long to wait before warping the cursor back |
-to the X screen if there is no activity. The reason for this is that |
-some screen savers, such as xscreensaver, cannot activate while x2vnc is |
-in control of the cursor. The default value is 590 seconds, which is |
-equivalent to 9 minutes and 50 seconds. Using a value of 0 will disable |
-timeouts completely. |
-.TP |
-\fB\-nowheel\fR |
-This option does nothing and is left for backwards compatibility only. |
-.TP |
-\fB\-wheelhack\fR |
-This will make x2vnc tranlate all mouse wheel events into arrow up/down |
-events. Only use this if your VNC server doesn't understand mouse wheel |
-events. |
-.TP |
-\fB\-reversewheel\fR |
-Invert the up/down direction of the mouse wheel emulation. |
-This option only works if -wheelhack is used. |
-.TP |
-\fB\-scrolllines\fR \fIlines\fR |
-When using mouse wheel emulation, this selects how many up/down |
-events will be sent for each tick of the mouse wheel. |
-.TP |
-\fB\-navhack\fR |
-This will map button 6 & 7 to Alt+Left/Right, which will allow the |
-navigation buttons on some mice to behave more like they do in windows. |
-.TP |
-\fB\-mac\fR |
-Macintosh specific mode, maps second mouse button to control-mouseclick. |
-.TP |
-\fB\-trimsel\fR |
-If the X selection looks like a URL, trim leading and trailing spaces. |
-This can be useful for pasting URLs into a browser. |
-.TP |
-\fB\-noblank\fR |
-Prevent screen blanking on the remote desktop while you are working |
-on the local desktop. Requires the MIT-SCREEN-SAVER or XIDLE extension |
-to work properly. If neither of these extensions are present, the |
-remote desktop will always be kept from blanking. |
-.TP |
-\fB\-lockdelay\fR \fIseconds\fR |
-This is only meaningful when using the -noblank option. When this |
-option is present. With this option, x2vnc will not attempt to |
-wake up the remote screen if you have been idle for more than |
-the specified amount of time. This is useful if you need a password |
-to unlock the remote screen and would rather leave it blanked until |
-you need it. |
-.TP |
-\fB\-debug\fR |
-This option will make x2vnc print out information about events it |
-sends and receives to stderr for debugging purposes. |
-.TP |
-\fB\-accel\fR \fImultiplier\fR |
-This option allows you to control the speed of the mouse on the |
-remote screen. 2.0 means twice as fast, 0.5 means half as fast. |
-Default is 1.0. Note that this is multiplied with a number which |
-x2vnc calculates based on screen sizes and other factors. |
-.TP |
-\fB\-noreconnect\fR |
-This option prevents x2vnc from automatically reconnecting if the |
-connection is closed. |
-.TP |
-\fB\-tunnel\fR |
-This option makes x2vnc start an SSH tunnel to the machine being |
-controlled by x2vnc. The SSH command used can be changed by setting |
-the X2VNC_SSH_CMD environment variable. The default is: |
-.br |
-\fBssh -A -X -f -L "$LOCALPORT:$REMOTEHOST:$REMOTEPORT" \\ |
-.br |
-"$GATEWAYHOST" 'ssh-add;sleep 60'\fR |
-.TP |
-\fB\-via\fR \fIhost\fR |
-This is similar to -tunnel, but tunnels through a host different than |
-the machine being controlled by x2vnc. |
- |
- |
-.SH EXAMPLES |
-Most common usage: |
-.br |
-\fBx2vnc -passwdfile $HOME/.vncpasswd -resurface host:0\fR |
- |
-To make x2vnc start (and re-start) automatically, add the following to |
-your your X startup file (usually .xinitrc): |
-.br |
-\fB |
-while :; |
-.br |
-do |
- x2vnc -passwd $HOME/.vncpasswd -resurface host:0 |
-.br |
- sleep 2 |
-.br |
-done |
-\fR |
- |
-.SH AUTHOR |
-Fredrik Hübinette, hubbe@hubbe.net |
Index: tags/1.7.2-2/debian/copyright |
=================================================================== |
--- tags/1.7.2-2/debian/copyright (revision 33) |
+++ tags/1.7.2-2/debian/copyright (nonexistent) |
@@ -1,27 +0,0 @@ |
-x2vnc was Written by Fredrik Hübinette <hubbe@hubbe.net> |
-Based on ideas from x2x and code from vncviewer. |
- |
-It was packaged for use with Debian GNU/Linux by |
-Edward Betts <edward@debian.org> |
- |
-The x2vnc-wheel-patch was applied by the new maintainer Ola Lundqvist |
-<opal@debian.org>. This patch was written by bryan d. berg <km@underworld.net> |
-and found on freshmeat: http://freshmeat.net/projects/x2vnc-wheel-patch/ |
- |
-The latest version of this program should be available from |
- |
- http://fredrik.hubbe.net/x2vnc.html |
- |
-For more info about VNC: http://www.uk.research.att.com/vnc/ |
-For more info about x2x: http://ftp.digital.com/pub/Digital/SRC/x2x/ |
- |
-The code is: |
-Copyright (C) 1997, 1998 Olivetti & Oracle Research Laboratory |
- |
-This is free software; you can redistribute it and/or modify |
-it under the terms of the GNU General Public License as published by |
-the Free Software Foundation; either version 2 of the License, or |
-(at your option) any later version. |
- |
-On Debian GNU/Linux systems, the complete text of the GNU General |
-Public License can be found in `/usr/share/common-licenses/GPL'. |
Index: tags/1.7.2-2/debian/docs |
=================================================================== |
--- tags/1.7.2-2/debian/docs (revision 33) |
+++ tags/1.7.2-2/debian/docs (nonexistent) |
@@ -1 +0,0 @@ |
-README |
Index: tags/1.7.2-2/debian/rules |
=================================================================== |
--- tags/1.7.2-2/debian/rules (revision 33) |
+++ tags/1.7.2-2/debian/rules (nonexistent) |
@@ -1,64 +0,0 @@ |
-#!/usr/bin/make -f |
-# debian/rules for freesweep |
-# modifications by Edward Betts <edward@debian.org> |
-# Based on: |
-# Sample debian/rules that uses debhelper. |
-# GNU copyright 1997 to 1999 by Joey Hess. |
- |
-# Uncomment this to turn on verbose mode. |
-#export DH_VERBOSE=1 |
- |
-# This has to be exported to make some magic below work. |
-export DH_OPTIONS |
- |
-build: build-stamp |
-build-stamp: |
- dh_testdir |
- |
- xmkmf |
- #$(MAKE) x2vnc |
- $(MAKE) |
- |
- touch build-stamp |
- |
-clean: |
- dh_testdir |
- dh_testroot |
- rm -f build-stamp |
- |
- [ ! -f Makefile ] || $(MAKE) distclean |
- |
- dh_clean |
- |
-install: build |
- dh_testdir |
- dh_testroot |
- dh_clean -k |
- |
- $(MAKE) DESTDIR=$(CURDIR)/debian/x2vnc MANSUFFIX=1 install |
- |
-# Build architecture-independent files here. |
-binary-indep: |
-# We have nothing to do by default. |
- |
-# Build architecture-dependent files here. |
-binary-arch: build install |
- dh_testdir |
- dh_testroot |
- dh_installdocs |
- dh_installexamples |
- dh_installmenu |
-# dh_installmanpages |
- dh_installchangelogs |
- dh_link |
- dh_strip |
- dh_compress |
- dh_fixperms |
- dh_installdeb |
- dh_shlibdeps |
- dh_gencontrol |
- dh_md5sums |
- dh_builddeb |
- |
-binary: binary-indep binary-arch |
-.PHONY: build clean binary-indep binary-arch binary install |
/tags/1.7.2-2/debian/rules |
Property changes: |
Deleted: svn:executable |
## -1 +0,0 ## |
-* |
\ No newline at end of property |
Index: tags/1.7.2-2/debian/control |
=================================================================== |
--- tags/1.7.2-2/debian/control (revision 33) |
+++ tags/1.7.2-2/debian/control (nonexistent) |
@@ -1,18 +0,0 @@ |
-Source: x2vnc |
-Section: x11 |
-Priority: optional |
-Maintainer: Magnus Holmgren <holmgren@debian.org> |
-Standards-Version: 3.9.1 |
-Build-Depends: debhelper (>= 6), libxaw7-dev, xutils-dev, libx11-dev, libxinerama-dev, libxss-dev |
-Homepage: http://fredrik.hubbe.net/x2vnc.html |
- |
-Package: x2vnc |
-Architecture: any |
-Depends: ${shlibs:Depends}, ${misc:Depends} |
-Suggests: vnc4server, xvnc4viewer, tightvncserver, xtightvncviewer |
-Description: A dual-screen hack - link an MS-Windows and X display |
- This program merges the capabilities of x2x and vncviewer. It will allow a |
- machine with an X display and a machine with a VNC server running on its main |
- screen to act as if they were two displays connected to one machine. When you |
- move your mouse pointer off the screen in a direction of your choosing, the |
- pointer will appear on the other screen instead. |
Index: tags/1.7.2-2/debian/compat |
=================================================================== |
--- tags/1.7.2-2/debian/compat (revision 33) |
+++ tags/1.7.2-2/debian/compat (nonexistent) |
@@ -1 +0,0 @@ |
-6 |
Index: tags/1.7.2-2/debian/watch |
=================================================================== |
--- tags/1.7.2-2/debian/watch (revision 33) |
+++ tags/1.7.2-2/debian/watch (nonexistent) |
@@ -1,2 +0,0 @@ |
-version=3 |
-http://fredrik.hubbe.net/x2vnc.html x2vnc/x2vnc-(.*?)\.tar\.gz |
Index: tags/1.7.2-2/debian/changelog |
=================================================================== |
--- tags/1.7.2-2/debian/changelog (revision 33) |
+++ tags/1.7.2-2/debian/changelog (nonexistent) |
@@ -1,237 +0,0 @@ |
-x2vnc (1.7.2-2) unstable; urgency=low |
- |
- * New maintainer (Closes: #586422). |
- * Acknowledge NMU. |
- * debian/watch: Fix URL and regexp. |
- * Remove stale and commented-out references to /usr/X11R6 in |
- debian/rules. Delete debian/dirs altogether and drop the call to |
- dh_installdirs. Also clean out irrelevant, commented-out Debhelper |
- commands. |
- * Make the version in the debhelper build dependency match |
- debian/compat. |
- * Bump Standards-Version to 3.9.1 (from 3.6.2). |
- * A few minor style changes in debian/rules. |
- * debian/copyright: Remove outdated info on changes made to the upstream |
- source as well as current version, and update URL to upstream webpage. |
- |
- -- Magnus Holmgren <holmgren@debian.org> Thu, 05 Aug 2010 10:34:21 +0200 |
- |
-x2vnc (1.7.2-1.1) unstable; urgency=low |
- |
- * Non-maintainer upload. |
- * Correct build dependencies (Closes: #485529, #515411) |
- * Fix and upgrade watch file (Closes: #529147) |
- * Don't set DH_COMPAT in rules |
- * Don't ignore errors by make clean |
- * Bump compat level to six |
- * Convert the copyright file to UTF-8 |
- |
- -- Raphael Geissert <geissert@debian.org> Wed, 08 Jul 2009 15:31:37 -0500 |
- |
-x2vnc (1.7.2-1) unstable; urgency=low |
- |
- * New upstream release. |
- Closes: #466290. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 25 Mar 2008 10:45:34 +0100 |
- |
-x2vnc (1.7.1-3) unstable; urgency=low |
- |
- * Removed build dependency on libvncauth-dev. |
- * Removed suggests on vnc-common. Instead suggest vncservers and vncviewers. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 4 Mar 2008 18:38:58 +0100 |
- |
-x2vnc (1.7.1-2) unstable; urgency=low |
- |
- * Made sure that it can compile even if the install target point it to |
- correct place, closes: #368506. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 29 May 2006 22:12:45 +0200 |
- |
-x2vnc (1.7.1-1) unstable; urgency=low |
- |
- * New upstream release. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 22 May 2006 20:03:23 +0200 |
- |
-x2vnc (1.6.1-1) unstable; urgency=low |
- |
- * New upstream release. |
- * Applied patch from Martin Dorey <martin.dorey@bluearc.com> to fix an |
- issue on amd64, closes: #343274. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 11 Mar 2006 17:30:13 +0100 |
- |
-x2vnc (1.6-4) unstable; urgency=low |
- |
- * Maintainer upload, closes: #349108, #346786. |
- * Fixed typo in description, closes: #300047. |
- * Updated standards version to 3.6.2. |
- * Added listen option to manpage, closes: #317148. |
- Thanks to Rob Sims <debbugs-z@robsims.com> for the patch. |
- * Moved to debhelper 2 compatibility. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 29 Jan 2006 15:06:35 +0100 |
- |
-x2vnc (1.6-3.1) unstable; urgency=low |
- |
- * Non-maintainer upload. |
- * Replace build-dependency on xlibs-dev with an explicit build-dependency |
- on each required package. (Closes: #346786) |
- |
- -- Steinar H. Gunderson <sesse@debian.org> Sat, 21 Jan 2006 02:18:10 +0100 |
- |
-x2vnc (1.6-3) unstable; urgency=low |
- |
- * Fixed package description, closes: #268549, #277241. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 25 Dec 2004 21:55:57 +0100 |
- |
-x2vnc (1.6-2) unstable; urgency=low |
- |
- * Patched to make cut and paste work in KDE apps, closes: #191697. |
- Thanks to "Martin Dorey" <mdorey@bluearc.com> for the patch. |
- * Moved from /usr/X11R6 to /usr. |
- * Fixed manpage section error, 1x != x. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 26 Aug 2004 18:32:37 +0200 |
- |
-x2vnc (1.6-1) unstable; urgency=low |
- |
- * New upstream release, closes: #233620. |
- This also fix a cut-and-paste bug, closes: #191697. |
- * Updated standards version to 3.6.1. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 28 Jul 2004 19:07:44 +0200 |
- |
-x2vnc (1.5.1-2) unstable; urgency=low |
- |
- * Added build dependency on xlibs-dev, closes: #238618. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 20 Mar 2004 15:28:27 +0100 |
- |
-x2vnc (1.5.1-1) unstable; urgency=low |
- |
- * New upstream version, closes: #205131, #160333, #206418. |
- * Updated standards version from 3.5.2 to 2.5.10. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 31 Aug 2003 15:59:27 +0200 |
- |
-x2vnc (1.4-2) unstable; urgency=low |
- |
- * Changed from xlib6g-dev to libxaw7-dev, closes: #170180. |
- |
- -- Ola Lundqvist <opal@debian.org> Fri, 22 Nov 2002 08:26:03 +0100 |
- |
-x2vnc (1.4-1) unstable; urgency=low |
- |
- * New upstream version, closes: #148341. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 29 Aug 2002 07:27:49 +0200 |
- |
-x2vnc (1.3-1) unstable; urgency=low |
- |
- * New upstream version, closes: #123688, #120473. |
- * Updated standards version. |
- * Removed depricated dh_testversion. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 3 Apr 2002 22:37:07 +0200 |
- |
-x2vnc (1.2-2) unstable; urgency=low |
- |
- * The upstream wheel patch scrolled up when scrolling down and |
- vice vera. Fixed with patch by Evan Martin <eeyem@u.washington.edu>, |
- closes: #90142. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 19 Mar 2001 22:13:32 +0100 |
- |
-x2vnc (1.2-1) unstable; urgency=low |
- |
- * New upstream version with mouse wheel support built in. Hope that |
- it works equally good or better than the patches I have applied. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 14 Mar 2001 15:45:35 +0100 |
- |
-x2vnc (1.1-6) unstable; urgency=low |
- |
- * Added a patch from Evan Martin <eeyem@u.washington.edu> that fixes |
- issues with the wheel patch, closes: Bug#88716. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 22 Feb 2001 22:44:12 +0100 |
- |
-x2vnc (1.1-5) unstable; urgency=low |
- |
- * Added xutils to build depends, closes: Bug#86586. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 22 Feb 2001 22:44:12 +0100 |
- |
-x2vnc (1.1-4) unstable; urgency=low |
- |
- * Added suggestion of vnc-common, closes: Bug#81576. |
- |
- -- Ola Lundqvist <opal@debian.org> Fri, 2 Feb 2001 13:03:46 +0100 |
- |
-x2vnc (1.1-3) unstable; urgency=low |
- |
- * Readded dh_testversion and added a versioned debhelper dependency in the |
- control file as it really should be, closes: Bug#78573. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 3 Dec 2000 23:40:34 +0100 |
- |
-x2vnc (1.1-2) unstable; urgency=low |
- |
- * Recompiled to indicate new maintainer and to make sure that it |
- works with the new c library. |
- * Have also applied the x2vnc-wheel-patch (found on freshmeat). |
- * Removed dh_testversion that lintian complains about from the |
- debian/rules file. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 21 Nov 2000 23:16:10 +0100 |
- |
-x2vnc (1.1-1) unstable; urgency=low |
- |
- * New upstream release |
- |
- -- Edward Betts <edward@debian.org> Sun, 21 May 2000 13:10:44 +0100 |
- |
-x2vnc (1.0-5) unstable; urgency=low |
- |
- * Imakefile: modified to compile against libvncauth0 |
- * debian/control: updateded Standards-Version to 3.1.1 |
- * debian/control: added Build-Depends. |
- * debian/rules: rewritten. |
- * debian/rules: added xmkmf. |
- |
- -- Edward Betts <edward@debian.org> Thu, 6 Jan 2000 23:59:45 +0000 |
- |
-x2vnc (1.0-4) unstable; urgency=low |
- |
- * Changed to Debhelper 2.0 |
- * Updated Standards-Version: 3.0.1 |
- * Lintian clean |
- * Changed location of GPL to /usr/share/common-licenses/GPL |
- |
- -- Edward Betts <edward@debian.org> Sun, 12 Sep 1999 12:01:26 +0100 |
- |
-x2vnc (1.0-3) unstable; urgency=low |
- |
- * Corrected spelling of maintainers name in control (oops!) |
- * Passes Lintian v0.9.5 |
- |
- -- Edward Betts <edward@debian.org> Sun, 12 Sep 1999 12:01:15 +0100 |
- |
-x2vnc (1.0-2) unstable; urgency=low |
- |
- * Improve man page |
- * Fixed source packaging - now includes pristine source |
- |
- -- Edward Betts <edward@debian.org> Sun, 6 Dec 1998 11:44:48 +0000 |
- |
-x2vnc (1.0-1) unstable; urgency=low |
- |
- * Initial Release |
- * Wrote a man page for x2vnc |
- * Passes Lintian v0.9.4 |
- |
- -- Edward Betts <edward@debian.org> Fri, 4 Dec 1998 14:25:08 +0000 |
Index: tags/1.7.2-2/debian |
=================================================================== |
--- tags/1.7.2-2/debian (revision 33) |
+++ tags/1.7.2-2/debian (nonexistent) |
/tags/1.7.2-2/debian |
Property changes: |
Deleted: mergeWithUpstream |
## -1 +0,0 ## |
-1 |
\ No newline at end of property |
Index: tags/1.7.2-3/x2vnc.man |
=================================================================== |
--- tags/1.7.2-3/x2vnc.man (revision 33) |
+++ tags/1.7.2-3/x2vnc.man (nonexistent) |
@@ -1,285 +0,0 @@ |
-.TH x2vnc 1 |
-.SH NAME |
-x2vnc \- a dual-screen hack |
- |
-.SH SYNOPSIS |
-.B x2vnc |
-.I <options> |
-.I <host>:<display#> |
-.br |
-.B x2vnc |
-.I <options> |
-.I -listen |
-.I [<display#>] |
-.br |
-[ |
-.B \-display |
-.I display |
-] |
-.br |
-[ |
-.B -version |
-] |
-.br |
-[ |
-.B -shared |
-] |
-.br |
-[ |
-.B -north |
-] [ |
-.B -south |
-] [ |
-.B -east |
-] [ |
-.B -west |
-] |
-.br |
-[ |
-.B -hotkey |
-.I key |
-] |
-.br |
-[ |
-.B -passwdfile |
-.I passwd-file |
-] |
-.br |
-[ |
-.B -resurface |
-] |
-.br |
-[ |
-.B -edgewidth |
-.I width |
-] |
-.br |
-[ |
-.B -desktop |
-.I desktop-number |
-] |
-.br |
-[ |
-.B -timeout |
-.I seconds |
-] |
-.br |
-[ |
-.B -wheelhack |
-] |
-.br |
-[ |
-.B -nowheel |
-] |
-.br |
-[ |
-.B -reversewheel |
-] |
-.br |
-[ |
-.B -scrolllines |
-.I lines |
-] |
-.br |
-[ |
-.B -navhack |
-] |
-.br |
-[ |
-.B -mac |
-] |
-.br |
-[ |
-.B -trimsel |
-] |
-.br |
-[ |
-.B -noblank |
-] |
-.br |
-[ |
-.B -lockdelay |
-.I seconds |
-] |
-.br |
-[ |
-.B -debug |
-] |
-.br |
-[ |
-.B -accel |
-.I multiplier |
-] |
-.br |
-[ |
-.B -noreconnect |
-] |
-.br |
-[ |
-.B -tunnel |
-] |
-.br |
-[ |
-.B -via |
-.I host |
-] |
-.SH DESCRIPTION |
-.I x2vnc |
-will let you use two screens on two different computers as if they were |
-connected to the same computer. The computer with the 'main' keyboard must |
-be running X-window, and the second computer should have a VNC server |
-running which will update the contents on the actual screen. This means |
-\fIXvnc\fR is not suitable, but \fIWinVNC\fR is. |
- |
-In listen mode ( |
-.B -listen |
-option specified ) |
-.I x2vnc |
-will wait for a connection from a VNC server on ports 5400 and 5500 (plus |
-the optional |
-.I display# |
-value) instead of connecting to a specified VNC server. |
- |
-For up-to-date information on x2vnc, see the x2vnc home page: |
-.B http://fredrik.hubbe.net/x2vnc.html |
- |
-.TP |
-\fB\-display\fR \fIdisplay\fR |
-The X windows display to connect from. |
-.TP |
-\fB\-shared\fR |
-Allow multiple connections to the same VNC server. |
-.TP |
-\fB\-north\fR, \fB\-south\fR, \fB\-east\fR, \fB\-west\fR, |
-Determine which edge leads to the other screen. |
-.TP |
-\fB\-passwdfile\fR \fIpassword-file\fR |
-With this option you can start x2vnc without entering a password. The file is |
-created by \fBvncpasswd\fR which comes with the X-windows VNC software. |
-If the file does not exist, \fIx2vnc\fR will ask for a password and |
-create the file. |
-.TP |
-\fB\-resurface\fR |
-This option will cause the trigger window to re-surface automatically if it is |
-covered up by another window. |
-.TP |
-\fB\-hotkey\fR \fIkey\fR |
-This option allows you to select which key to use to warp the pointer |
-to and from second computer. The default is "Control-F12", any |
-combination of modifiers can be used, such as "shift-alt-meta-ctrl-F1" |
-(or s-a-m-c-F1). |
-.TP |
-\fB\-edgewidth\fR \fIpixels\fR |
-This is a workaround for some X servers which do not allow the mouse to |
-go all the way to the edge of the screen. By setting this to 2 or greater, the |
-mouse will be able to reach the x2vnc window and thus warp to the |
-windows machine. The default value is 1. If you set this value to 0, |
-no border will be generated, which means you will have to use hotkeys |
-to switch to the oher screen. |
-.TP |
-\fB\-desktop\fR \fIdesktop-number\fR |
-With this option, you can make x2vnc non-sticky. This may not work |
-with all window-managers. Note that the first desktop is usually |
-0 (zero). If you want x2vnc to appear on the last (rightmost) desktop, |
-use -1. This option was especially created with the sawfish edgeflipping |
-in mind, normally you would use "-west -desktop 0" or "-east -destkop -1" |
-with Sawfish to allow edgeflipping to work normally. |
-.TP |
-\fB\-timeout\fR \fIseconds\fR |
-This options tells x2vnc how long to wait before warping the cursor back |
-to the X screen if there is no activity. The reason for this is that |
-some screen savers, such as xscreensaver, cannot activate while x2vnc is |
-in control of the cursor. The default value is 590 seconds, which is |
-equivalent to 9 minutes and 50 seconds. Using a value of 0 will disable |
-timeouts completely. |
-.TP |
-\fB\-nowheel\fR |
-This option does nothing and is left for backwards compatibility only. |
-.TP |
-\fB\-wheelhack\fR |
-This will make x2vnc tranlate all mouse wheel events into arrow up/down |
-events. Only use this if your VNC server doesn't understand mouse wheel |
-events. |
-.TP |
-\fB\-reversewheel\fR |
-Invert the up/down direction of the mouse wheel emulation. |
-This option only works if -wheelhack is used. |
-.TP |
-\fB\-scrolllines\fR \fIlines\fR |
-When using mouse wheel emulation, this selects how many up/down |
-events will be sent for each tick of the mouse wheel. |
-.TP |
-\fB\-navhack\fR |
-This will map button 6 & 7 to Alt+Left/Right, which will allow the |
-navigation buttons on some mice to behave more like they do in windows. |
-.TP |
-\fB\-mac\fR |
-Macintosh specific mode, maps second mouse button to control-mouseclick. |
-.TP |
-\fB\-trimsel\fR |
-If the X selection looks like a URL, trim leading and trailing spaces. |
-This can be useful for pasting URLs into a browser. |
-.TP |
-\fB\-noblank\fR |
-Prevent screen blanking on the remote desktop while you are working |
-on the local desktop. Requires the MIT-SCREEN-SAVER or XIDLE extension |
-to work properly. If neither of these extensions are present, the |
-remote desktop will always be kept from blanking. |
-.TP |
-\fB\-lockdelay\fR \fIseconds\fR |
-This is only meaningful when using the -noblank option. When this |
-option is present. With this option, x2vnc will not attempt to |
-wake up the remote screen if you have been idle for more than |
-the specified amount of time. This is useful if you need a password |
-to unlock the remote screen and would rather leave it blanked until |
-you need it. |
-.TP |
-\fB\-debug\fR |
-This option will make x2vnc print out information about events it |
-sends and receives to stderr for debugging purposes. |
-.TP |
-\fB\-accel\fR \fImultiplier\fR |
-This option allows you to control the speed of the mouse on the |
-remote screen. 2.0 means twice as fast, 0.5 means half as fast. |
-Default is 1.0. Note that this is multiplied with a number which |
-x2vnc calculates based on screen sizes and other factors. |
-.TP |
-\fB\-noreconnect\fR |
-This option prevents x2vnc from automatically reconnecting if the |
-connection is closed. |
-.TP |
-\fB\-tunnel\fR |
-This option makes x2vnc start an SSH tunnel to the machine being |
-controlled by x2vnc. The SSH command used can be changed by setting |
-the X2VNC_SSH_CMD environment variable. The default is: |
-.br |
-\fBssh -A -X -f -L "$LOCALPORT:$REMOTEHOST:$REMOTEPORT" \\ |
-.br |
-"$GATEWAYHOST" 'ssh-add;sleep 60'\fR |
-.TP |
-\fB\-via\fR \fIhost\fR |
-This is similar to -tunnel, but tunnels through a host different than |
-the machine being controlled by x2vnc. |
- |
- |
-.SH EXAMPLES |
-Most common usage: |
-.br |
-\fBx2vnc -passwdfile $HOME/.vncpasswd -resurface host:0\fR |
- |
-To make x2vnc start (and re-start) automatically, add the following to |
-your your X startup file (usually .xinitrc): |
-.br |
-\fB |
-while :; |
-.br |
-do |
- x2vnc -passwd $HOME/.vncpasswd -resurface host:0 |
-.br |
- sleep 2 |
-.br |
-done |
-\fR |
- |
-.SH AUTHOR |
-Fredrik Hübinette, hubbe@hubbe.net |
Index: tags/1.7.2-3/debian/compat |
=================================================================== |
--- tags/1.7.2-3/debian/compat (revision 33) |
+++ tags/1.7.2-3/debian/compat (nonexistent) |
@@ -1 +0,0 @@ |
-6 |
Index: tags/1.7.2-3/debian/watch |
=================================================================== |
--- tags/1.7.2-3/debian/watch (revision 33) |
+++ tags/1.7.2-3/debian/watch (nonexistent) |
@@ -1,2 +0,0 @@ |
-version=3 |
-http://fredrik.hubbe.net/x2vnc.html x2vnc/x2vnc-(.*?)\.tar\.gz |
Index: tags/1.7.2-3/debian/changelog |
=================================================================== |
--- tags/1.7.2-3/debian/changelog (revision 33) |
+++ tags/1.7.2-3/debian/changelog (nonexistent) |
@@ -1,247 +0,0 @@ |
-x2vnc (1.7.2-3) unstable; urgency=low |
- |
- * Switch to source format 3.0 (quilt). |
- * Switch from Imake to configure (enabling Xinerama). |
- * Add patch via Ubuntu that fixes a problem with the cursor not moving |
- to the remote screen when Xinerama support is enabled (Closes: |
- #616396; LP: #726783). Thanks to Will Shackleton. |
- |
- -- Magnus Holmgren <holmgren@debian.org> Sun, 06 Mar 2011 20:51:00 +0100 |
- |
-x2vnc (1.7.2-2) unstable; urgency=low |
- |
- * New maintainer (Closes: #586422). |
- * Acknowledge NMU. |
- * debian/watch: Fix URL and regexp. |
- * Remove stale and commented-out references to /usr/X11R6 in |
- debian/rules. Delete debian/dirs altogether and drop the call to |
- dh_installdirs. Also clean out irrelevant, commented-out Debhelper |
- commands. |
- * Make the version in the debhelper build dependency match |
- debian/compat. |
- * Bump Standards-Version to 3.9.1 (from 3.6.2). |
- * A few minor style changes in debian/rules. |
- * debian/copyright: Remove outdated info on changes made to the upstream |
- source as well as current version, and update URL to upstream webpage. |
- |
- -- Magnus Holmgren <holmgren@debian.org> Thu, 05 Aug 2010 10:34:21 +0200 |
- |
-x2vnc (1.7.2-1.1) unstable; urgency=low |
- |
- * Non-maintainer upload. |
- * Correct build dependencies (Closes: #485529, #515411) |
- * Fix and upgrade watch file (Closes: #529147) |
- * Don't set DH_COMPAT in rules |
- * Don't ignore errors by make clean |
- * Bump compat level to six |
- * Convert the copyright file to UTF-8 |
- |
- -- Raphael Geissert <geissert@debian.org> Wed, 08 Jul 2009 15:31:37 -0500 |
- |
-x2vnc (1.7.2-1) unstable; urgency=low |
- |
- * New upstream release. |
- Closes: #466290. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 25 Mar 2008 10:45:34 +0100 |
- |
-x2vnc (1.7.1-3) unstable; urgency=low |
- |
- * Removed build dependency on libvncauth-dev. |
- * Removed suggests on vnc-common. Instead suggest vncservers and vncviewers. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 4 Mar 2008 18:38:58 +0100 |
- |
-x2vnc (1.7.1-2) unstable; urgency=low |
- |
- * Made sure that it can compile even if the install target point it to |
- correct place, closes: #368506. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 29 May 2006 22:12:45 +0200 |
- |
-x2vnc (1.7.1-1) unstable; urgency=low |
- |
- * New upstream release. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 22 May 2006 20:03:23 +0200 |
- |
-x2vnc (1.6.1-1) unstable; urgency=low |
- |
- * New upstream release. |
- * Applied patch from Martin Dorey <martin.dorey@bluearc.com> to fix an |
- issue on amd64, closes: #343274. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 11 Mar 2006 17:30:13 +0100 |
- |
-x2vnc (1.6-4) unstable; urgency=low |
- |
- * Maintainer upload, closes: #349108, #346786. |
- * Fixed typo in description, closes: #300047. |
- * Updated standards version to 3.6.2. |
- * Added listen option to manpage, closes: #317148. |
- Thanks to Rob Sims <debbugs-z@robsims.com> for the patch. |
- * Moved to debhelper 2 compatibility. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 29 Jan 2006 15:06:35 +0100 |
- |
-x2vnc (1.6-3.1) unstable; urgency=low |
- |
- * Non-maintainer upload. |
- * Replace build-dependency on xlibs-dev with an explicit build-dependency |
- on each required package. (Closes: #346786) |
- |
- -- Steinar H. Gunderson <sesse@debian.org> Sat, 21 Jan 2006 02:18:10 +0100 |
- |
-x2vnc (1.6-3) unstable; urgency=low |
- |
- * Fixed package description, closes: #268549, #277241. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 25 Dec 2004 21:55:57 +0100 |
- |
-x2vnc (1.6-2) unstable; urgency=low |
- |
- * Patched to make cut and paste work in KDE apps, closes: #191697. |
- Thanks to "Martin Dorey" <mdorey@bluearc.com> for the patch. |
- * Moved from /usr/X11R6 to /usr. |
- * Fixed manpage section error, 1x != x. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 26 Aug 2004 18:32:37 +0200 |
- |
-x2vnc (1.6-1) unstable; urgency=low |
- |
- * New upstream release, closes: #233620. |
- This also fix a cut-and-paste bug, closes: #191697. |
- * Updated standards version to 3.6.1. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 28 Jul 2004 19:07:44 +0200 |
- |
-x2vnc (1.5.1-2) unstable; urgency=low |
- |
- * Added build dependency on xlibs-dev, closes: #238618. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 20 Mar 2004 15:28:27 +0100 |
- |
-x2vnc (1.5.1-1) unstable; urgency=low |
- |
- * New upstream version, closes: #205131, #160333, #206418. |
- * Updated standards version from 3.5.2 to 2.5.10. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 31 Aug 2003 15:59:27 +0200 |
- |
-x2vnc (1.4-2) unstable; urgency=low |
- |
- * Changed from xlib6g-dev to libxaw7-dev, closes: #170180. |
- |
- -- Ola Lundqvist <opal@debian.org> Fri, 22 Nov 2002 08:26:03 +0100 |
- |
-x2vnc (1.4-1) unstable; urgency=low |
- |
- * New upstream version, closes: #148341. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 29 Aug 2002 07:27:49 +0200 |
- |
-x2vnc (1.3-1) unstable; urgency=low |
- |
- * New upstream version, closes: #123688, #120473. |
- * Updated standards version. |
- * Removed depricated dh_testversion. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 3 Apr 2002 22:37:07 +0200 |
- |
-x2vnc (1.2-2) unstable; urgency=low |
- |
- * The upstream wheel patch scrolled up when scrolling down and |
- vice vera. Fixed with patch by Evan Martin <eeyem@u.washington.edu>, |
- closes: #90142. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 19 Mar 2001 22:13:32 +0100 |
- |
-x2vnc (1.2-1) unstable; urgency=low |
- |
- * New upstream version with mouse wheel support built in. Hope that |
- it works equally good or better than the patches I have applied. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 14 Mar 2001 15:45:35 +0100 |
- |
-x2vnc (1.1-6) unstable; urgency=low |
- |
- * Added a patch from Evan Martin <eeyem@u.washington.edu> that fixes |
- issues with the wheel patch, closes: Bug#88716. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 22 Feb 2001 22:44:12 +0100 |
- |
-x2vnc (1.1-5) unstable; urgency=low |
- |
- * Added xutils to build depends, closes: Bug#86586. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 22 Feb 2001 22:44:12 +0100 |
- |
-x2vnc (1.1-4) unstable; urgency=low |
- |
- * Added suggestion of vnc-common, closes: Bug#81576. |
- |
- -- Ola Lundqvist <opal@debian.org> Fri, 2 Feb 2001 13:03:46 +0100 |
- |
-x2vnc (1.1-3) unstable; urgency=low |
- |
- * Readded dh_testversion and added a versioned debhelper dependency in the |
- control file as it really should be, closes: Bug#78573. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 3 Dec 2000 23:40:34 +0100 |
- |
-x2vnc (1.1-2) unstable; urgency=low |
- |
- * Recompiled to indicate new maintainer and to make sure that it |
- works with the new c library. |
- * Have also applied the x2vnc-wheel-patch (found on freshmeat). |
- * Removed dh_testversion that lintian complains about from the |
- debian/rules file. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 21 Nov 2000 23:16:10 +0100 |
- |
-x2vnc (1.1-1) unstable; urgency=low |
- |
- * New upstream release |
- |
- -- Edward Betts <edward@debian.org> Sun, 21 May 2000 13:10:44 +0100 |
- |
-x2vnc (1.0-5) unstable; urgency=low |
- |
- * Imakefile: modified to compile against libvncauth0 |
- * debian/control: updateded Standards-Version to 3.1.1 |
- * debian/control: added Build-Depends. |
- * debian/rules: rewritten. |
- * debian/rules: added xmkmf. |
- |
- -- Edward Betts <edward@debian.org> Thu, 6 Jan 2000 23:59:45 +0000 |
- |
-x2vnc (1.0-4) unstable; urgency=low |
- |
- * Changed to Debhelper 2.0 |
- * Updated Standards-Version: 3.0.1 |
- * Lintian clean |
- * Changed location of GPL to /usr/share/common-licenses/GPL |
- |
- -- Edward Betts <edward@debian.org> Sun, 12 Sep 1999 12:01:26 +0100 |
- |
-x2vnc (1.0-3) unstable; urgency=low |
- |
- * Corrected spelling of maintainers name in control (oops!) |
- * Passes Lintian v0.9.5 |
- |
- -- Edward Betts <edward@debian.org> Sun, 12 Sep 1999 12:01:15 +0100 |
- |
-x2vnc (1.0-2) unstable; urgency=low |
- |
- * Improve man page |
- * Fixed source packaging - now includes pristine source |
- |
- -- Edward Betts <edward@debian.org> Sun, 6 Dec 1998 11:44:48 +0000 |
- |
-x2vnc (1.0-1) unstable; urgency=low |
- |
- * Initial Release |
- * Wrote a man page for x2vnc |
- * Passes Lintian v0.9.4 |
- |
- -- Edward Betts <edward@debian.org> Fri, 4 Dec 1998 14:25:08 +0000 |
Index: tags/1.7.2-3/debian/patches/multiscreen-cursor-stick.patch |
=================================================================== |
--- tags/1.7.2-3/debian/patches/multiscreen-cursor-stick.patch (revision 33) |
+++ tags/1.7.2-3/debian/patches/multiscreen-cursor-stick.patch (nonexistent) |
@@ -1,24 +0,0 @@ |
-Description: Fix a sticking cursor in a multi-screen configuration |
- When x2vnc is compiled with Xinerama support and runs with a multiscreen setup, |
- the cursor can become stuck on the border between the local and remote screens, |
- not moving further than the border, as it should do. |
-Author: Will Shackleton <w.shackleton@gmail.com> |
-Bug-Debian: http://bugs.debian.org/616396 |
-Bug-Ubuntu: https://launchpad.net/bugs/726783 |
-Forwarded: yes |
- |
---- a/x.c 2008-03-25 10:45:34 +0000 |
-+++ b/x.c 2011-03-03 23:34:29 +0000 |
-@@ -848,9 +848,9 @@ |
- { |
- int n,ret=a.x; |
- if(a.y < ret) ret=a.y; |
-- n=displayHeight - a.y; |
-+ n=y_offset + displayHeight - a.y; |
- if(n < ret) ret=n; |
-- n=displayWidth - a.x; |
-+ n=x_offset + displayWidth - a.x; |
- if(n < ret) ret=n; |
- return ret; |
- } |
- |
Index: tags/1.7.2-3/debian/patches/series |
=================================================================== |
--- tags/1.7.2-3/debian/patches/series (revision 33) |
+++ tags/1.7.2-3/debian/patches/series (nonexistent) |
@@ -1 +0,0 @@ |
-multiscreen-cursor-stick.patch |
Index: tags/1.7.2-3/debian/copyright |
=================================================================== |
--- tags/1.7.2-3/debian/copyright (revision 33) |
+++ tags/1.7.2-3/debian/copyright (nonexistent) |
@@ -1,27 +0,0 @@ |
-x2vnc was Written by Fredrik Hübinette <hubbe@hubbe.net> |
-Based on ideas from x2x and code from vncviewer. |
- |
-It was packaged for use with Debian GNU/Linux by |
-Edward Betts <edward@debian.org> |
- |
-The x2vnc-wheel-patch was applied by the new maintainer Ola Lundqvist |
-<opal@debian.org>. This patch was written by bryan d. berg <km@underworld.net> |
-and found on freshmeat: http://freshmeat.net/projects/x2vnc-wheel-patch/ |
- |
-The latest version of this program should be available from |
- |
- http://fredrik.hubbe.net/x2vnc.html |
- |
-For more info about VNC: http://www.uk.research.att.com/vnc/ |
-For more info about x2x: http://ftp.digital.com/pub/Digital/SRC/x2x/ |
- |
-The code is: |
-Copyright (C) 1997, 1998 Olivetti & Oracle Research Laboratory |
- |
-This is free software; you can redistribute it and/or modify |
-it under the terms of the GNU General Public License as published by |
-the Free Software Foundation; either version 2 of the License, or |
-(at your option) any later version. |
- |
-On Debian GNU/Linux systems, the complete text of the GNU General |
-Public License can be found in `/usr/share/common-licenses/GPL'. |
Index: tags/1.7.2-3/debian/docs |
=================================================================== |
--- tags/1.7.2-3/debian/docs (revision 33) |
+++ tags/1.7.2-3/debian/docs (nonexistent) |
@@ -1 +0,0 @@ |
-README |
Index: tags/1.7.2-3/debian/rules |
=================================================================== |
--- tags/1.7.2-3/debian/rules (revision 33) |
+++ tags/1.7.2-3/debian/rules (nonexistent) |
@@ -1,70 +0,0 @@ |
-#!/usr/bin/make -f |
-# debian/rules for freesweep |
-# modifications by Edward Betts <edward@debian.org> |
-# Based on: |
-# Sample debian/rules that uses debhelper. |
-# GNU copyright 1997 to 1999 by Joey Hess. |
- |
-# Uncomment this to turn on verbose mode. |
-#export DH_VERBOSE=1 |
- |
-# This has to be exported to make some magic below work. |
-export DH_OPTIONS |
- |
-config-stamp: configure |
- dh_testdir |
- ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \ |
- --prefix=/usr \ |
- --mandir=\$${prefix}/share/man |
- touch config-stamp |
- |
-build: build-stamp |
-build-stamp: config-stamp |
- dh_testdir |
- |
- $(MAKE) |
- |
- touch build-stamp |
- |
-clean: |
- dh_testdir |
- dh_testroot |
- rm -f build-stamp |
- |
- [ ! -f Makefile ] || $(MAKE) clean |
- |
- dh_clean config-stamp Makefile config.status config.log config.cache |
- |
-install: build |
- dh_testdir |
- dh_testroot |
- dh_clean -k |
- |
- install -m 755 -d $(CURDIR)/debian/x2vnc/usr/share |
- $(MAKE) DESTDIR=$(CURDIR)/debian/x2vnc install |
- |
-# Build architecture-independent files here. |
-binary-indep: |
-# We have nothing to do by default. |
- |
-# Build architecture-dependent files here. |
-binary-arch: build install |
- dh_testdir |
- dh_testroot |
- dh_installdocs |
- dh_installexamples |
- dh_installmenu |
-# dh_installmanpages |
- dh_installchangelogs |
- dh_link |
- dh_strip |
- dh_compress |
- dh_fixperms |
- dh_installdeb |
- dh_shlibdeps |
- dh_gencontrol |
- dh_md5sums |
- dh_builddeb |
- |
-binary: binary-indep binary-arch |
-.PHONY: build clean binary-indep binary-arch binary install |
/tags/1.7.2-3/debian/rules |
Property changes: |
Deleted: svn:executable |
## -1 +0,0 ## |
-* |
\ No newline at end of property |
Index: tags/1.7.2-3/debian/source/format |
=================================================================== |
--- tags/1.7.2-3/debian/source/format (revision 33) |
+++ tags/1.7.2-3/debian/source/format (nonexistent) |
@@ -1 +0,0 @@ |
-3.0 (quilt) |
Index: tags/1.7.2-3/debian/control |
=================================================================== |
--- tags/1.7.2-3/debian/control (revision 33) |
+++ tags/1.7.2-3/debian/control (nonexistent) |
@@ -1,18 +0,0 @@ |
-Source: x2vnc |
-Section: x11 |
-Priority: optional |
-Maintainer: Magnus Holmgren <holmgren@debian.org> |
-Standards-Version: 3.9.1 |
-Build-Depends: debhelper (>= 6), libxaw7-dev, xutils-dev, libx11-dev, libxinerama-dev, libxss-dev |
-Homepage: http://fredrik.hubbe.net/x2vnc.html |
- |
-Package: x2vnc |
-Architecture: any |
-Depends: ${shlibs:Depends}, ${misc:Depends} |
-Suggests: vnc4server, xvnc4viewer, tightvncserver, xtightvncviewer |
-Description: A dual-screen hack - link an MS-Windows and X display |
- This program merges the capabilities of x2x and vncviewer. It will allow a |
- machine with an X display and a machine with a VNC server running on its main |
- screen to act as if they were two displays connected to one machine. When you |
- move your mouse pointer off the screen in a direction of your choosing, the |
- pointer will appear on the other screen instead. |
Index: tags/1.7.2-3/debian |
=================================================================== |
--- tags/1.7.2-3/debian (revision 33) |
+++ tags/1.7.2-3/debian (nonexistent) |
/tags/1.7.2-3/debian |
Property changes: |
Deleted: mergeWithUpstream |
## -1 +0,0 ## |
-1 |
\ No newline at end of property |
Index: tags/1.7.2-4/debian/source/format |
=================================================================== |
--- tags/1.7.2-4/debian/source/format (revision 33) |
+++ tags/1.7.2-4/debian/source/format (nonexistent) |
@@ -1 +0,0 @@ |
-3.0 (quilt) |
Index: tags/1.7.2-4/debian/control |
=================================================================== |
--- tags/1.7.2-4/debian/control (revision 33) |
+++ tags/1.7.2-4/debian/control (nonexistent) |
@@ -1,19 +0,0 @@ |
-Source: x2vnc |
-Section: x11 |
-Priority: optional |
-Maintainer: Magnus Holmgren <holmgren@debian.org> |
-Standards-Version: 3.9.3 |
-Build-Depends: dpkg-dev (>= 1.15.7), debhelper (>= 6), libxaw7-dev, |
- xutils-dev, libx11-dev, libxinerama-dev, libxss-dev |
-Homepage: http://fredrik.hubbe.net/x2vnc.html |
- |
-Package: x2vnc |
-Architecture: any |
-Depends: ${shlibs:Depends}, ${misc:Depends} |
-Suggests: vnc4server, xvnc4viewer, tightvncserver, xtightvncviewer |
-Description: Link a VNC and and an X display together, simulating a multiheaded display |
- This program merges the capabilities of x2x and vncviewer. It will allow a |
- machine with an X display and a machine with a VNC server running on its main |
- screen to act as if they were two displays connected to one machine. When you |
- move your mouse pointer off the screen in a direction of your choosing, the |
- pointer will appear on the other screen instead. |
Index: tags/1.7.2-4/debian/compat |
=================================================================== |
--- tags/1.7.2-4/debian/compat (revision 33) |
+++ tags/1.7.2-4/debian/compat (nonexistent) |
@@ -1 +0,0 @@ |
-6 |
Index: tags/1.7.2-4/debian/watch |
=================================================================== |
--- tags/1.7.2-4/debian/watch (revision 33) |
+++ tags/1.7.2-4/debian/watch (nonexistent) |
@@ -1,2 +0,0 @@ |
-version=3 |
-http://fredrik.hubbe.net/x2vnc.html x2vnc/x2vnc-(.*?)\.tar\.gz |
Index: tags/1.7.2-4/debian/changelog |
=================================================================== |
--- tags/1.7.2-4/debian/changelog (revision 33) |
+++ tags/1.7.2-4/debian/changelog (nonexistent) |
@@ -1,260 +0,0 @@ |
-x2vnc (1.7.2-4) unstable; urgency=low |
- |
- * man-listen.patch: Create proper patch of "Added listen option to |
- manpage" from 1.6-4. |
- * format-security.patch (new): Fix incorrect use of fprintf() (it |
- probably wasn't too dangerous as it was only argv[0] that was used as |
- a format string). |
- * debian/rules: Use dpkg-architecture and dpkg-buildflags. |
- * debian/rules: Add build-arch and build-indep targets. |
- * Bump Standards-Version to 3.9.3. |
- |
- -- Magnus Holmgren <holmgren@debian.org> Sat, 23 Jun 2012 17:07:10 +0200 |
- |
-x2vnc (1.7.2-3) unstable; urgency=low |
- |
- * Switch to source format 3.0 (quilt). |
- * Switch from Imake to configure (enabling Xinerama). |
- * Add patch via Ubuntu that fixes a problem with the cursor not moving |
- to the remote screen when Xinerama support is enabled (Closes: |
- #616396; LP: #726783). Thanks to Will Shackleton. |
- |
- -- Magnus Holmgren <holmgren@debian.org> Sun, 06 Mar 2011 20:51:00 +0100 |
- |
-x2vnc (1.7.2-2) unstable; urgency=low |
- |
- * New maintainer (Closes: #586422). |
- * Acknowledge NMU. |
- * debian/watch: Fix URL and regexp. |
- * Remove stale and commented-out references to /usr/X11R6 in |
- debian/rules. Delete debian/dirs altogether and drop the call to |
- dh_installdirs. Also clean out irrelevant, commented-out Debhelper |
- commands. |
- * Make the version in the debhelper build dependency match |
- debian/compat. |
- * Bump Standards-Version to 3.9.1 (from 3.6.2). |
- * A few minor style changes in debian/rules. |
- * debian/copyright: Remove outdated info on changes made to the upstream |
- source as well as current version, and update URL to upstream webpage. |
- |
- -- Magnus Holmgren <holmgren@debian.org> Thu, 05 Aug 2010 10:34:21 +0200 |
- |
-x2vnc (1.7.2-1.1) unstable; urgency=low |
- |
- * Non-maintainer upload. |
- * Correct build dependencies (Closes: #485529, #515411) |
- * Fix and upgrade watch file (Closes: #529147) |
- * Don't set DH_COMPAT in rules |
- * Don't ignore errors by make clean |
- * Bump compat level to six |
- * Convert the copyright file to UTF-8 |
- |
- -- Raphael Geissert <geissert@debian.org> Wed, 08 Jul 2009 15:31:37 -0500 |
- |
-x2vnc (1.7.2-1) unstable; urgency=low |
- |
- * New upstream release. |
- Closes: #466290. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 25 Mar 2008 10:45:34 +0100 |
- |
-x2vnc (1.7.1-3) unstable; urgency=low |
- |
- * Removed build dependency on libvncauth-dev. |
- * Removed suggests on vnc-common. Instead suggest vncservers and vncviewers. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 4 Mar 2008 18:38:58 +0100 |
- |
-x2vnc (1.7.1-2) unstable; urgency=low |
- |
- * Made sure that it can compile even if the install target point it to |
- correct place, closes: #368506. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 29 May 2006 22:12:45 +0200 |
- |
-x2vnc (1.7.1-1) unstable; urgency=low |
- |
- * New upstream release. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 22 May 2006 20:03:23 +0200 |
- |
-x2vnc (1.6.1-1) unstable; urgency=low |
- |
- * New upstream release. |
- * Applied patch from Martin Dorey <martin.dorey@bluearc.com> to fix an |
- issue on amd64, closes: #343274. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 11 Mar 2006 17:30:13 +0100 |
- |
-x2vnc (1.6-4) unstable; urgency=low |
- |
- * Maintainer upload, closes: #349108, #346786. |
- * Fixed typo in description, closes: #300047. |
- * Updated standards version to 3.6.2. |
- * Added listen option to manpage, closes: #317148. |
- Thanks to Rob Sims <debbugs-z@robsims.com> for the patch. |
- * Moved to debhelper 2 compatibility. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 29 Jan 2006 15:06:35 +0100 |
- |
-x2vnc (1.6-3.1) unstable; urgency=low |
- |
- * Non-maintainer upload. |
- * Replace build-dependency on xlibs-dev with an explicit build-dependency |
- on each required package. (Closes: #346786) |
- |
- -- Steinar H. Gunderson <sesse@debian.org> Sat, 21 Jan 2006 02:18:10 +0100 |
- |
-x2vnc (1.6-3) unstable; urgency=low |
- |
- * Fixed package description, closes: #268549, #277241. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 25 Dec 2004 21:55:57 +0100 |
- |
-x2vnc (1.6-2) unstable; urgency=low |
- |
- * Patched to make cut and paste work in KDE apps, closes: #191697. |
- Thanks to "Martin Dorey" <mdorey@bluearc.com> for the patch. |
- * Moved from /usr/X11R6 to /usr. |
- * Fixed manpage section error, 1x != x. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 26 Aug 2004 18:32:37 +0200 |
- |
-x2vnc (1.6-1) unstable; urgency=low |
- |
- * New upstream release, closes: #233620. |
- This also fix a cut-and-paste bug, closes: #191697. |
- * Updated standards version to 3.6.1. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 28 Jul 2004 19:07:44 +0200 |
- |
-x2vnc (1.5.1-2) unstable; urgency=low |
- |
- * Added build dependency on xlibs-dev, closes: #238618. |
- |
- -- Ola Lundqvist <opal@debian.org> Sat, 20 Mar 2004 15:28:27 +0100 |
- |
-x2vnc (1.5.1-1) unstable; urgency=low |
- |
- * New upstream version, closes: #205131, #160333, #206418. |
- * Updated standards version from 3.5.2 to 2.5.10. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 31 Aug 2003 15:59:27 +0200 |
- |
-x2vnc (1.4-2) unstable; urgency=low |
- |
- * Changed from xlib6g-dev to libxaw7-dev, closes: #170180. |
- |
- -- Ola Lundqvist <opal@debian.org> Fri, 22 Nov 2002 08:26:03 +0100 |
- |
-x2vnc (1.4-1) unstable; urgency=low |
- |
- * New upstream version, closes: #148341. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 29 Aug 2002 07:27:49 +0200 |
- |
-x2vnc (1.3-1) unstable; urgency=low |
- |
- * New upstream version, closes: #123688, #120473. |
- * Updated standards version. |
- * Removed depricated dh_testversion. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 3 Apr 2002 22:37:07 +0200 |
- |
-x2vnc (1.2-2) unstable; urgency=low |
- |
- * The upstream wheel patch scrolled up when scrolling down and |
- vice vera. Fixed with patch by Evan Martin <eeyem@u.washington.edu>, |
- closes: #90142. |
- |
- -- Ola Lundqvist <opal@debian.org> Mon, 19 Mar 2001 22:13:32 +0100 |
- |
-x2vnc (1.2-1) unstable; urgency=low |
- |
- * New upstream version with mouse wheel support built in. Hope that |
- it works equally good or better than the patches I have applied. |
- |
- -- Ola Lundqvist <opal@debian.org> Wed, 14 Mar 2001 15:45:35 +0100 |
- |
-x2vnc (1.1-6) unstable; urgency=low |
- |
- * Added a patch from Evan Martin <eeyem@u.washington.edu> that fixes |
- issues with the wheel patch, closes: Bug#88716. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 22 Feb 2001 22:44:12 +0100 |
- |
-x2vnc (1.1-5) unstable; urgency=low |
- |
- * Added xutils to build depends, closes: Bug#86586. |
- |
- -- Ola Lundqvist <opal@debian.org> Thu, 22 Feb 2001 22:44:12 +0100 |
- |
-x2vnc (1.1-4) unstable; urgency=low |
- |
- * Added suggestion of vnc-common, closes: Bug#81576. |
- |
- -- Ola Lundqvist <opal@debian.org> Fri, 2 Feb 2001 13:03:46 +0100 |
- |
-x2vnc (1.1-3) unstable; urgency=low |
- |
- * Readded dh_testversion and added a versioned debhelper dependency in the |
- control file as it really should be, closes: Bug#78573. |
- |
- -- Ola Lundqvist <opal@debian.org> Sun, 3 Dec 2000 23:40:34 +0100 |
- |
-x2vnc (1.1-2) unstable; urgency=low |
- |
- * Recompiled to indicate new maintainer and to make sure that it |
- works with the new c library. |
- * Have also applied the x2vnc-wheel-patch (found on freshmeat). |
- * Removed dh_testversion that lintian complains about from the |
- debian/rules file. |
- |
- -- Ola Lundqvist <opal@debian.org> Tue, 21 Nov 2000 23:16:10 +0100 |
- |
-x2vnc (1.1-1) unstable; urgency=low |
- |
- * New upstream release |
- |
- -- Edward Betts <edward@debian.org> Sun, 21 May 2000 13:10:44 +0100 |
- |
-x2vnc (1.0-5) unstable; urgency=low |
- |
- * Imakefile: modified to compile against libvncauth0 |
- * debian/control: updateded Standards-Version to 3.1.1 |
- * debian/control: added Build-Depends. |
- * debian/rules: rewritten. |
- * debian/rules: added xmkmf. |
- |
- -- Edward Betts <edward@debian.org> Thu, 6 Jan 2000 23:59:45 +0000 |
- |
-x2vnc (1.0-4) unstable; urgency=low |
- |
- * Changed to Debhelper 2.0 |
- * Updated Standards-Version: 3.0.1 |
- * Lintian clean |
- * Changed location of GPL to /usr/share/common-licenses/GPL |
- |
- -- Edward Betts <edward@debian.org> Sun, 12 Sep 1999 12:01:26 +0100 |
- |
-x2vnc (1.0-3) unstable; urgency=low |
- |
- * Corrected spelling of maintainers name in control (oops!) |
- * Passes Lintian v0.9.5 |
- |
- -- Edward Betts <edward@debian.org> Sun, 12 Sep 1999 12:01:15 +0100 |
- |
-x2vnc (1.0-2) unstable; urgency=low |
- |
- * Improve man page |
- * Fixed source packaging - now includes pristine source |
- |
- -- Edward Betts <edward@debian.org> Sun, 6 Dec 1998 11:44:48 +0000 |
- |
-x2vnc (1.0-1) unstable; urgency=low |
- |
- * Initial Release |
- * Wrote a man page for x2vnc |
- * Passes Lintian v0.9.4 |
- |
- -- Edward Betts <edward@debian.org> Fri, 4 Dec 1998 14:25:08 +0000 |
Index: tags/1.7.2-4/debian/patches/series |
=================================================================== |
--- tags/1.7.2-4/debian/patches/series (revision 33) |
+++ tags/1.7.2-4/debian/patches/series (nonexistent) |
@@ -1,3 +0,0 @@ |
-multiscreen-cursor-stick.patch |
-man-listen.patch |
-format-security.patch |
Index: tags/1.7.2-4/debian/patches/format-security.patch |
=================================================================== |
--- tags/1.7.2-4/debian/patches/format-security.patch (revision 33) |
+++ tags/1.7.2-4/debian/patches/format-security.patch (nonexistent) |
@@ -1,97 +0,0 @@ |
-Description: Fix incorrect use of fprintf() |
-Author: Magnus Holmgren <holmgren@debian.org> |
- |
---- a/sockets.c |
-+++ b/sockets.c |
-@@ -50,7 +50,7 @@ ReadExact(int sock, char *buf, int n) |
- j = read(sock, buf + i, (n - i)); |
- if (j <= 0) { |
- if (j < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": read"); |
- } else { |
- if (errorMessageFromReadExact) { |
-@@ -81,7 +81,7 @@ WriteExact(int sock, char *buf, int n) |
- j = write(sock, buf + i, (n - i)); |
- if (j <= 0) { |
- if (j < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": write"); |
- } else { |
- fprintf(stderr,"%s: write failed\n",programName); |
-@@ -126,20 +126,20 @@ ConnectToTcpAddr(unsigned int host, int |
- |
- sock = socket(AF_INET, SOCK_STREAM, 0); |
- if (sock < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ConnectToTcpAddr: socket"); |
- return -1; |
- } |
- |
- if (connect(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ConnectToTcpAddr: connect"); |
- close(sock); |
- return -1; |
- } |
- |
- if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, (char *)&one, sizeof(one)) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ConnectToTcpAddr: setsockopt"); |
- close(sock); |
- return -1; |
-@@ -167,28 +167,28 @@ ListenAtTcpPort(int port) |
- |
- sock = socket(AF_INET, SOCK_STREAM, 0); |
- if (sock < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ListenAtTcpPort: socket"); |
- return -1; |
- } |
- |
- if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, |
- (const char *)&one, sizeof(one)) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ListenAtTcpPort: setsockopt"); |
- close(sock); |
- return -1; |
- } |
- |
- if (bind(sock, (struct sockaddr *)&addr, sizeof(addr)) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ListenAtTcpPort: bind"); |
- close(sock); |
- return -1; |
- } |
- |
- if (listen(sock, 5) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": ListenAtTcpPort: listen"); |
- close(sock); |
- return -1; |
-@@ -244,14 +244,14 @@ AcceptTcpConnection(int listenSock) |
- |
- sock = accept(listenSock, (struct sockaddr *) &addr, &addrlen); |
- if (sock < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": AcceptTcpConnection: accept"); |
- return -1; |
- } |
- |
- if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, |
- (char *)&one, sizeof(one)) < 0) { |
-- fprintf(stderr,programName); |
-+ fprintf(stderr,"%s",programName); |
- perror(": AcceptTcpConnection: setsockopt"); |
- close(sock); |
- return -1; |
Index: tags/1.7.2-4/debian/patches/multiscreen-cursor-stick.patch |
=================================================================== |
--- tags/1.7.2-4/debian/patches/multiscreen-cursor-stick.patch (revision 33) |
+++ tags/1.7.2-4/debian/patches/multiscreen-cursor-stick.patch (nonexistent) |
@@ -1,24 +0,0 @@ |
-Description: Fix a sticking cursor in a multi-screen configuration |
- When x2vnc is compiled with Xinerama support and runs with a multiscreen setup, |
- the cursor can become stuck on the border between the local and remote screens, |
- not moving further than the border, as it should do. |
-Author: Will Shackleton <w.shackleton@gmail.com> |
-Bug-Debian: http://bugs.debian.org/616396 |
-Bug-Ubuntu: https://launchpad.net/bugs/726783 |
-Forwarded: yes |
- |
---- a/x.c 2008-03-25 10:45:34 +0000 |
-+++ b/x.c 2011-03-03 23:34:29 +0000 |
-@@ -848,9 +848,9 @@ |
- { |
- int n,ret=a.x; |
- if(a.y < ret) ret=a.y; |
-- n=displayHeight - a.y; |
-+ n=y_offset + displayHeight - a.y; |
- if(n < ret) ret=n; |
-- n=displayWidth - a.x; |
-+ n=x_offset + displayWidth - a.x; |
- if(n < ret) ret=n; |
- return ret; |
- } |
- |
Index: tags/1.7.2-4/debian/patches/man-listen.patch |
=================================================================== |
--- tags/1.7.2-4/debian/patches/man-listen.patch (revision 33) |
+++ tags/1.7.2-4/debian/patches/man-listen.patch (nonexistent) |
@@ -1,36 +0,0 @@ |
-Bug-Debian: http://bugs.debian.org/317148 |
-Description: Add listen option to manpage |
-Author: Rob Sims <debbugs-z@robsims.com> |
- |
---- x2vnc-1.7.2.orig/x2vnc.man |
-+++ x2vnc-1.7.2/x2vnc.man |
-@@ -5,7 +5,12 @@ x2vnc \- a dual-screen hack |
- .SH SYNOPSIS |
- .B x2vnc |
- .I <options> |
--.I host:0 |
-+.I <host>:<display#> |
-+.br |
-+.B x2vnc |
-+.I <options> |
-+.I -listen |
-+.I [<display#>] |
- .br |
- [ |
- .B \-display |
-@@ -126,6 +131,15 @@ be running X-window, and the second comp |
- running which will update the contents on the actual screen. This means |
- \fIXvnc\fR is not suitable, but \fIWinVNC\fR is. |
- |
-+In listen mode ( |
-+.B -listen |
-+option specified ) |
-+.I x2vnc |
-+will wait for a connection from a VNC server on ports 5400 and 5500 (plus |
-+the optional |
-+.I display# |
-+value) instead of connecting to a specified VNC server. |
-+ |
- For up-to-date information on x2vnc, see the x2vnc home page: |
- .B http://fredrik.hubbe.net/x2vnc.html |
- |
Index: tags/1.7.2-4/debian/copyright |
=================================================================== |
--- tags/1.7.2-4/debian/copyright (revision 33) |
+++ tags/1.7.2-4/debian/copyright (nonexistent) |
@@ -1,27 +0,0 @@ |
-x2vnc was Written by Fredrik Hübinette <hubbe@hubbe.net> |
-Based on ideas from x2x and code from vncviewer. |
- |
-It was packaged for use with Debian GNU/Linux by |
-Edward Betts <edward@debian.org> |
- |
-The x2vnc-wheel-patch was applied by the new maintainer Ola Lundqvist |
-<opal@debian.org>. This patch was written by bryan d. berg <km@underworld.net> |
-and found on freshmeat: http://freshmeat.net/projects/x2vnc-wheel-patch/ |
- |
-The latest version of this program should be available from |
- |
- http://fredrik.hubbe.net/x2vnc.html |
- |
-For more info about VNC: http://www.uk.research.att.com/vnc/ |
-For more info about x2x: http://ftp.digital.com/pub/Digital/SRC/x2x/ |
- |
-The code is: |
-Copyright (C) 1997, 1998 Olivetti & Oracle Research Laboratory |
- |
-This is free software; you can redistribute it and/or modify |
-it under the terms of the GNU General Public License as published by |
-the Free Software Foundation; either version 2 of the License, or |
-(at your option) any later version. |
- |
-On Debian GNU/Linux systems, the complete text of the GNU General |
-Public License can be found in `/usr/share/common-licenses/GPL'. |
Index: tags/1.7.2-4/debian/docs |
=================================================================== |
--- tags/1.7.2-4/debian/docs (revision 33) |
+++ tags/1.7.2-4/debian/docs (nonexistent) |
@@ -1 +0,0 @@ |
-README |
Index: tags/1.7.2-4/debian/rules |
=================================================================== |
--- tags/1.7.2-4/debian/rules (revision 33) |
+++ tags/1.7.2-4/debian/rules (nonexistent) |
@@ -1,79 +0,0 @@ |
-#!/usr/bin/make -f |
-# debian/rules for freesweep |
-# modifications by Edward Betts <edward@debian.org> |
-# Based on: |
-# Sample debian/rules that uses debhelper. |
-# GNU copyright 1997 to 1999 by Joey Hess. |
- |
-# Uncomment this to turn on verbose mode. |
-#export DH_VERBOSE=1 |
- |
-DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) |
-DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) |
- |
-ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) |
- buildflags = --build=$(DEB_BUILD_GNU_TYPE) |
-else |
- buildflags = --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE) |
-endif |
- |
-config-stamp: configure |
- dh_testdir |
- ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) \ |
- --prefix=/usr \ |
- --mandir=\$${prefix}/share/man \ |
- $(shell dpkg-buildflags --export=configure) |
- touch config-stamp |
- |
-build: build-arch |
-build-indep: |
-build-arch: build-stamp |
-build-stamp: config-stamp |
- dh_testdir |
- |
- $(MAKE) |
- |
- touch build-stamp |
- |
-clean: |
- dh_testdir |
- dh_testroot |
- rm -f build-stamp |
- |
- [ ! -f Makefile ] || $(MAKE) clean |
- |
- dh_clean config-stamp Makefile config.status config.log config.cache |
- |
-install: build |
- dh_testdir |
- dh_testroot |
- dh_clean -k |
- |
- install -m 755 -d $(CURDIR)/debian/x2vnc/usr/share |
- $(MAKE) DESTDIR=$(CURDIR)/debian/x2vnc install |
- |
-# Build architecture-independent files here. |
-binary-indep: |
-# We have nothing to do by default. |
- |
-# Build architecture-dependent files here. |
-binary-arch: build install |
- dh_testdir |
- dh_testroot |
- dh_installdocs |
- dh_installexamples |
- dh_installmenu |
-# dh_installmanpages |
- dh_installchangelogs |
- dh_link |
- dh_strip |
- dh_compress |
- dh_fixperms |
- dh_installdeb |
- dh_shlibdeps |
- dh_gencontrol |
- dh_md5sums |
- dh_builddeb |
- |
-binary: binary-indep binary-arch |
-.PHONY: build-arch build-indep build clean binary-indep binary-arch binary install |
/tags/1.7.2-4/debian/rules |
Property changes: |
Deleted: svn:executable |
## -1 +0,0 ## |
-* |
\ No newline at end of property |
Index: tags/1.7.2-4/debian |
=================================================================== |
--- tags/1.7.2-4/debian (revision 33) |
+++ tags/1.7.2-4/debian (nonexistent) |
/tags/1.7.2-4/debian |
Property changes: |
Deleted: mergeWithUpstream |
## -1 +0,0 ## |
-1 |
\ No newline at end of property |